881170A13P Mercury 14-Pin Side Mount Remote Control

The Pro Marine 881170A13P Side Mount Remote Control is an aftermarket replacement control for compatible Mercury mechanical rigging systems using a 14-pin electrical connection and Gen 1-style control cables.

This side-mount control is configured with a 15-foot harness and cross-references Mercury control numbers 8M0178536, 8M0178537, 881170A13, and 881170A14.

Product Information

• Pro Marine Part Number: 881170A13P
• Brand: Pro Marine
• Part Type: Side Mount Remote Control
• Application: Compatible Mercury Mechanical-Control Rigging
• Electrical Connection: 14-Pin
• Control Cable Type: Gen 1 Style
• Harness Length: 15 Feet
• Mounting Style: Side Mount

Important Fitment Note

Mercury remote controls should not be selected by engine horsepower alone. The rigging configuration is the important factor when identifying the correct replacement control.

Pro Marine 881170A13P is specifically for compatible Mercury installations requiring a 14-pin electrical connection, Gen 1-style mechanical control cables, and a 15-foot harness.

Before ordering, verify the connector style, control-cable generation, harness requirement, mounting style, and original control part number. A similar-looking Mercury control may use different cables or electrical connections.

OEM and Cross Reference Numbers

Pro Marine 881170A13P cross-references the following Mercury remote-control numbers for compatible applications.

What This Control is Used For

This side-mount remote control provides the helm controls for mechanical throttle and shift operation on compatible Mercury rigging systems.

Unlike a binnacle control that mounts on top of a console, a side-mount control is installed against the side surface of the helm or control area. This makes the mounting style an important part of identifying the correct replacement.

Pro Marine 881170A13P is intended for applications already configured for the corresponding Mercury 14-pin electrical system, Gen 1-style mechanical cables, and 15-foot harness arrangement.

Mercury Rigging Fitment

Fitment for 881170A13P is best identified by the control and rigging configuration rather than by a broad engine horsepower or year range.

Gen 1 Cable Fitment is Important

Mercury mechanical control systems have used different control-cable configurations. This particular control is listed for Gen 1-style control cables.

Do not assume a control designed for Gen 2 cables is interchangeable simply because the electrical connector or mounting style appears similar. Verify the cable ends and original rigging configuration before replacing the control.

What to Check Before Ordering

• Side Mount: Confirm your existing control uses the correct side-mount configuration.
• 14-Pin Connector: Verify the electrical connection matches the Mercury 14-pin configuration.
• Gen 1 Cables: Confirm the throttle and shift cables use the compatible Gen 1-style connection.
• 15-Foot Harness: Verify the harness length and routing are appropriate for the installation.
• Original Part Number: Compare the original control number with 8M0178536, 8M0178537, 881170A13, or 881170A14 whenever possible.

Common Replacement Reasons

• Original side-mount control is worn or physically damaged.
• Control lever operation has become loose, difficult, or unreliable.
• Throttle or shift operation is no longer functioning correctly.
• Control housing or internal mechanism has been damaged.
• Existing control is being replaced during a helm or rigging restoration.
• An older matching Mercury control number is being replaced.

Difficult throttle or shift operation can also be caused by worn, corroded, incorrectly adjusted, or binding control cables. Inspect the entire control and cable system before replacing components.

Installation Tips

• Disconnect battery power before servicing the control or engine electrical system.
• Verify the 14-pin connector before removing or modifying existing rigging.
• Confirm both throttle and shift cables use the required Gen 1-style connections.
• Inspect the existing control cables for corrosion, stiffness, kinks, or excessive wear.
• Verify that the 15-foot harness can be routed correctly without tension or sharp bends.
• Compare the new control with the original before modifying mounting surfaces.
• Route control cables with smooth bends to prevent binding or excessive control effort.
• After installation, verify neutral, shift direction, throttle travel, and overall control operation before operating the boat.

Because the remote control directly affects throttle and shift operation, installation and adjustment should be performed by a qualified marine technician when the installer is not familiar with Mercury mechanical rigging systems.

Key Features and Benefits

• Pro Marine Brand: Aftermarket replacement for compatible Mercury applications.
• Side Mount Design: Designed for compatible side-mounted helm installations.
• Mercury 14-Pin: For compatible Mercury 14-pin electrical systems.
• Gen 1 Cable Application: Designed for Gen 1-style mechanical control cables.
• 15-Foot Harness: Configured with the specified 15-foot harness.
• Mechanical Throttle and Shift: For compatible cable-operated Mercury rigging.
• Multiple OEM References: Cross-references 8M0178536, 8M0178537, 881170A13, and 881170A14.

Frequently Asked Questions

What is Pro Marine 881170A13P?

881170A13P is a Pro Marine aftermarket side-mount remote control for compatible Mercury mechanical-control systems.

What electrical connector does this control use?

It is listed for a Mercury 14-pin electrical connection.

Does 881170A13P use Gen 1 or Gen 2 control cables?

This control is specifically listed for Gen 1-style mechanical control cables.

How long is the harness?

The specified harness length is 15 feet.

Is this a side-mount or top-mount control?

This is a side-mount remote control. It should not be confused with a binnacle / top-mount console control.

Does it replace Mercury 881170A13?

Yes. 881170A13 is one of the supplied Mercury cross-reference numbers for Pro Marine 881170A13P.

Does it replace Mercury 881170A14?

Yes. 881170A14 is also included in the supplied cross-reference list.

What about Mercury 8M0178536 and 8M0178537?

Both 8M0178536 and 8M0178537 are included among the supplied OEM cross references for this control.

Will this work with Gen 2 control cables?

Do not assume compatibility. This control is specifically identified for a Gen 1 cable application. A Gen 2 installation requires the appropriate Gen 2-compatible control or rigging components.

Will this fit any Mercury engine with a 14-pin harness?

No. The 14-pin connection is only one part of the fitment. The installation must also use the compatible Gen 1-style mechanical cables, side-mount configuration, and appropriate harness arrangement.

Is this a digital throttle and shift control?

No. This application uses mechanical throttle and shift control cables.

Searchable Part Numbers

881170A13P, 881170A13, 881170A14, 8M0178536, 8M0178537, 881170 A13, 881170 A14, 8M 0178536, 8M 0178537

Searchable Terms

Mercury side mount control, Mercury side mount remote control, Mercury 14 pin control, Mercury 14-pin remote control, Mercury Gen 1 control, Mercury Gen 1 cable control, Mercury 15 foot harness control, Mercury mechanical remote control, Mercury throttle control, Mercury shift control, Mercury throttle and shift control, Mercury remote control box, 881170A13 replacement, 881170A14 replacement, 8M0178536 replacement, 8M0178537 replacement, Pro Marine 881170A13P