S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Chrysler & Force Outboard Parts
Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.
Shop Chrysler / Force Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints for Lower Unit and Engine
- Service Manuals
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Chrysler or Force Outboard Part
Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.
Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.
Use Our OEM Parts Lookup »Common Chrysler & Force Outboard Engine Families
Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.
- Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
- Midrange: popular 35HP through 85HP applications across multiple engine generations
- Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
- High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
- Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications
Common Chrysler & Force Repair and Rebuild Problems
- No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
- Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
- Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
- Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
- Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
- Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.
Repair Individual Systems or Build Your Own Rebuild
Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.
Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.
Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?
- Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
- Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
- Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of rebuild and replacement components for older outboard engines.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Chrysler or Force outboard part?
Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.
Can I search Chrysler and Force parts by OEM part number?
Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.
Do Chrysler and Force outboard parts interchange?
Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.
Do you carry parts for older Force outboards?
Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.
Do you carry Chrysler outboard engine rebuild parts?
Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.
What Chrysler and Force parts are commonly replaced during maintenance?
Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.
Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Marine Fuel Tank Fill Hose
1-1/2" Type A2 Marine Fuel Fill Hose - FILLHOSE-112
FILLHOSE-112 is a 1-1/2" marine Type A2 fuel fill hose designed for the large-diameter fuel connection between the boat's deck-mounted gas fill and fuel tank.
Fuel fill hose is different from the smaller fuel-supply hose that carries gasoline from the tank to the engine. Its job is to safely route fuel from the deck fill fitting into the tank while providing the larger diameter needed during refueling.
Pro Marine also stocks the matching 4-8 German-style stainless-steel hose clamp, a 1-1/2" chrome gas deck fill, and a larger 2" Type A2 fuel fill hose.
Inside Diameter: 1-1/2"
Hose Type: USCG Type A2
Application: Marine Fuel Fill Line
Connects: Deck Fuel Fill to Fuel Tank
Matching Clamp: 4-8
What This Fuel Fill Hose is Used For
FILLHOSE-112 is intended for the fuel-fill portion of a permanently installed marine fuel system.
In a typical installation, the hose runs from the fitting directly behind the deck-mounted fuel cap down to the fuel tank's fill-neck connection.
Common applications include:
- Boat fuel tank fill hose
- Deck fill to fuel tank connection
- Replacement of aged or deteriorated marine fuel fill hose
- Boat restoration and fuel-system rerigging
- New permanent marine fuel tank installations
What Does USCG Type A2 Mean?
Type A2 is a marine fuel-hose classification used for compatible fuel-system applications including fuel fill and vent lines.
Under federal marine fuel-system requirements, Type A hose is constructed to meet a fire-resistance test. Type A2 is a Class 2 hose designation.
The important application distinction for this product is that Type A2 hose is suitable for a marine fuel fill or vent line. It should not be confused with the smaller Type A1 fuel hose commonly used in fuel-feed applications.
This 1-1/2" hose is intended for the deck fill to fuel tank connection.
Do not select fuel hose only by diameter. Fuel fill, vent and tank-to-engine fuel lines have different applications and hose requirements.
Matching 1-1/2" Fuel Fill Hose Clamp
Matching clamp for the 1-1/2" fuel fill hose installation.
Pro Marine's 4-8 German-style clamp has a 27-51mm / 1.05-1.99" clamping range and is made from 316 stainless steel.
Secure the hose at the deck-fill fitting and fuel-tank fill neck according to the requirements of the installation.
View 4-8 German-Style Hose Clamp1-1/2" Chrome Gas Deck Fill
Universal 1-1/2" chrome gas deck fill for compatible marine fuel systems.
The fuel fill hose connects to the hose barb beneath the deck fill and routes gasoline down to the permanent fuel tank.
View 1-1/2" Chrome Gas Deck Fill1-1/2" and 2" Fuel Fill Hose Options
| Size | Fuel Fill Hose | Type | Matching Clamp |
|---|---|---|---|
| 1-1/2" | FILLHOSE-112 | USCG Type A2 | 4-8 |
| 2" | FILLHOSE-2 | USCG Type A2 | 4-9 |
Need 2" Fuel Fill Hose?
2" Type A2 Fuel Fill Hose - FILLHOSE-2
Larger Type A2 fuel fill hose for marine installations using a 2" tank fill and deck-fill connection.
View 2" Fuel Fill Hose
German-Style Hose Clamp - 4-9
Matching clamp option supplied for Pro Marine's 2" Type A2 fuel fill hose.
View 4-9 Hose ClampFuel Fill Hose Installation Tips
- Match the hose inside diameter to the deck fill and fuel-tank fill connection.
- Use marine fuel hose specifically designed for fuel-fill applications.
- Use properly sized corrosion-resistant hose clamps.
- Make sure the hose is fully seated on each fitting before clamping.
- Avoid sharp bends that can restrict fuel flow while filling the tank.
- Route the hose so it cannot be crushed by batteries, storage or other equipment.
- Keep the hose away from sharp edges and moving components.
- Inspect the entire fill hose for cracking, hardening and deterioration.
- Check all connections for fuel seepage after installation.
Fuel fill hose is large and heavily constructed. Plan the routing before cutting the hose.
A smooth path from the deck fill to the tank helps fuel flow freely during refueling and reduces the chance of creating a low spot, restriction or kink.
When Should Marine Fuel Fill Hose Be Replaced?
Fuel fill hose should be inspected whenever the fuel tank, deck fill or surrounding rigging is serviced.
Consider replacement if you find:
- Cracking in the outer hose
- Dry, hardened or brittle hose
- Soft or swollen areas
- Abrasion or chafing
- Fuel odor around the fill-hose area
- Visible fuel seepage
- Damaged or heavily corroded clamps
- Hose that no longer fits securely on the fill fitting or tank
How the Marine Fuel Fill System Works
When gasoline is added through the deck-mounted gas cap, it travels through the large-diameter fuel fill hose and into the permanent fuel tank.
A separate fuel-tank vent system allows displaced air to escape while the tank is being filled.
The fuel fill hose, deck fill, tank connection and vent system all need to remain correctly routed and unobstructed for reliable refueling.
Key Features and Benefits
- 1-1/2" marine fuel fill hose
- USCG Type A2 hose
- Designed for deck-fill to fuel-tank applications
- Large diameter for marine fuel filling
- Matching 4-8 German-style clamp available
- Matching 1-1/2" chrome deck fill available
- 2" Type A2 fuel fill hose also available
- Useful for new fuel-system installations and replacement projects
FAQ
What size is FILLHOSE-112?
FILLHOSE-112 is 1-1/2" inside-diameter marine fuel fill hose.
What is this hose used for?
It connects the boat's deck-mounted fuel fill to the fill connection on
the permanent marine fuel tank.
Is FILLHOSE-112 Type A2?
Yes. This hose is listed as USCG Type A2.
Can I use this as the fuel hose from the tank to the engine?
This product is intended as large-diameter fuel fill hose. Use the proper
marine fuel-supply hose specified for the tank-to-engine portion of the
fuel system.
Which clamp fits the 1-1/2" fuel fill hose?
Pro Marine pairs it with the
4-8 German-Style Hose Clamp
.
Do you stock a 1-1/2" fuel deck fill?
Yes. Pro Marine stocks the
3-5740 Chrome 1-1/2" Gas Deck Fill
.
Do you have 2" fuel fill hose?
Yes. Pro Marine also stocks
FILLHOSE-2 2" Type A2 Fuel Fill Hose
.
How do I know whether I need 1-1/2" or 2" hose?
Measure or verify the hose connection size on both the deck fill and the
fuel tank. The replacement hose needs to match the fittings used in the
boat's fuel-fill system.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
FILLHOSE-112, 1-1/2 fuel fill hose, 1.5 inch fuel fill hose, Type A2 fuel hose, USCG Type A2 hose, marine fuel fill hose, boat gas fill hose, fuel tank fill hose, deck fill hose, gas tank filler hose, 4-8 hose clamp, 3-5740, FILLHOSE-2, marine fuel tank hose
Marine Fuel Tank Fill Hose
2" Type A2 Marine Fuel Fill Hose - FILLHOSE-2
FILLHOSE-2 is a 2" marine Type A2 fuel fill hose designed for the large-diameter fuel connection between a boat's deck-mounted fuel fill and permanent fuel tank.
This hose is used during refueling to carry gasoline from the deck fill down to the tank. It is different from the smaller fuel-supply hose that carries fuel from the tank to the engine.
Pro Marine also stocks the matching 4-9 German-style hose clamp and a smaller 1-1/2" Type A2 fuel fill hose for installations using 1-1/2" fittings.
Inside Diameter: 2"
Hose Type: USCG Type A2
Application: Marine Fuel Fill Line
Connects: Deck Fuel Fill to Fuel Tank
Matching Clamp: 4-9
What This Fuel Fill Hose is Used For
FILLHOSE-2 is intended for the fuel-fill section of a permanently installed marine fuel system.
In a typical installation, the hose connects the fitting underneath the deck-mounted gas fill to the fill neck on the fuel tank.
Common applications include:
- Boat fuel tank fill hose
- Deck fill to fuel tank plumbing
- Replacement of old or deteriorated fuel fill hose
- Boat restoration and fuel-system rerigging
- New permanent marine fuel-tank installations
What Does Type A2 Fuel Hose Mean?
Type A2 is a marine fuel-hose classification commonly used for fuel fill and vent applications.
The Type A designation indicates a hose intended for marine fuel systems where fire resistance is required. The A2 classification is used for specific fill and vent applications rather than the smaller engine fuel-feed line.
For this product, the important point is that it is designed as a large-diameter marine fuel fill hose.
This 2" hose is intended for the deck fill to fuel tank connection.
Do not use hose diameter alone to choose a marine fuel hose. Fuel fill, vent and engine supply lines have different applications and requirements.
Matching 2" Fuel Fill Hose Clamp
Matching clamp for Pro Marine's 2" Type A2 fuel fill hose.
Use properly sized corrosion-resistant clamps to secure the fuel fill hose at the deck-fill fitting and fuel-tank connection.
View 4-9 German-Style Hose Clamp1-1/2" and 2" Fuel Fill Hose Options
| Size | Fuel Fill Hose | Type | Matching Clamp |
|---|---|---|---|
| 1-1/2" | FILLHOSE-112 | Type A2 | 4-8 |
| 2" | FILLHOSE-2 | Type A2 | 4-9 |
Need 1-1/2" Fuel Fill Hose Instead?
1-1/2" Type A2 Fuel Fill Hose - FILLHOSE-112
Smaller Type A2 marine fuel fill hose for installations using 1-1/2" deck-fill and fuel-tank connections.
View 1-1/2" Fuel Fill Hose
German-Style Hose Clamp - 4-8
Matching clamp for the 1-1/2" Type A2 fuel fill hose.
View 4-8 Hose Clamp1-1/2" Chrome Gas Deck Fill
Pro Marine also stocks a 1-1/2" chrome deck fill for compatible marine fuel systems using 1-1/2" fill hose.
This deck fill is not the matching 2" connection for FILLHOSE-2, but it is available for installations using the smaller 1-1/2" hose system.
View 1-1/2" Chrome Gas Deck FillHow a Marine Fuel Fill System Works
The fuel-fill system provides the path from the deck-mounted fuel cap to the boat's permanent fuel tank.
During refueling:
- Fuel enters through the deck fill.
- The fuel travels through the large-diameter fill hose.
- The hose delivers the fuel to the tank's fill connection.
- The tank's separate vent system allows displaced air to escape.
The deck fill, fuel fill hose, tank connection and vent system all need to be correctly sized and routed for reliable filling.
Fuel Fill Hose Installation Tips
- Verify the deck-fill and tank-fill connection size before ordering hose.
- Use hose specifically rated for marine fuel-fill service.
- Make sure the hose fully seats over each hose barb or fitting.
- Use properly sized corrosion-resistant clamps.
- Avoid tight bends and kinks that can restrict fuel flow.
- Plan the routing before cutting the hose.
- Keep the hose away from sharp edges and moving parts.
- Do not allow batteries or stored equipment to crush the hose.
- Check both ends for leaks or seepage after installation.
A 2" fuel fill hose requires compatible 2" fittings.
If the deck fill or fuel-tank fill neck is 1-1/2", use the corresponding 1-1/2" hose instead of trying to force or adapt the wrong hose size.
Why Fuel Fill Hose is So Heavy Duty
Fuel fill hose is much larger and more heavily constructed than the smaller fuel hose used to feed an engine.
It has to handle:
- Large volumes of fuel during refueling
- Marine vibration and movement
- Fuel exposure
- Heat and environmental exposure
- The bends required between the deck fill and fuel tank
Because of its construction, fuel fill hose can be relatively stiff. Planning the routing before installation is especially important.
When Should Fuel Fill Hose Be Replaced?
Inspect the fill hose whenever the deck fill, fuel tank or surrounding rigging is serviced.
Replace the hose if you find:
- Cracks in the outer surface
- Hard, dry or brittle rubber
- Soft or swollen areas
- Abrasion or chafe damage
- Fuel seepage
- Persistent gasoline odor near the hose
- Loose, damaged or corroded clamps
- A hose that no longer fits tightly on the fittings
Key Features and Benefits
- 2" marine fuel fill hose
- Type A2 construction
- Designed for deck-fill to fuel-tank plumbing
- Large-diameter marine fuel-system application
- Matching 4-9 German-style clamp available
- 1-1/2" Type A2 fuel fill hose also available
- Suitable for replacement and new fuel-system installations
- Helps provide a dedicated path from the deck fill to the fuel tank
FAQ
What size is FILLHOSE-2?
FILLHOSE-2 is 2" inside-diameter marine fuel fill hose.
What is FILLHOSE-2 used for?
It is used to connect a compatible deck-mounted fuel fill to the fill
connection on a permanent marine fuel tank.
Is this a Type A2 hose?
Yes. FILLHOSE-2 is a Type A2 marine fuel fill hose.
Can I use this as the fuel-supply line to the engine?
This product is intended as large-diameter fuel fill hose. Use the correct
marine fuel-supply hose for the tank-to-engine fuel line.
Which clamp fits this hose?
Pro Marine pairs FILLHOSE-2 with the
4-9 German-Style Hose Clamp
.
Do you have a smaller fuel fill hose?
Yes. Pro Marine also stocks
FILLHOSE-112 1-1/2" Type A2 Fuel Fill Hose
.
How do I know whether I need 1-1/2" or 2" hose?
Verify the hose-barb diameter on both the deck fill and the fuel tank.
The hose size needs to match the fittings used in the boat.
Why is fuel fill hose so stiff?
Marine fuel fill hose is heavily constructed for its application, which
makes it less flexible than smaller engine fuel hose. Plan bends and hose
routing before installation.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
FILLHOSE-2, 2 inch fuel fill hose, Type A2 fuel hose, marine fuel fill hose, boat gas fill hose, deck fill hose, fuel tank fill hose, marine gas tank hose, rigid fuel fill hose, 4-9 hose clamp, FILLHOSE-112, 1-1/2 fuel fill hose, boat fuel hose, marine fuel tank plumbing
821709T
Transparent Tygon Bleed Hose
1/8" Tygon Bleed Hose - 10ft Length
Pro Marine Item 259 is transparent 1/8" Tygon bleed hose supplied in a 10-foot length. It is used in compatible marine and PWC applications requiring small-diameter bleed line.
The transparent construction makes it easy to visually inspect fluid inside the hose, which is especially useful when servicing bleed, oil-related or other small fluid-line circuits.
Pro Marine also stocks several other Tygon hose sizes for fuel, oil-injection and bleed-line applications. Use the size chart below to compare the available options.
Inside Diameter: 1/8"
Length: 10 Feet
Material: Tygon
Color: Transparent
Application: Bleed / Small Fluid Line
Item Number: 259
What This Tygon Bleed Hose is Used For
Item 259 is intended for small-diameter marine applications requiring 1/8" transparent Tygon bleed hose.
Small bleed lines can become brittle, cracked, loose or damaged over time. Replacing deteriorated tubing helps maintain proper fluid routing and system operation.
Always verify the required inside diameter and application before replacing an existing hose.
Why Use Transparent Bleed Hose?
Transparent hose allows the line and the fluid inside it to be visually inspected during service.
Depending on the system, this can make it easier to identify:
- Whether fluid is present in the line
- Air pockets
- Visible contamination
- Flow interruptions
- Hose discoloration or deterioration
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent PWC Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC / MerCruiser pump-to-carb Tygon fuel hose | View 257 |
| 258 | 5/16" | 10 ft | PWC / Outboard transparent Tygon fuel hose | View 258 |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | Current Product |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for oil-injection applications.
View 3/32" Tygon Hose
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.
View 3/16" Tygon Fuel Hose
1/4" Tygon Fuel Hose - 257
Transparent 1/4" Tygon fuel hose for compatible PWC and MerCruiser pump-to-carb applications.
View 1/4" Tygon Fuel Hose
5/16" Tygon Fuel Hose - 258
Transparent 5/16" Tygon fuel hose for compatible PWC and outboard fuel-system applications.
View 5/16" Tygon Fuel HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for marine hose applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included.
View Oetiker Clamp PackChoosing the Correct Bleed Hose Size
Bleed hose should be matched to the exact fitting and fluid-line application. Item 259 has a 1/8" inside diameter.
Do not substitute another hose size simply because it appears close. A proper fit at each connection is important for preventing leaks and maintaining reliable fluid flow.
When Should Bleed Hose Be Replaced?
Small-diameter hose should be inspected during normal system service. Replacement should be considered if the hose shows:
- Cracking or splitting
- Hardening or brittleness
- Fluid leakage
- Loose connections at fittings
- Visible contamination or deterioration
- Abrasion or routing damage
Key Features and Benefits
- 1/8" inside diameter
- 10-foot length
- Transparent Tygon bleed hose
- Suitable for compatible marine and PWC bleed-line applications
- Transparent construction allows visual inspection of fluid in the line
- Additional Tygon fuel-hose sizes available
- Small oil-injection hose option available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Hose?
Hose diameter, hose construction, application and clamp selection should all match the system being serviced.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 259?
Item 259 is 1/8" ID Tygon bleed hose.
How much hose is included?
Item 259 is supplied in a 10-foot length.
Is this hose transparent?
Yes. The transparent construction allows visual inspection of fluid
inside the hose.
Is this a main fuel-supply hose?
No. Item 259 is listed as a bleed hose, not as the
larger main fuel-feed hose used between a tank and engine.
Is this sold by the foot?
No. Item 259 is supplied as a 10-foot length.
Do you carry 3/32" Tygon hose?
Yes. Pro Marine stocks
item 255 3/32" Tygon hose
.
Do you carry larger Tygon fuel hose?
Yes. Pro Marine stocks
3/16",
1/4"
and
5/16"
Tygon fuel hose.
Do you sell an Oetiker clamp installation tool?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible ear-clamp applications.
Do you sell a clamp assortment?
Yes. The
Pro Marine Oetiker Clamp Pack with Tool
includes commonly used clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
259, Tygon 259, 1/8 Tygon hose, 1/8 bleed hose, Tygon bleed hose, marine bleed hose, PWC bleed hose, small fluid hose, transparent bleed line, transparent Tygon tubing, oil bleed hose, marine bleed line, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose
Transparent Tygon Fuel Hose
5/16" Tygon Fuel Hose - 10ft Length
Pro Marine Item 258 is transparent 5/16" Tygon fuel hose supplied in a 10-foot length. It is used in compatible PWC and outboard fuel-system applications requiring 5/16" inside-diameter hose.
The transparent construction allows technicians to visually inspect fuel inside the line during installation, troubleshooting and routine fuel-system service.
Pro Marine stocks several Tygon hose sizes for fuel, oil-injection and bleed-line applications. Use the size chart below to compare all of the available options.
Inside Diameter: 5/16"
Length: 10 Feet
Material: Tygon
Color: Transparent
Applications: PWC / Outboard Fuel Systems
Item Number: 258
Compatible Applications
Item 258 is intended for fuel-system applications requiring 5/16" transparent Tygon fuel hose.
- PWC fuel systems requiring 5/16" ID hose
- Outboard fuel-system applications requiring 5/16" ID hose
- Other compatible small fuel circuits requiring this hose size and material
Always verify the required inside diameter and hose application before replacing an existing fuel line.
Why Use Transparent Tygon Fuel Hose?
Transparent hose makes it easier to visually inspect what is happening inside the fuel line.
Depending on the system, this can help identify:
- Whether fuel is present in the line
- Obvious air pockets
- Fuel-flow interruptions
- Visible contamination
- Hose discoloration or deterioration
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent PWC Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC / MerCruiser pump-to-carb Tygon fuel hose | View 257 |
| 258 | 5/16" | 10 ft | PWC / Outboard transparent Tygon fuel hose | Current Product |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | View 259 |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for PWC oil-injection applications. Supplied in a 10-foot length.
View 3/32" Tygon Hose
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.
View 3/16" Tygon Fuel Hose
1/4" Tygon Fuel Hose - 257
Transparent 1/4" Tygon fuel hose for compatible PWC and MerCruiser pump-to-carburetor applications.
View 1/4" Tygon Fuel Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.
View 1/8" Tygon Bleed HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for marine hose applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. Ideal for marine technicians servicing multiple hose sizes.
View Oetiker Clamp PackChoosing the Correct Tygon Hose Size
Tygon hose should be matched to the fitting and fuel-system application. Item 258 has a 5/16" inside diameter.
Verify the original hose size before installation. Do not substitute 1/4", 3/16" or another hose diameter simply because the connection appears similar.
When Should Tygon Fuel Hose Be Replaced?
Inspect fuel hose during routine fuel-system service and replace it when deterioration is found.
Common reasons for replacement include:
- Cracks or splits
- Hardening or brittleness
- Fuel leakage
- Loose connections at fittings
- Severe discoloration or deterioration
- Abrasion or routing damage
Key Features and Benefits
- 5/16" inside diameter
- 10-foot length
- Transparent Tygon fuel hose
- Useful for compatible PWC fuel-system applications
- Useful for compatible outboard fuel-system applications
- Transparent construction allows visual inspection of the fuel line
- Additional Tygon fuel-hose sizes available
- Oil-injection and bleed-hose options available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Fuel Hose?
Hose diameter, hose construction, application and clamp selection all need to match the system being serviced.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 258?
Item 258 is 5/16" ID Tygon fuel hose.
How much hose is included?
Item 258 is supplied in a 10-foot length.
Is this hose transparent?
Yes. The transparent construction allows visual inspection of fuel
inside the line.
Does this hose fit PWC applications?
Yes. Item 258 is used in compatible PWC fuel systems requiring
5/16" Tygon hose.
Can this hose be used in outboard fuel systems?
Yes. It is also suitable for compatible outboard applications requiring
5/16" Tygon fuel hose.
Is this hose sold by the foot?
No. Item 258 is supplied as a 10-foot length.
Do you carry smaller Tygon fuel hose?
Yes. Pro Marine stocks
3/16" Tygon fuel hose
and
1/4" Tygon fuel hose
.
Do you carry oil-injection hose?
Yes. Pro Marine stocks
item 255 3/32" Tygon hose
for small oil-injection line applications.
Do you carry Tygon bleed hose?
Yes. Pro Marine stocks
item 259 1/8" Tygon bleed hose
.
Do you sell an Oetiker clamp installation tool?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible Oetiker ear-clamp applications.
Do you sell a complete clamp assortment?
Yes. The
Pro Marine Oetiker Clamp Pack with Tool
includes common clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
258, Tygon 258, 5/16 Tygon hose, 5/16 Tygon fuel hose, 5/16 fuel line, PWC fuel hose, PWC fuel line, outboard fuel hose, outboard fuel line, transparent fuel hose, transparent fuel line, Tygon fuel hose, Tygon hose 10ft, marine fuel hose, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 259, 1/8 Tygon bleed hose
Transparent Tygon Fuel Hose
1/4" Tygon Fuel Hose - 10ft Length
Pro Marine Item 257 is transparent 1/4" Tygon fuel hose supplied in a 10-foot length. It is used in compatible PWC fuel systems and in MerCruiser fuel-pump-to-carburetor applications requiring 1/4" inside-diameter hose.
The transparent construction allows visual inspection of fuel inside the hose, making it useful when diagnosing or servicing small fuel-system circuits.
Pro Marine stocks multiple Tygon hose sizes for fuel, oil-injection and bleed-line applications. Compare all available sizes in the chart below.
Inside Diameter: 1/4"
Length: 10 Feet
Material: Tygon
Color: Transparent
Applications: PWC Fuel Systems / MerCruiser Pump-to-Carb Fuel Line
Item Number: 257
Compatible Applications
Item 257 is intended for fuel-system applications requiring 1/4" transparent Tygon fuel hose.
- PWC fuel-line applications requiring 1/4" ID hose
- MerCruiser fuel-pump-to-carburetor hose applications requiring 1/4" ID line
- Other compatible small fuel-system circuits requiring this hose size and material
Always verify the required hose size and application before replacing an existing fuel line.
MerCruiser Pump-to-Carb Fuel Hose
Item 257 is also useful for compatible MerCruiser pump-to-carburetor fuel-line applications requiring 1/4" hose.
This section of the fuel system carries fuel from the fuel pump toward the carburetor. Verify the original hose diameter and fuel-system configuration before installation.
Why Use Transparent Tygon Fuel Hose?
Transparent fuel hose makes it possible to visually inspect the fuel inside the line during service.
Depending on the application, this can help identify:
- Whether fuel is present in the line
- Obvious air pockets
- Fuel-flow interruptions
- Visible contamination
- Line deterioration or discoloration
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent PWC Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC / MerCruiser pump-to-carb Tygon fuel hose | Current Product |
| 258 | 5/16" | 10 ft | Transparent PWC and outboard Tygon fuel hose | View 258 |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | View 259 |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for PWC oil-injection applications. Supplied in a 10-foot length.
View 3/32" Tygon Hose
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.
View 3/16" Tygon Fuel Hose
5/16" Tygon Fuel Hose - 258
Transparent 5/16" Tygon fuel hose for compatible PWC and outboard fuel-system applications.
View 5/16" Tygon Fuel Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.
View 1/8" Tygon Bleed HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker clamp installation tools and a complete clamp assortment for marine fuel-line applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. Ideal for marine technicians servicing multiple hose sizes.
View Oetiker Clamp PackChoosing the Correct Tygon Hose Size
Tygon hose should be matched to the fitting and fuel-system application. Item 257 has a 1/4" inside diameter.
Do not substitute a 3/16" or 5/16" hose simply because the fitting appears close in size. The hose must fit the fuel-system connection properly and match the original application.
When Should Tygon Fuel Hose Be Replaced?
Inspect small fuel lines during normal fuel-system maintenance. Replace hose that shows signs such as:
- Cracks or splitting
- Hardening or brittleness
- Fuel leakage
- Loose hose-to-fitting connections
- Severe discoloration or deterioration
- Abrasion or routing damage
Key Features and Benefits
- 1/4" inside diameter
- 10-foot length
- Transparent Tygon fuel hose
- Fits compatible PWC fuel-system applications
- Fits compatible MerCruiser pump-to-carburetor applications
- Transparent construction allows visual inspection of fuel flow
- Additional Tygon fuel-hose sizes available
- Oil-injection and bleed-hose options also available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Fuel Hose?
Hose diameter, hose construction, application and clamp selection all matter when servicing marine fuel systems.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 257?
Item 257 is 1/4" ID Tygon fuel hose.
How much hose is included?
The hose is supplied in a 10-foot length.
Is this hose transparent?
Yes. Its transparent construction allows visual inspection of fuel
inside the hose.
Does this hose fit PWC applications?
Yes. Item 257 is used in compatible PWC fuel systems requiring
1/4" Tygon hose.
Can this be used on MerCruiser engines?
Yes. Item 257 is listed for compatible
MerCruiser fuel-pump-to-carburetor applications
requiring 1/4" hose.
Is this sold by the foot?
No. Item 257 is supplied as a 10-foot length.
Do you carry a smaller Tygon fuel hose?
Yes. Pro Marine stocks
3/16" Tygon fuel hose
.
Do you carry a larger Tygon fuel hose?
Yes. Pro Marine stocks
5/16" Tygon fuel hose
.
Do you sell oil-injection and bleed hose?
Yes. Pro Marine also stocks
3/32" Tygon oil-injection hose
and
1/8" Tygon bleed hose
.
Do you sell Oetiker clamp tools?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible Oetiker ear-clamp installations.
Do you sell a complete clamp assortment?
Yes. The
Pro Marine Oetiker Clamp Pack with Tool
includes common clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
257, Tygon 257, 1/4 Tygon hose, 1/4 Tygon fuel hose, 1/4 fuel line, PWC fuel hose, PWC fuel line, MerCruiser fuel hose, MerCruiser pump to carb hose, pump to carb fuel line, carburetor fuel hose, transparent fuel hose, transparent fuel line, Tygon fuel hose 10ft, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose
7381563
7381567