Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Suzuki Outboard Parts

Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.

Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Suzuki Outboard Parts by System

Find the Correct Suzuki Outboard Part

Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Suzuki Outboard Engine Families

Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.

  • Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
  • Inline Four-Cylinder: common DF70 through DF140 engine families
  • Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
  • High-Horsepower Offshore: DF300, DF325, and DF350 platforms
  • FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications

Common Suzuki Outboard Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
  • Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
  • Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Suzuki Outboard Parts from Pro Marine USA?

  • OEM Suzuki and aftermarket replacement options for many common applications.
  • Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Suzuki outboard part?

Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.

Can I search Suzuki parts by OEM part number?

Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Suzuki outboard parts vary by model and year?

Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.

Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?

Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.

Do you carry both OEM and aftermarket Suzuki parts?

Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.

What Suzuki outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 481 - 492 of 1065 ▶ ▶|
View:
Bore Size 3.268
Item#:
3268TD
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
54.95
Each
For Twin 350-Hsteer cylinders
Item#:
350-TIEBAR-D
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
296.49
Each
Bore Size 2.894
Item#:
2894CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 2.913
Item#:
2913CD
Manufacturer:
Wiseco
Available:
In Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.385
Item#:
3385KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.913
Item#:
2913KD
Manufacturer:
Wiseco
Available:
Out of Stock
51.2700
Your Price:
49.95
Each
Tilt Helm Hydraulic Steering System for Outboards up to 350HP

Hydraulic Steering System with Tilt Helm

Pro Marine 350-TSTEER Hydraulic Steering System

The Pro Marine 350-TSTEER Hydraulic Steering System is a complete hydraulic steering package with an all-new tilt helm for smooth, responsive steering control on high-horsepower outboard boats.

This universal Pro Marine hydraulic steering system is designed for outboard applications up to 350HP. It includes the main steering components needed for installation, but does not include hydraulic hoses.

What a Hydraulic Steering System with Tilt Helm Does

A hydraulic steering system uses a helm pump, hydraulic fluid, hoses, and a steering cylinder to turn the outboard engine. When the steering wheel is turned, the helm moves fluid through the system and operates the cylinder mounted at the engine.

The tilt helm allows the steering wheel angle to be adjusted for driver comfort while maintaining smooth hydraulic steering response. This is especially helpful on center consoles, bay boats, and performance boats where the operator may switch between seated and standing driving positions.

Pro Tip: This kit does not include hydraulic hoses. Measure your boat carefully before ordering hoses, allowing for the steering route, rigging path, jack plate, engine movement, and any additional setback.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Single Outboards up to 350HP Complete hydraulic steering installation with tilt helm comfort
Center Console Boats Adjustable steering wheel angle for seated or standing operation
Bay Boats Smooth steering control for shallow-water and open-water use
Bass Boats Responsive steering feel and reduced steering effort
Repower Projects Upgrade from cable steering to hydraulic steering

Complete or Service Your Steering System

Hydraulic Hoses

This steering system does not include hoses. Choose the correct hose length for your boat, jack plate, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

Hydraulic Fluid

Use quality hydraulic steering fluid when filling and bleeding your hydraulic steering system.

View PRO-OIL15 Hydraulic Fluid

Fill Hose Assembly

A fill hose assembly helps simplify hydraulic steering system filling and bleeding during installation.

View 102P Fill Hose Assembly

Bleed Kit

Bleed kits help remove trapped air from hydraulic steering cylinders and hoses during service or installation.

View 350-BLEEDKIT

Key Features and Benefits

  • Complete hydraulic steering system with tilt helm
  • Universal outboard steering application
  • Designed for single outboards up to 350HP
  • All-new tilt helm for adjustable steering wheel position
  • Helps reduce steering effort compared to cable steering
  • Improves steering response and handling control
  • Good choice for center consoles, bay boats, bass boats, and repowers
  • Does not include hydraulic steering hoses

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Complete hydraulic steering system with tilt helm
  • Part Number: 350-TSTEER
  • Application: Universal outboard hydraulic steering
  • Horsepower Rating: Single outboards up to 350HP
  • Connection Type: Hydraulic steering hose circuit
  • Included Components: Steering cylinder, tilt helm, hydraulic fluid, and fill hose assembly
  • Not Included: Hydraulic steering hoses
  • Related Components: Hydraulic hoses, steering fluid, bleed kit, fittings, and steering wheel

FAQ

What is included with the 350-TSTEER hydraulic steering system?
This kit includes the main hydraulic steering system components, including the steering cylinder, tilt helm, hydraulic fluid, and fill hose assembly.

Does this kit include hydraulic steering hoses?
No. The 350-TSTEER hydraulic steering system does not include hoses. Hydraulic hoses must be selected separately based on your boat layout and required hose length.

What is the advantage of a tilt helm?
A tilt helm allows the steering wheel angle to be adjusted for improved comfort, visibility, and driving position.

What outboards can this steering system be used with?
This system is designed for universal single outboard hydraulic steering applications up to 350HP.

Can this replace cable steering?
Yes. This hydraulic steering system is commonly used to upgrade boats from traditional cable steering to smoother hydraulic steering.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-TSTEER, hydraulic steering system with tilt helm, Pro Marine tilt helm steering kit, outboard hydraulic steering kit, universal hydraulic steering system, 350HP steering system, hydraulic steering without hoses, SeaStar style steering kit, Uflex style steering kit, Pro Marine hydraulic steering

Item#:
350-TSTEER
Manufacturer:
Pro Marine
Available:
In Stock
 
Oversized Shipping
Your Price:
1460.00
Each
Bore Size 3.012
Item#:
3012TD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
54.95
Each
Bore Size 3.012
Item#:
3012TC
Manufacturer:
Wiseco
Available:
Out of Stock
26.7600
Your Price:
24.95
Each
Bore Size 2.975
Item#:
2975KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 2.677
Item#:
2677CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Mercury 2L Bore Size 3.145
Item#:
3145KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
51.27
Each
|◀ ◀ 481 - 492 of 1065 ▶ ▶|
View: