Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Suzuki Outboard Parts

Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.

Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Suzuki Outboard Parts by System

Find the Correct Suzuki Outboard Part

Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Suzuki Outboard Engine Families

Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.

  • Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
  • Inline Four-Cylinder: common DF70 through DF140 engine families
  • Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
  • High-Horsepower Offshore: DF300, DF325, and DF350 platforms
  • FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications

Common Suzuki Outboard Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
  • Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
  • Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Suzuki Outboard Parts from Pro Marine USA?

  • OEM Suzuki and aftermarket replacement options for many common applications.
  • Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Suzuki outboard part?

Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.

Can I search Suzuki parts by OEM part number?

Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Suzuki outboard parts vary by model and year?

Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.

Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?

Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.

Do you carry both OEM and aftermarket Suzuki parts?

Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.

What Suzuki outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 469 - 480 of 1065 ▶ ▶|
View:
Bore Size 2.658
Item#:
2658KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 2.785
Item#:
2785KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
37.00
Each
Bore Size 3.312
Item#:
3312KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 3.494
Item#:
3494KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.559"
Item#:
2559CD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
30cc Tilt Hydraulic Steering Helm Pump for Pro Marine, SeaStar & Uflex Styl

30cc Tilt Hydraulic Steering Helm Pump

Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump

The Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump is a 30cc tilt hydraulic steering helm designed for smooth, responsive steering control while allowing adjustable steering wheel positioning for improved driver comfort.

This Pro Marine tilt helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.

What a 30cc Tilt Helm Pump Does

The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.

A 30cc tilt helm moves more fluid per steering wheel turn than smaller helms while also allowing the steering wheel angle to be adjusted for improved comfort and driving position.

Pro Tip: Tilt helms are popular on center consoles, bay boats, and performance boats where the driver wants adjustable steering wheel positioning for standing or seated operation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Single Outboards up to 350HP Hydraulic steering helm applications requiring adjustable tilt positioning
Center Console Boats Improved comfort for seated and standing driving positions
Bay Boats Responsive steering with adjustable helm angle
Offshore Boats Comfortable steering position for long-distance operation
Performance Setups Useful where responsive steering and driver comfort are important

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Steering Cylinder

Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.

View 350-HSTEER-CYL Cylinder

Hydraulic Hoses

Choose the correct hose length for your boat, jack plate, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

Fluid & Fill Accessories

Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.

View PRO-OIL15 Hydraulic Fluid
View 102P Fill Hose Assembly

Key Features and Benefits

  • 30cc tilt hydraulic helm pump design
  • 1.83 cubic inches per revolution hydraulic displacement
  • Adjustable tilt steering position for improved comfort
  • Can provide quicker steering response when properly matched
  • Designed for the Pro Marine 350-HSTEER hydraulic steering system
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Good choice for center consoles and performance boats
  • Helps reduce steering effort compared to cable steering

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Tilt hydraulic helm pump
  • Helm Size: 30cc
  • Displacement: 1.83 cu in/rev
  • Connection Type: Hydraulic steering hose circuit
  • Tilt Feature: Adjustable steering wheel angle
  • Typical Use: Single outboard hydraulic steering systems
  • Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
  • Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit

FAQ

What does a tilt hydraulic helm do?
A tilt helm allows the steering wheel angle to be adjusted while also providing hydraulic steering control for the outboard engine.

What is the advantage of a tilt helm?
Tilt helms improve driver comfort by allowing the wheel position to be adjusted for seated or standing operation.

What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.

Is this the complete steering system?
No. This listing is for the tilt helm pump only.

Can this helm be used on center console boats?
Yes. Tilt helms are especially popular on center console boats where adjustable steering wheel positioning improves comfort and visibility.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-THELM-030, tilt hydraulic helm pump, 30cc tilt helm, Pro Marine tilt helm, 1.83 cu in helm pump, SeaStar compatible tilt helm, Uflex compatible tilt helm, hydraulic steering tilt helm, adjustable tilt steering helm, outboard steering helm, 350-HSTEER tilt helm

Item#:
350-THELM-030
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
877.20
Each
Bore Size 3.685
Item#:
3685KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
52.95
Each
Bore Size 2.786
Item#:
2786CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 2.618
Item#:
2618CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.268
Item#:
3268KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.605
Item#:
2605KD
Manufacturer:
Wiseco
Available:
Special Order
Your Price:
39.63
Each
Bore Size 2.595
Item#:
2595KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
|◀ ◀ 469 - 480 of 1065 ▶ ▶|
View: