Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Chrysler & Force Outboard Parts

Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.

Shop Chrysler / Force Outboard Parts by System

Find the Correct Chrysler or Force Outboard Part

Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.

Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.

Use Our OEM Parts Lookup »

Common Chrysler & Force Outboard Engine Families

Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.

  • Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
  • Midrange: popular 35HP through 85HP applications across multiple engine generations
  • Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
  • High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
  • Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications

Common Chrysler & Force Repair and Rebuild Problems

  • No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
  • Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
  • Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
  • Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
  • Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
  • Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.

Repair Individual Systems or Build Your Own Rebuild

Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.

Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.

Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?

  • Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
  • Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
  • Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of rebuild and replacement components for older outboard engines.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Chrysler or Force outboard part?

Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.

Can I search Chrysler and Force parts by OEM part number?

Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.

Do Chrysler and Force outboard parts interchange?

Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.

Do you carry parts for older Force outboards?

Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.

Do you carry Chrysler outboard engine rebuild parts?

Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.

What Chrysler and Force parts are commonly replaced during maintenance?

Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.

Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

← Back to Outboard

|◀ ◀ 673 - 684 of 999 ▶ ▶|
View:
Mercury 40-115 EFI 4 Stroke All Verado Honda BF 225-250D
Item#:
8798P
Cross Reference#:
HZVL16910003
16910-ZVL-003
8M0153652
879885K
879885Q
879885T
Manufacturer Item:
879885Q
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
11.13
Each
Racor Style 1/4" NPT Aluminum Includes 1/4 Fuel Fitting
Item#:
7853P
Cross Reference#:
MAR-FLTHD-AL-12
18-7853-1
55481
89876
89876A3
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
30.85
Each
Racor Style 10 Micron
Item#:
7919P
Cross Reference#:
18-7919
35-809097
8M0103095
8M0146203
809097
Manufacturer Item:
809097
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
09/17/2026
Your Price:
22.22
Each
Item#:
3-3802
Cross Reference#:
39729338026
Manufacturer:
Moeller
Available:
In Stock
Your Price:
24.29
Each
1/4"NPT/ 3/8" Barb For Fuel Tanks
Item#:
3-3801
Cross Reference#:
39729338019
Manufacturer:
Moeller
Available:
In Stock
Your Price:
19.39
Each
Hydraulic Steering Cylinder Bleed Kit for Pro Marine SeaStar & Uflex System

Hydraulic Steering Cylinder Bleed Kit

Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit

The Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit is designed to simplify hydraulic steering system bleeding and service procedures for marine hydraulic steering applications.

This bleed kit is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.

What a Hydraulic Steering Bleed Kit Does

A hydraulic steering bleed kit helps remove trapped air from the steering system during installation, maintenance, or repair procedures.

Proper bleeding allows hydraulic fluid to fully circulate through the helm, hoses, and steering cylinder, helping restore smooth steering feel and consistent steering response.

Pro Tip: Air trapped inside a hydraulic steering system can cause soft steering feel, steering hesitation, noise, or inconsistent steering response. Proper bleeding is one of the most important steps during hydraulic steering installation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Hydraulic Steering Installation Bleeding air from newly installed steering systems
Hydraulic Steering Service Routine steering maintenance and repairs
Steering Cylinder Replacement Bleeding the system after cylinder installation
Repower Projects Completing hydraulic steering upgrades
Marine Repair Shops Professional hydraulic steering service work

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Hydraulic Fluid

Use quality hydraulic steering fluid during steering filling and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Fill Hose Assembly

Fill hose assemblies simplify steering fluid filling and help maintain fluid supply during bleeding.

View 102P Fill Hose Assembly

Hydraulic Steering Components

Shop compatible helm pumps, cylinders, hydraulic hoses, and steering service components.

Shop Hydraulic Steering Components

Key Features and Benefits

  • Designed for hydraulic steering system bleeding
  • Helps remove trapped air from steering cylinders and hoses
  • Improves steering response and steering feel
  • Useful during installation and maintenance procedures
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Useful for marine technicians and DIY boat owners
  • Helps simplify hydraulic steering service work

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Hydraulic steering bleed kit
  • Function: Steering system bleeding and air removal
  • Connection Type: Steering cylinder bleed fittings
  • Typical Use: Hydraulic steering installation and maintenance
  • Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
  • Related Components: Helm pumps, steering cylinders, hydraulic hoses, fill hose assemblies, and steering fluid

FAQ

What does a hydraulic steering bleed kit do?
A bleed kit helps remove trapped air from the hydraulic steering system during installation or service procedures.

Why is bleeding hydraulic steering important?
Proper bleeding removes trapped air that can cause soft steering feel, inconsistent response, or steering noise.

What steering systems is this compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar systems.

Can this be used for new steering installations?
Yes. Bleeding is required during most new hydraulic steering installations and cylinder replacements.

Is this useful for DIY steering service?
Yes. This bleed kit helps simplify the steering bleeding process for both professional technicians and DIY boat owners.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-BLEEDKIT, hydraulic steering bleed kit, hydraulic cylinder bleed kit, Pro Marine bleed kit, SeaStar bleed kit, Uflex bleed kit, steering cylinder bleed hose, hydraulic steering service kit, hydraulic steering maintenance tools, steering bleed fittings

Item#:
350-BLEEDKIT
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
66.22
Each
Item#:
350-HSTEER-ROD
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
318.27
Each
This item is discontinued
Item#:
92072
Manufacturer:
Universal
Available:
Special Order
Your Price:
28.60
Each
This item is discontinued
Mercury Johnson / Evinrude Same as 546-1
Item#:
311227
Cross Reference#:
0175226
0398327
0777714
134301
134301
164941
164941
175226
175226
18-7830
18-7830
275000051
3852224
3852224
398327
40155
65W-24251-00-00
65W-24251-10-00
777714
816296BK2
816296B1
816296B2
816296K2
816296Q1
816296Q2
816296T1
8162961
Manufacturer Item:
816296Q2
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
8.39
Each
Item#:
S413
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
22.04
Each
Wiseco
Item#:
CW12
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
2.99
Each
Wiseco
Item#:
CW16
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
2.99
Each
|◀ ◀ 673 - 684 of 999 ▶ ▶|
View: