Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Chrysler & Force Outboard Parts

Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.

Shop Chrysler / Force Outboard Parts by System

Find the Correct Chrysler or Force Outboard Part

Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.

Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.

Use Our OEM Parts Lookup »

Common Chrysler & Force Outboard Engine Families

Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.

  • Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
  • Midrange: popular 35HP through 85HP applications across multiple engine generations
  • Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
  • High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
  • Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications

Common Chrysler & Force Repair and Rebuild Problems

  • No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
  • Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
  • Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
  • Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
  • Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
  • Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.

Repair Individual Systems or Build Your Own Rebuild

Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.

Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.

Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?

  • Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
  • Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
  • Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of rebuild and replacement components for older outboard engines.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Chrysler or Force outboard part?

Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.

Can I search Chrysler and Force parts by OEM part number?

Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.

Do Chrysler and Force outboard parts interchange?

Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.

Do you carry parts for older Force outboards?

Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.

Do you carry Chrysler outboard engine rebuild parts?

Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.

What Chrysler and Force parts are commonly replaced during maintenance?

Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.

Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

← Back to Outboard

|◀ ◀ 769 - 780 of 999 ▶ ▶|
View:
Transparent 3/16" Tygon Fuel Line for PWC Applications

Transparent Tygon Fuel Hose

3/16" Tygon Fuel Hose - 10ft Length

Pro Marine Item 256 is transparent 3/16" Tygon fuel hose supplied in a convenient 10-foot length. This small-diameter fuel line is commonly used for PWC fuel-system applications where 3/16" inside-diameter hose is required.

The transparent construction makes it easier to visually inspect the fuel line during installation and service and can help identify fuel, air pockets or contamination inside the hose.

Pro Marine stocks several Tygon hose sizes for PWC, outboard, fuel-line, oil-injection and bleed-hose applications. Use the Tygon hose size chart below to quickly compare the available options.

3/16" Tygon Fuel Hose - Item 256

Inside Diameter: 3/16"
Length: 10 Feet
Material: Tygon
Color: Transparent
Application: PWC Fuel Line
Item Number: 256

What This Tygon Fuel Hose is Used For

Item 256 is used for small-diameter fuel-line applications requiring 3/16" Tygon fuel hose. It is particularly useful when servicing PWC fuel systems that use this hose diameter.

Fuel hose can deteriorate with age and exposure to fuel, heat and the operating environment. Hose that has become hard, brittle, cracked, damaged or otherwise deteriorated should be inspected and replaced as needed.

Always verify the required inside diameter and application before replacing an existing fuel hose.

Benefits of Transparent Tygon Fuel Hose

One of the useful characteristics of transparent Tygon hose is the ability to visually inspect the fuel inside the line.

Depending on the system, this can help during fuel-system diagnosis and service by making it easier to identify whether fuel is present in the line and spot obvious air pockets or contamination.

Need a Different Tygon Hose Size?

Pro Marine stocks Tygon hose in several inside diameters. Match the hose size to the fitting and original fuel, oil-injection or bleed-line application.

Use the chart below to compare all of the Tygon hose options in this section.

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft Transparent Tygon small oil-injection hose View 255
256 3/16" 10 ft Transparent Tygon fuel hose for PWC applications Current Product
257 1/4" 10 ft Transparent Tygon fuel hose View 257
258 5/16" 10 ft Transparent Tygon fuel hose View 258
259 1/8" 10 ft Transparent Tygon bleed hose View 259

Other Tygon Hose Options

3/32 Tygon Hose 3/32" Tygon Hose - 255

Transparent small-diameter Tygon hose for PWC oil-injection line applications. Supplied in a 10-foot length.

View 3/32" Tygon Hose
1/4 Tygon Hose 1/4" Tygon Fuel Hose - 257

Transparent 1/4" Tygon fuel hose supplied in a 10-foot length.

View 1/4" Tygon Fuel Hose
5/16 Tygon Hose 5/16" Tygon Fuel Hose - 258

Transparent 5/16" Tygon fuel hose supplied in a 10-foot length.

View 5/16" Tygon Fuel Hose
1/8 Tygon Hose 1/8" Tygon Bleed Hose - 259

Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.

View 1/8" Tygon Bleed Hose

Fuel Line Clamp Tools

Pro Marine also stocks Oetiker installation tools and a complete clamp assortment for marine fuel-line applications that use Oetiker ear clamps. Always match the clamp to the specific hose and fitting being serviced.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Complete Pro Marine Oetiker clamp assortment with the installation tool included. A convenient option for shops and technicians working with multiple marine hose sizes.

View Oetiker Clamp Pack

Choosing the Correct Tygon Hose Size

Tygon hose should be matched to the inside diameter required by the fitting and fuel system. Item 256 has a 3/16" inside diameter.

When replacing existing hose, verify the original hose diameter and the application before installation. Do not substitute another diameter simply because it appears close in size.

When Should Tygon Fuel Hose Be Replaced?

Inspect small fuel lines as part of normal fuel-system service. Replacement should be considered if the hose shows:

  • Cracks or splits
  • Hardening or brittleness
  • Visible deterioration
  • Fuel leakage
  • Loose connections at fittings
  • Damage from abrasion or improper routing

Key Features and Benefits

  • 3/16" inside diameter
  • 10-foot length
  • Transparent Tygon fuel hose
  • Useful for PWC fuel-line applications requiring 3/16" hose
  • Transparent construction allows visual inspection of the fuel line
  • Multiple additional Tygon hose sizes available
  • Oil-injection and bleed-hose options available
  • Oetiker pincer tool available for compatible clamp applications
  • Complete Oetiker clamp pack with tool available

Need Help Choosing the Right Fuel Hose?

Fuel-line diameter, hose type, fittings and clamp selection all need to match the application. Use the Pro Marine Fuel Line Technical Center to compare the different fuel-hose options and related installation parts.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 256?
Item 256 is 3/16" ID Tygon fuel hose.

How much hose is included?
Item 256 is supplied in a 10-foot length.

Is this hose transparent?
Yes. The transparent construction allows visual inspection of the fuel line during service.

Is this hose sold by the foot?
No. Item 256 is supplied as a 10-foot length.

Do you have a smaller Tygon hose?
Yes. Pro Marine stocks item 255 3/32" Tygon hose for small oil-injection line applications.

Do you carry larger Tygon fuel hose?
Yes. Pro Marine also stocks 1/4" Tygon fuel hose and 5/16" Tygon fuel hose .

Do you carry Tygon bleed hose?
Yes. Pro Marine stocks item 259 1/8" Tygon bleed hose .

Do you sell an Oetiker clamp installation tool?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible Oetiker ear-clamp applications.

Do you sell a clamp assortment?
Yes. The Pro Marine CLAMP-PACK includes an assortment of Oetiker clamps and the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers and Terms

256, Tygon 256, 3/16 Tygon hose, 3/16 fuel hose, 3/16 fuel line, PWC fuel hose, PWC fuel line, Tygon fuel hose, transparent fuel hose, transparent fuel line, Tygon tubing, Tygon hose 10ft, small fuel hose, PWC fuel system, 255, 3/32 Tygon hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose

Item#:
256
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
26.00
10 FT LENGTH
Transparent Small Oil Injection Line for PWC Applications

Transparent Tygon Hose

3/32" Tygon Small Oil Injection Hose - 10ft Length

Pro Marine Item 255 is transparent 3/32" Tygon hose supplied in a 10-foot length. This small-diameter flexible tubing is commonly used for PWC oil-injection line applications where 3/32" inside-diameter hose is required.

The transparent construction makes it easier to visually inspect the line and see fluid within the hose, which is particularly useful when servicing small oil-injection systems.

Need another size? Pro Marine stocks a range of Tygon hose from 3/32" through 5/16", including fuel-hose and bleed-hose options. See the complete size chart below.

3/32" Tygon Hose - Item 255

Inside Diameter: 3/32"
Length: 10 Feet
Material: Tygon
Color: Transparent
Primary Application: PWC Small Oil Injection Line
Item Number: 255

What This Tygon Hose is Used For

Item 255 is intended for small-diameter fluid-line applications requiring 3/32" Tygon tubing. Pro Marine lists this hose primarily for PWC small oil-injection line applications.

Small oil-injection hoses can become hard, brittle, cracked or damaged with age. Replacing deteriorated tubing is an important part of servicing an oil-injected PWC or other compatible system.

Always verify the required inside diameter and application before replacing an existing hose.

Why Use Transparent Tygon Hose?

Transparent tubing provides an important advantage on small fluid lines: it allows the technician to visually inspect what is happening inside the hose.

Depending on the system, this can make it easier to check for fluid in the line and identify obvious air pockets or contamination during service.

Need a Different Tygon Hose Size?

Pro Marine stocks multiple transparent Tygon hose sizes for PWC, outboard, fuel-line, oil-injection and bleed-hose applications.

Use the size chart below to compare the available options and go directly to the correct product page.

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft PWC small oil-injection line - transparent View 255
256 3/16" 10 ft PWC transparent Tygon fuel hose View 256
257 1/4" 10 ft PWC transparent fuel hose / MerCruiser pump-to-carb applications View 257
258 5/16" 10 ft PWC and outboard transparent Tygon fuel hose View 258
259 1/8" 10 ft Universal transparent Tygon bleed hose View 259

Other Tygon Hose Options

3/16 Tygon Hose 3/16" Tygon Fuel Hose - 256

Transparent 3/16" Tygon fuel hose for PWC applications. Supplied in a 10-foot length.

View 3/16" Tygon Hose
1/4 Tygon Hose 1/4" Tygon Fuel Hose - 257

Transparent 1/4" Tygon fuel hose for PWC and listed MerCruiser pump-to-carb applications.

View 1/4" Tygon Hose
5/16 Tygon Hose 5/16" Tygon Fuel Hose - 258

Transparent 5/16" Tygon fuel hose for PWC and outboard applications. Supplied in a 10-foot length.

View 5/16" Tygon Hose
1/8 Tygon Hose 1/8" Tygon Bleed Hose - 259

Universal transparent 1/8" Tygon bleed hose supplied in a 10-foot length.

View 1/8" Tygon Bleed Hose

Fuel Line Clamp Tools

When servicing marine fuel, oil-injection and bleed-line systems, Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for applications that use Oetiker ear clamps.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Pro Marine clamp assortment containing 130 pieces plus the installation tool. A convenient option for marine shops and technicians servicing multiple hose sizes.

View Oetiker Clamp Pack

Choosing the Correct Tygon Hose Size

Hose size should be matched to the fitting and system being serviced. Do not substitute a larger or smaller hose simply because it appears close in size.

For an existing oil-injection, fuel or bleed-line system, compare the original hose size and application before replacement. If the application is uncertain, verify the engine or PWC model and the required hose size before installation.

Key Features and Benefits

  • 3/32" inside diameter Tygon tubing
  • 10-foot length
  • Transparent construction
  • Designed for small oil-injection line applications
  • Commonly used in PWC service applications
  • Allows visual inspection of fluid inside the hose
  • Additional Tygon sizes available from 3/16" through 5/16"
  • 1/8" Tygon bleed hose also available
  • Oetiker pincer tool available for compatible ear-clamp applications
  • Complete Pro Marine Oetiker clamp pack and tool available

Need Help Choosing the Right Hose?

Hose diameter and application both matter when replacing marine fuel, oil-injection and bleed lines. Pro Marine's Fuel Line Technical Center brings together our hose sizes, fuel-line classifications, clamps and related installation information.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 255?
Item 255 is 3/32" ID Tygon hose supplied in a 10-foot length.

What is 3/32" Tygon hose used for?
Pro Marine lists item 255 primarily for PWC small oil-injection line applications.

Is the hose transparent?
Yes. Item 255 is transparent, allowing the line and fluid inside it to be visually inspected.

Is this hose sold by the foot?
No. Item 255 is supplied as a 10-foot length.

Do you carry larger Tygon fuel hose?
Yes. Pro Marine stocks 3/16", 1/4" and 5/16" transparent Tygon fuel hose.

Do you carry Tygon bleed hose?
Yes. Pro Marine stocks item 259 1/8" Tygon bleed hose in a 10-foot length.

Do you sell an Oetiker clamp installation tool?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible Oetiker ear-clamp applications.

Do you sell a complete Oetiker clamp assortment?
Yes. The Pro Marine CLAMP-PACK contains 130 pieces plus the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers & Terms

255, Tygon 255, 3/32 Tygon hose, 3/32 oil injection hose, 3/32 oil line, PWC oil injection hose, PWC oil line, small oil injection line, transparent Tygon tubing, transparent oil hose, Tygon hose 10ft, Tygon tubing, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose

Item#:
255
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
17.00
10FT LENGTH
Item#:
2-382
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
6.69
2 PACK
SAE Type II Bare Copper Strand
Item#:
4R72
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
50.88
Each
SAE Type II Bare Copper Strand
Item#:
4R48
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
33.41
Each
SAE Type II Bare Copper Strand
Item#:
4R24
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
24.63
Each
SAE Type II Bare Copper Strand
Item#:
4R36
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
28.91
Each
Item#:
4-382
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.28
2 PACK
SAE Type II Bare Copper Strand
Item#:
4B72
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
50.88
Each
SAE Type II Bare Copper Strand
Item#:
4B48
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
33.41
Each
SAE Type II Bare Copper Strand
Item#:
4B24
Manufacturer:
Pacer Wire & Connectors
Available:
Out of Stock
Your Price:
24.63
Each
SAE Type II Bare Copper Strand
Item#:
4B36
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
29.13
Each
|◀ ◀ 769 - 780 of 999 ▶ ▶|
View: