S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Yamaha OEM 25-300 HP Trim and Tilt Switch - 69J-82563-00-00
Yamaha 150-300 HP 4-Stroke
2002-2009
| Quantity | Price |
| 1 | 65.99 |
Yamaha OEM 69J-82563-00-00 Trim and Tilt Switch
The Yamaha 69J-82563-00-00 Trim and Tilt Switch is a genuine Yamaha OEM power trim and tilt switch used on select Yamaha outboards across multiple engine families.
Supplied Yamaha application data shows this switch on select 25-300 HP 2-stroke and 4-stroke outboards, including F, LF, T, VF, VZ, Z, and LZ-series engines. Yamaha 69J-82563-01-00 supersedes the original 69J-82563-00-00 part number.
Product Information
- Part Number: 69J-82563-00-00
- Brand: Genuine Yamaha OEM
- Part Type: Power Trim and Tilt Switch
- General Fitment: Select Yamaha 25-300 HP
- Engine Types: Select 2-Stroke and 4-Stroke Applications
- Superseded To: 69J-82563-01-00
- Aftermarket Alternative: Pro Marine 69J82563P
Important Fitment Note
This switch does not fit every Yamaha outboard from 25-300 HP. The horsepower range is a convenient summary of the supplied Yamaha application data.
Yamaha used different trim and tilt switches depending on engine family, model year, control configuration, and rigging system.
Verify the complete Yamaha engine model and, whenever possible, the original trim-switch part number before ordering.
OEM and Cross Reference Numbers
| Part Number | Relationship |
|---|---|
| 69J-82563-00-00 | Yamaha OEM Original Number |
| 69J-82563-01-00 | Yamaha OEM - Supersedes 69J-82563-00-00 |
| 704-82563-40-00 | Earlier Yamaha Cross Reference |
| 704-82563-41-00 | Earlier Yamaha Cross Reference |
| 704-82563-42-00 | Later Yamaha 704-Series Reference |
| 69J82563P | Pro Marine Aftermarket Alternative |
What This Part is Used For
The trim and tilt switch provides operator input to the power trim and tilt system on compatible Yamaha outboards.
Pressing the switch commands the system to raise or lower the engine. This allows the operator to adjust engine angle during operation and to raise the outboard farther when appropriate for trailering, servicing, or shallow-water situations.
Compatible Yamaha Applications
The supplied Yamaha catalog application data has been interpreted below into engine families and useful year ranges. These ranges represent the listed applications for this switch and should not be interpreted as universal fitment for every engine of the same horsepower.
| Yamaha Engine Family | Years | Engine Type |
|---|---|---|
| F25 / T25 | 2006-Present | 4-Stroke |
| F40 | 2006-Present | 4-Stroke |
| F50 / T50 | 2006-Present | 4-Stroke |
| F60 / T60 | 2006-Present | 4-Stroke |
| F70 | 2006-Present | 4-Stroke |
| F115 / LF115 | 2006-Present | 4-Stroke |
| VF115 SHO | 2006-Present | 4-Stroke |
| F130 / LF130 | 2006-Present | 4-Stroke |
| F150 / LF150 / FL150 | 2004-Present | 4-Stroke |
| VF150 SHO | 2006-Present | 4-Stroke |
| F175 | 2006-Present | 4-Stroke |
| VF175 SHO | 2006-Present | 4-Stroke |
| F200 / LF200 | 2002-Present | 4-Stroke |
| VF200 SHO | 2006-Present | 4-Stroke |
| VZ200 HPDI | 2005-Present | 2-Stroke HPDI |
| F225 / LF225 | 2002-Present | 4-Stroke |
| VF225 SHO | 2006-Present | 4-Stroke |
| VZ225 HPDI | 2003-Present | 2-Stroke HPDI |
| F250 / LF250 | 2005-Present | 4-Stroke |
| VF250 SHO | 2006-Present | 4-Stroke |
| VZ250 HPDI | 2003-Present | 2-Stroke HPDI |
| Z250 / LZ250 HPDI | 2003-Present | 2-Stroke HPDI |
| F300 / LF300 | 2006-Present | 4-Stroke |
| VZ300 HPDI | 2004-Present | 2-Stroke HPDI |
| Z300 / LZ300 HPDI | 2004-Present | 2-Stroke HPDI |
Pro Marine 69J82563P Trim and Tilt Switch
Looking for an aftermarket alternative? Pro Marine USA also offers 69J82563P for compatible applications covered by this Yamaha trim-switch family.
Common Symptoms and Replacement Reasons
- Trim or tilt does not respond when the switch is pressed.
- UP or DOWN function works intermittently.
- One direction works while the other does not.
- Switch button or housing is physically damaged.
- Wiring or connector at the switch is damaged or corroded.
- Water intrusion has caused unreliable switch operation.
- Original switch is being replaced during Yamaha engine service or restoration.
A failed trim function does not automatically mean the trim switch is defective. Wiring, connectors, relays, fuses, battery voltage, and the trim motor should also be inspected during diagnosis.
Installation Tips
- Disconnect battery power before servicing the trim and tilt electrical system.
- Compare the replacement switch, connector, and wiring with the original part before installation.
- Inspect mating terminals and nearby wiring for corrosion or damage.
- Route and secure wiring so it cannot be pinched, pulled, or chafed.
- After installation, test both the UP and DOWN functions.
Key Features and Benefits
- Genuine Yamaha OEM: Factory Yamaha replacement component.
- Original Equipment Fit: Designed for the specifically listed Yamaha applications.
- Wide Catalog Coverage: Found across select Yamaha 25-300 HP engine families.
- 2-Stroke and 4-Stroke Applications: Includes specific four-stroke, SHO, and HPDI families.
- Superseded OEM Number: 69J-82563-01-00 replaces 69J-82563-00-00.
- Aftermarket Option Available: Pro Marine 69J82563P is available as an alternative.
Frequently Asked Questions
What does Yamaha 69J-82563-00-00 fit?
The supplied Yamaha application data lists this trim and tilt switch on select Yamaha 25-300 HP outboards, including specific F, LF, T, VF, VZ, Z, and LZ engine families.
Does it fit every Yamaha 25-300 HP outboard?
No. The horsepower range summarizes the listed applications. Fitment depends on the exact Yamaha model, year, and trim-switch configuration.
What supersedes Yamaha 69J-82563-00-00?
Yamaha 69J-82563-01-00 supersedes 69J-82563-00-00.
Is this a genuine Yamaha part?
Yes. This listing is for the genuine Yamaha OEM trim and tilt switch.
Does this fit Yamaha SHO outboards?
The supplied catalog data includes specific VF115, VF150, VF175, VF200, VF225, and VF250 SHO applications. Verify the complete engine model before ordering.
Does this fit Yamaha HPDI engines?
The supplied catalog data includes specific VZ, Z, and LZ-series HPDI applications from 200 through 300 HP. Exact model verification is required.
If my trim does not work, is the switch definitely bad?
No. A power trim problem can also be caused by wiring, connectors, relays, fuses, battery voltage, or the trim motor. Diagnose the system before replacing components.
Is a less expensive aftermarket version available?
Yes. Pro Marine USA also offers the Pro Marine 69J82563P trim and tilt switch for compatible applications.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
69J-82563-00-00, 69J-82563-01-00, 704-82563-40-00, 704-82563-41-00, 704-82563-42-00, 69J82563P, 69J825630000, 69J825630100, 704825634000, 704825634100, 704825634200
Searchable Terms
Yamaha OEM trim switch, Yamaha trim and tilt switch, Yamaha power trim switch, Yamaha 25-300 HP trim switch, Yamaha 2-stroke trim switch, Yamaha 4-stroke trim switch, Yamaha SHO trim switch, Yamaha HPDI trim switch, Yamaha F150 trim switch, Yamaha F200 trim switch, Yamaha F225 trim switch, Yamaha F250 trim switch, Yamaha F300 trim switch, Yamaha VF250 trim switch, Yamaha VZ250 trim switch, 69J-82563-00-00, 69J-82563-01-00