S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Suzuki Outboard Parts
Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.
Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Suzuki Outboard Parts by System
- Control Cables & Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Transom & Midsection
- Trim System
Find the Correct Suzuki Outboard Part
Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Suzuki Outboard Engine Families
Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.
- Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
- Inline Four-Cylinder: common DF70 through DF140 engine families
- Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
- High-Horsepower Offshore: DF300, DF325, and DF350 platforms
- FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications
Common Suzuki Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
- Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
- Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Suzuki Outboard Parts from Pro Marine USA?
- OEM Suzuki and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Suzuki outboard part?
Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.
Can I search Suzuki parts by OEM part number?
Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Suzuki outboard parts vary by model and year?
Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.
Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?
Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Suzuki parts?
Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.
What Suzuki outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Pro Series Hydraulic Steering System
Pro Marine 700HSTEER Hydraulic Steering System
The Pro Marine 700HSTEER Hydraulic Steering System is a Pro Series aftermarket hydraulic steering kit designed for high-performance marine outboard steering applications.
This Pro Marine hydraulic steering system is listed as a complete kit and is designed to provide smooth, controlled steering response for demanding boat setups.
What a Pro Series Hydraulic Steering System Does
A hydraulic steering system uses a helm pump, hydraulic fluid, steering hoses, fittings, and a steering cylinder to turn the outboard engine. When the steering wheel is turned, hydraulic pressure moves fluid through the system and operates the cylinder at the engine.
The 700HSTEER Pro Series system is built for applications where stronger steering control, smooth handling, and reliable hydraulic response are important.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| High-Performance Outboards | Pro Series hydraulic steering applications |
| Offshore Boats | Controlled hydraulic steering for demanding water conditions |
| Performance Setups | Responsive steering control for higher-speed operation |
| Repower Projects | Upgrade from cable steering or older hydraulic steering systems |
| Marine Repair Shops | Professional hydraulic steering replacement and installation work |
Complete or Service Your Steering System
Hydraulic Hoses
Choose the correct hydraulic steering hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesHydraulic Fluid
Use quality hydraulic steering fluid when filling and bleeding your hydraulic steering system.
View PRO-OIL15 Hydraulic FluidPro Series End Cap Kit
Service the 700-HSTEER-CYL steering cylinder with the correct replacement end cap kit.
View 700-ENDCAPHydraulic Steering Fittings
Use compatible Pro Marine hydraulic steering fittings when servicing or completing the steering system.
View HLO14BOS 90° FittingKey Features and Benefits
- Pro Series hydraulic steering system
- Listed as a complete aftermarket steering kit
- Designed for demanding marine outboard steering applications
- Helps provide smooth, controlled hydraulic steering response
- Good choice for performance boats, offshore boats, and repowers
- Helps reduce steering effort compared to cable steering
- Compatible service parts available from Pro Marine
- Oversized shipping item
System Function and Connections
- System Type: Pro Series hydraulic outboard steering
- Component Type: Complete hydraulic steering kit
- Part Number: 700HSTEER
- OEM or Aftermarket: Aftermarket
- Manufacturer: Pro Marine
- Connection Type: Hydraulic steering hose circuit
- Typical Use: High-performance marine outboard steering systems
- Related Components: Hydraulic hoses, steering fluid, fittings, cylinder service parts, and bleed tools
FAQ
What is the Pro Marine 700HSTEER system?
It is a Pro Series aftermarket hydraulic steering system listed as a complete kit for marine steering applications.
What type of steering system is this?
This is a hydraulic outboard steering system designed to use hydraulic pressure to operate the steering cylinder.
Is this an OEM or aftermarket steering system?
This product is listed as an aftermarket Pro Marine hydraulic steering system.
What parts are commonly serviced with this system?
Common related service parts include hydraulic hoses, steering fluid, fittings, bleed tools, and the 700-ENDCAP cylinder end cap kit.
Is this item oversized?
Yes. The product page lists this steering system as an oversized shipping item.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
700HSTEER, Pro Marine 700HSTEER, Pro Series hydraulic steering, hydraulic steering system, complete hydraulic steering kit, aftermarket steering system, outboard hydraulic steering, performance boat steering, offshore hydraulic steering, Pro Marine steering kit