881170A15P Mercury 8-Pin Side Mount Remote Control

The Pro Marine 881170A15P Side Mount Control is an aftermarket remote-control assembly for compatible Mercury mechanical rigging systems using an 8-pin electrical connection.

This control uses Gen 1-style mechanical control cables, includes a 15-foot harness, and is configured for compatible Mercury applications using handle-mounted power trim and tilt.

Product Information

• Pro Marine Part Number: 881170A15P
• Brand: Pro Marine
• Part Type: Side Mount Remote Control
• Electrical Connection: Mercury 8-Pin
• Control Cable Type: Gen 1 Style
• Harness Length: 15 Feet
• Trim Function: Power Trim and Tilt Control
• Mounting Style: Side Mount
• OEM Version Available: Mercury 881170A15

Important Fitment Note

Do not select this control by Mercury engine horsepower alone. Fitment is determined by the boat's rigging configuration.

This control is specifically for compatible installations requiring a Mercury 8-pin electrical connection, Gen 1-style mechanical throttle and shift cables, and a 15-foot harness.

A similar-looking Mercury control may use a 14-pin connector, Gen 2 control cables, a different harness length, or a different mounting arrangement. Verify the existing control before ordering.

OEM and Cross Reference Numbers

Pro Marine 881170A15P cross-references the following Mercury side-mount remote-control numbers.

What This Control is Used For

The side-mount remote control provides helm operation of the mechanical throttle and shift system on compatible Mercury outboard installations.

The control mounts on the side of the helm or console and connects to the engine rigging through the required Mercury electrical harness and Gen 1-style mechanical control cables.

The control also provides convenient power trim and tilt operation from the control handle on the compatible installation.

Mercury Rigging Fitment

Fitment for 881170A15P should be determined by the complete rigging configuration rather than by a broad Mercury horsepower range.

8-Pin vs. 14-Pin Mercury Controls

Mercury side-mount controls are available with different electrical harness configurations. The 881170A15P is the 8-pin version.

Do not confuse this part with Pro Marine 881170A13P, which is intended for a different 14-pin Mercury electrical configuration. Connector type should always be verified before ordering.

Gen 1 Mechanical Control Cable Application

This remote control is specifically identified for compatible Gen 1-style Mercury control cables.

Gen 1 and Gen 2 control systems use different cable attachment configurations. Do not assume interchangeability based only on the appearance of the control box.

Common Replacement Reasons

• Original Mercury side-mount control is worn or damaged.
• Throttle or shift lever movement has become loose or unreliable.
• Control housing or handle is physically damaged.
• Power trim switch in the existing control no longer operates correctly.
• Electrical harness or internal control components are damaged.
• An older cross-reference control is being replaced during a rigging restoration.

Hard shifting or throttle movement can also result from damaged, corroded, binding, or incorrectly adjusted control cables. Inspect the complete control and cable system during diagnosis.

Installation Tips

• Disconnect battery power before working on the control or engine electrical system.
• Verify the original control uses the required Mercury 8-pin electrical connection.
• Confirm the installed throttle and shift cables use the correct Gen 1-style connections.
• Compare the replacement control and harness with the original before installation.
• Inspect existing control cables for stiffness, corrosion, kinks, or damage.
• Route the 15-foot harness without excessive tension, sharp bends, or chafing.
• Route mechanical cables with smooth bends to reduce control effort and binding.
• After installation, verify neutral, shift direction, throttle travel, trim operation, and overall control function.

Because remote-control installation directly affects throttle and shift operation, installation and adjustment should be performed by a qualified marine technician when the installer is not familiar with Mercury mechanical rigging.

Key Features and Benefits

• Pro Marine Brand: Aftermarket alternative to the Mercury OEM control.
• 8-Pin Mercury Configuration: For compatible Mercury 8-pin electrical systems.
• Side Mount Design: Designed for compatible side-mounted helm installations.
• Gen 1 Cable Application: Uses compatible Gen 1-style mechanical control cables.
• 15-Foot Harness: Configured with the specified 15-foot electrical harness.
• Power Trim and Tilt: Provides trim control on compatible Mercury applications.
• OEM Option Available: Genuine Mercury 881170A15 is also stocked by Pro Marine USA.

Frequently Asked Questions

What is Pro Marine 881170A15P?

It is a Pro Marine aftermarket side-mount remote control for compatible Mercury mechanical-control systems using an 8-pin electrical connection, Gen 1-style control cables, and a 15-foot harness.

Does 881170A15P use an 8-pin connector?

Yes. This is the Mercury 8-pin version.

What control cables does it use?

It is intended for Gen 1-style Mercury mechanical control cables.

How long is the harness?

The harness is 15 feet long.

Does the control have trim and tilt operation?

Yes. This application includes power trim and tilt control from the compatible side-mount control.

Does 881170A15P replace Mercury 881170A15?

Yes. 881170A15 is one of the primary Mercury OEM references for this Pro Marine aftermarket control.

What supersedes Mercury 881170A15?

Mercury parts information identifies 8M0178521 as a newer replacement for the earlier 881170A15 control.

Is a genuine Mercury OEM version available?

Yes. Pro Marine USA also carries the Mercury OEM 881170A15 side-mount control .

Is this the same as the 14-pin 881170A13P control?

No. 881170A15P is the 8-pin version. The 881170A13P uses a 14-pin electrical configuration. Verify your existing connector.

Will this work with Mercury Gen 2 cables?

Do not assume compatibility. This control is specifically listed for Gen 1-style control cables.

Will it fit every Mercury outboard?

No. Fitment depends on the complete rigging configuration, including electrical connector, cable type, mounting style, and harness requirements.

Searchable Part Numbers

881170A15P, 16900A15, 16900A20, 8M0178521, 8M0178524, 881170A1, 881170A15, 881170A2, 881170A20, 88170A15

Searchable Terms

Mercury 8 pin side mount control, Mercury side mount remote control, Mercury Gen 1 control, Mercury Gen 1 cable control, Mercury 15 foot harness control, Mercury trim and tilt control, Mercury mechanical remote control, Mercury throttle and shift control, Mercury control box, Mercury 8-pin remote, 881170A15 replacement, 8M0178521 replacement, 8M0178524 replacement, 16900A15 replacement, Pro Marine 881170A15P

881170A13P Mercury 14-Pin Side Mount Remote Control

The Pro Marine 881170A13P Side Mount Remote Control is an aftermarket replacement control for compatible Mercury mechanical rigging systems using a 14-pin electrical connection and Gen 1-style control cables.

This side-mount control is configured with a 15-foot harness and cross-references Mercury control numbers 8M0178536, 8M0178537, 881170A13, and 881170A14.

Product Information

• Pro Marine Part Number: 881170A13P
• Brand: Pro Marine
• Part Type: Side Mount Remote Control
• Application: Compatible Mercury Mechanical-Control Rigging
• Electrical Connection: 14-Pin
• Control Cable Type: Gen 1 Style
• Harness Length: 15 Feet
• Mounting Style: Side Mount

Important Fitment Note

Mercury remote controls should not be selected by engine horsepower alone. The rigging configuration is the important factor when identifying the correct replacement control.

Pro Marine 881170A13P is specifically for compatible Mercury installations requiring a 14-pin electrical connection, Gen 1-style mechanical control cables, and a 15-foot harness.

Before ordering, verify the connector style, control-cable generation, harness requirement, mounting style, and original control part number. A similar-looking Mercury control may use different cables or electrical connections.

OEM and Cross Reference Numbers

Pro Marine 881170A13P cross-references the following Mercury remote-control numbers for compatible applications.

What This Control is Used For

This side-mount remote control provides the helm controls for mechanical throttle and shift operation on compatible Mercury rigging systems.

Unlike a binnacle control that mounts on top of a console, a side-mount control is installed against the side surface of the helm or control area. This makes the mounting style an important part of identifying the correct replacement.

Pro Marine 881170A13P is intended for applications already configured for the corresponding Mercury 14-pin electrical system, Gen 1-style mechanical cables, and 15-foot harness arrangement.

Mercury Rigging Fitment

Fitment for 881170A13P is best identified by the control and rigging configuration rather than by a broad engine horsepower or year range.

Gen 1 Cable Fitment is Important

Mercury mechanical control systems have used different control-cable configurations. This particular control is listed for Gen 1-style control cables.

Do not assume a control designed for Gen 2 cables is interchangeable simply because the electrical connector or mounting style appears similar. Verify the cable ends and original rigging configuration before replacing the control.

What to Check Before Ordering

• Side Mount: Confirm your existing control uses the correct side-mount configuration.
• 14-Pin Connector: Verify the electrical connection matches the Mercury 14-pin configuration.
• Gen 1 Cables: Confirm the throttle and shift cables use the compatible Gen 1-style connection.
• 15-Foot Harness: Verify the harness length and routing are appropriate for the installation.
• Original Part Number: Compare the original control number with 8M0178536, 8M0178537, 881170A13, or 881170A14 whenever possible.

Common Replacement Reasons

• Original side-mount control is worn or physically damaged.
• Control lever operation has become loose, difficult, or unreliable.
• Throttle or shift operation is no longer functioning correctly.
• Control housing or internal mechanism has been damaged.
• Existing control is being replaced during a helm or rigging restoration.
• An older matching Mercury control number is being replaced.

Difficult throttle or shift operation can also be caused by worn, corroded, incorrectly adjusted, or binding control cables. Inspect the entire control and cable system before replacing components.

Installation Tips

• Disconnect battery power before servicing the control or engine electrical system.
• Verify the 14-pin connector before removing or modifying existing rigging.
• Confirm both throttle and shift cables use the required Gen 1-style connections.
• Inspect the existing control cables for corrosion, stiffness, kinks, or excessive wear.
• Verify that the 15-foot harness can be routed correctly without tension or sharp bends.
• Compare the new control with the original before modifying mounting surfaces.
• Route control cables with smooth bends to prevent binding or excessive control effort.
• After installation, verify neutral, shift direction, throttle travel, and overall control operation before operating the boat.

Because the remote control directly affects throttle and shift operation, installation and adjustment should be performed by a qualified marine technician when the installer is not familiar with Mercury mechanical rigging systems.

Key Features and Benefits

• Pro Marine Brand: Aftermarket replacement for compatible Mercury applications.
• Side Mount Design: Designed for compatible side-mounted helm installations.
• Mercury 14-Pin: For compatible Mercury 14-pin electrical systems.
• Gen 1 Cable Application: Designed for Gen 1-style mechanical control cables.
• 15-Foot Harness: Configured with the specified 15-foot harness.
• Mechanical Throttle and Shift: For compatible cable-operated Mercury rigging.
• Multiple OEM References: Cross-references 8M0178536, 8M0178537, 881170A13, and 881170A14.

Frequently Asked Questions

What is Pro Marine 881170A13P?

881170A13P is a Pro Marine aftermarket side-mount remote control for compatible Mercury mechanical-control systems.

What electrical connector does this control use?

It is listed for a Mercury 14-pin electrical connection.

Does 881170A13P use Gen 1 or Gen 2 control cables?

This control is specifically listed for Gen 1-style mechanical control cables.

How long is the harness?

The specified harness length is 15 feet.

Is this a side-mount or top-mount control?

This is a side-mount remote control. It should not be confused with a binnacle / top-mount console control.

Does it replace Mercury 881170A13?

Yes. 881170A13 is one of the supplied Mercury cross-reference numbers for Pro Marine 881170A13P.

Does it replace Mercury 881170A14?

Yes. 881170A14 is also included in the supplied cross-reference list.

What about Mercury 8M0178536 and 8M0178537?

Both 8M0178536 and 8M0178537 are included among the supplied OEM cross references for this control.

Will this work with Gen 2 control cables?

Do not assume compatibility. This control is specifically identified for a Gen 1 cable application. A Gen 2 installation requires the appropriate Gen 2-compatible control or rigging components.

Will this fit any Mercury engine with a 14-pin harness?

No. The 14-pin connection is only one part of the fitment. The installation must also use the compatible Gen 1-style mechanical cables, side-mount configuration, and appropriate harness arrangement.

Is this a digital throttle and shift control?

No. This application uses mechanical throttle and shift control cables.

Searchable Part Numbers

881170A13P, 881170A13, 881170A14, 8M0178536, 8M0178537, 881170 A13, 881170 A14, 8M 0178536, 8M 0178537

Searchable Terms

Mercury side mount control, Mercury side mount remote control, Mercury 14 pin control, Mercury 14-pin remote control, Mercury Gen 1 control, Mercury Gen 1 cable control, Mercury 15 foot harness control, Mercury mechanical remote control, Mercury throttle control, Mercury shift control, Mercury throttle and shift control, Mercury remote control box, 881170A13 replacement, 881170A14 replacement, 8M0178536 replacement, 8M0178537 replacement, Pro Marine 881170A13P

Mercury OEM 8M4507538 14-Pin Gen 2 Binnacle Top Mount Control

The Mercury 8M4507538 Remote Control is a genuine Mercury OEM console / binnacle-mount control for compatible Mercury mechanical-control rigging systems using a 14-pin electrical connection and Gen 2-style control cables.

This top-mount control cross-references Mercury part numbers 8M0041431, 8M0059686, and 883711A12. Pro Marine USA also stocks the Pro Marine 8M0059686P aftermarket version for this application.

Product Information

• Part Number: 8M4507538
• Brand: Genuine Mercury OEM
• Part Type: Binnacle / Top Mount Remote Control
• Application: Compatible Mercury Mechanical-Control Rigging
• Electrical Connection: 14-Pin
• Control Cable Type: Mercury Gen 2 Style
• Mounting Style: Console / Binnacle / Top Mount
• Aftermarket Alternative: Pro Marine 8M0059686P

Important Fitment Note

Do not select this remote control by engine horsepower alone. Compatibility is determined by the Mercury rigging system used on the boat.

This control is for compatible Mercury applications using a 14-pin electrical connection and Gen 2-style mechanical throttle and shift control cables.

Before ordering, verify the electrical connector, control-cable style, mounting configuration, and original remote-control part number. Similar-looking Mercury controls may use a different harness connection, cable generation, or control system.

OEM and Cross Reference Numbers

Mercury 8M4507538 is associated with the following Mercury remote-control numbers for this compatible top-mount, 14-pin / Gen 2 cable application.

What This Control is Used For

The Mercury binnacle control provides the helm interface for mechanical throttle and shift operation on compatible Mercury installations.

The control mounts on top of the boat's console or helm and connects to the compatible Mercury rigging system using Gen 2-style mechanical control cables and the required 14-pin electrical connection.

It can be used when replacing a damaged or worn original control or when rigging a compatible Mercury mechanical-control installation that requires this style of top-mount control.

Mercury Rigging Fitment

Unlike many engine components, a remote control is better identified by the rigging system than by a broad engine horsepower or year range.

Check Your Existing Control Before Ordering

Mercury has used multiple generations and styles of remote controls. Two controls may look similar from the helm while using different electrical connectors or control cables underneath the console.

• 14-Pin: Verify the existing electrical connection matches the required Mercury 14-pin configuration.
• Gen 2 Cables: Confirm the boat uses compatible Mercury Gen 2-style mechanical throttle and shift cables.
• Top Mount: This is for a console / binnacle-style top-mount installation.
• Mechanical Control: Do not assume compatibility with a digital electronic throttle and shift system.
• Original Part Number: Whenever possible, compare the part number from the original control with the cross references on this page.

Common Replacement Reasons

• Original Mercury binnacle control is worn or damaged.
• Control lever operation has become loose, difficult, or unreliable.
• Throttle or shift operation is no longer functioning correctly.
• Control housing or lever has been physically damaged.
• Existing control is being replaced during a helm restoration or re-rig.
• An older matching Mercury control number is being replaced with the current stocked version.

Problems with throttle or shift operation can also be caused by worn, damaged, incorrectly adjusted, or binding control cables. Inspect the complete control and cable system before replacing components.

Installation Tips

• Disconnect battery power before servicing the remote-control electrical system.
• Confirm the existing harness uses the correct Mercury 14-pin connection.
• Verify both throttle and shift cables are the correct Gen 2-style cables.
• Inspect existing cables for corrosion, stiffness, kinks, or excessive wear.
• Compare the new control with the original before changing the console opening or cable routing.
• Avoid sharp cable bends that can increase control effort or cause binding.
• Verify correct shift direction, neutral position, throttle travel, and overall control operation after installation.

Because the remote control directly affects engine throttle and shift operation, installation and adjustment should be performed by a qualified marine technician when the installer is not familiar with Mercury mechanical rigging systems.

Key Features and Benefits

• Genuine Mercury OEM: Factory Mercury remote-control assembly.
• Top Mount Design: For compatible console and binnacle-mount installations.
• 14-Pin Application: Designed for the compatible Mercury 14-pin electrical configuration.
• Gen 2 Cable Application: Uses compatible Mercury Gen 2-style mechanical control cables.
• Mechanical Throttle and Shift: Designed for cable-operated Mercury rigging systems.
• Multiple Cross References: Associated with 8M0041431, 8M0059686, and 883711A12.
• Aftermarket Alternative: Pro Marine 8M0059686P is also available.

Frequently Asked Questions

What is Mercury 8M4507538?

8M4507538 is a genuine Mercury OEM console / binnacle top-mount remote control for compatible Mercury mechanical rigging systems using a 14-pin connection and Gen 2-style control cables.

What control cables does Mercury 8M4507538 use?

This application uses Mercury Gen 2-style mechanical throttle and shift control cables.

Does Mercury 8M4507538 use a 14-pin connector?

Yes. This listing is for the compatible Mercury 14-pin electrical configuration.

Is 8M4507538 a top-mount or side-mount control?

It is a top / console / binnacle-mount control.

Does 8M4507538 replace 8M0059686?

8M0059686 is one of the Mercury OEM cross-reference numbers supplied for this control application.

Does it cross-reference Mercury 8M0041431?

Yes. 8M0041431 is included among the supplied Mercury OEM references for this control.

What about Mercury 883711A12?

883711A12 is also included among the supplied cross references for this compatible control application.

Will this fit every Mercury outboard?

No. Fitment is based on the rigging configuration, not simply engine brand or horsepower. The installation must use the compatible Mercury 14-pin electrical system and Gen 2 mechanical control cables.

Will this replace an 8-pin Mercury control?

Do not assume so. This listing is for a 14-pin application. An 8-pin system uses a different electrical configuration and should be identified before ordering a replacement control.

Can I use this with Gen 1 control cables?

This control is listed for Gen 2-style control cables. A Gen 1 cable installation should not be assumed to be directly compatible.

Is this a digital throttle and shift control?

No. This application uses mechanical Gen 2-style throttle and shift control cables.

Is an aftermarket version available?

Yes. Pro Marine USA also stocks the Pro Marine 8M0059686P binnacle top-mount control for the compatible application.

Searchable Part Numbers

8M4507538, 8M0041431, 8M0059686, 883711A12, 8M0059686P, 8M 4507538, 8M 0041431, 8M 0059686, 883711 A12

Searchable Terms

Mercury OEM binnacle control, Mercury top mount control, Mercury console control, Mercury 14 pin control, Mercury 14-pin remote control, Mercury Gen 2 control, Mercury Gen 2 control box, Mercury Gen 2 cable control, Mercury mechanical throttle control, Mercury mechanical shift control, Mercury throttle and shift control, Mercury console mount remote, Mercury binnacle remote, 8M4507538 remote control, 8M0059686 replacement, 8M0041431 replacement, 883711A12 replacement

8M0059686P Mercury 14-Pin Gen 2 Binnacle Top Mount Control

The Pro Marine 8M0059686P Binnacle / Top Mount Control is an aftermarket remote control for compatible Mercury rigging systems using a 14-pin electrical connection and Gen 2-style mechanical control cables.

Designed for console and binnacle-mount installations, this control is an aftermarket replacement option for Mercury control numbers including 8M0041431, 8M0059686, 8M4507538, and 883711A12.

Product Information

• Pro Marine Part Number: 8M0059686P
• Brand: Pro Marine
• Part Type: Binnacle / Top Mount Remote Control
• Application: Compatible Mercury Rigging Systems
• Electrical Connection: 14-Pin
• Control Cable Type: Mercury Gen 2 Style
• Mounting Style: Top / Console / Binnacle Mount
• OEM Alternative: Mercury 8M4507538

Important Fitment Note

Control boxes should not be ordered by engine horsepower alone. Mercury used different electrical connector styles and different mechanical control-cable generations across its rigging systems.

This control is specifically for compatible applications requiring a 14-pin electrical connection and Mercury Gen 2-style control cables.

Verify the connector style, cable type, mounting arrangement, and original control-box part number before ordering. A Mercury control using an 8-pin connection, Gen 1 cables, digital controls, or another rigging configuration requires a different control.

OEM and Cross Reference Numbers

Pro Marine 8M0059686P cross-references the following Mercury remote-control numbers for the compatible 14-pin / Gen 2 control application.

What This Control is Used For

The binnacle control provides the operator interface for throttle and shift operation on compatible Mercury mechanical-control installations.

This style of control mounts at the helm or console and connects to the engine rigging system using the required Mercury electrical connection and mechanical control cables.

It is commonly used when replacing a worn or damaged remote control, restoring an existing Mercury rigging system, or re-rigging a boat that is already configured for the corresponding Mercury 14-pin and Gen 2 cable system.

Compatible Applications

Fitment for this control is determined primarily by the rigging configuration, not a simple horsepower or model-year range.

Verify Before Replacing Another Mercury Control

Mercury control boxes can look similar while using different rigging systems. This part should not automatically be substituted for a control that uses a different connector or cable generation.

• Do not substitute for an 8-pin control without verifying the complete rigging system.
• Do not substitute for a Gen 1 cable control unless the rigging is being properly converted.
• Do not use as a replacement for a digital electronic throttle and shift control.
• Verify whether the installation requires a single- or multiple-engine control configuration.
• Compare the original Mercury control-box number whenever possible.

Common Replacement Reasons

• Existing binnacle control has excessive wear or internal damage.
• Throttle or shift lever operation has become unreliable or difficult.
• Control housing or lever has been physically damaged.
• Existing control is being replaced during a Mercury re-rig or helm restoration.
• An older matching Mercury OEM control number is being replaced.
• The boat requires a compatible 14-pin top-mount control using Gen 2 cables.

Installation Tips

• Disconnect battery power before servicing the remote-control or engine electrical system.
• Confirm the existing electrical connector is the correct Mercury 14-pin configuration.
• Verify that the installed throttle and shift cables are Mercury Gen 2-style cables.
• Compare the new control with the original unit before modifying the console or cable routing.
• Inspect control cables for stiffness, corrosion, damage, or excessive wear before reconnecting them.
• Route cables without sharp bends or binding that could interfere with throttle or shift movement.
• After installation, verify correct shift direction, neutral position, throttle travel, and control operation before operating the boat.

Remote-control installation affects throttle and shift operation. Installation and adjustment should be performed by a qualified marine technician if you are not familiar with Mercury mechanical rigging systems.

Key Features and Benefits

• Pro Marine Brand: Aftermarket alternative to the corresponding Mercury OEM control.
• Top Mount Design: Designed for binnacle / console-mounted helm installations.
• Mercury 14-Pin: For compatible Mercury 14-pin electrical rigging systems.
• Gen 2 Cable Compatible: Designed for Mercury Gen 2-style mechanical control cables.
• Multiple OEM Cross References: Cross-references 8M0041431, 8M0059686, 8M4507538, and 883711A12.
• OEM Version Available: Genuine Mercury 8M4507538 is also stocked by Pro Marine USA.

Frequently Asked Questions

What is Pro Marine 8M0059686P?

8M0059686P is a Pro Marine aftermarket binnacle / top-mount remote control for compatible Mercury 14-pin rigging systems using Gen 2-style mechanical control cables.

What type of control cables does 8M0059686P use?

It is designed for Mercury Gen 2-style control cables.

What electrical connection does this control use?

This control is listed for a Mercury 14-pin electrical connection.

Is this a side-mount control?

No. This is a binnacle / top-mount console control.

Does 8M0059686P replace Mercury 8M0059686?

Yes. Mercury 8M0059686 is one of the OEM cross-reference numbers listed for Pro Marine 8M0059686P.

Does it replace Mercury 883711A12?

883711A12 is also listed as a cross reference for this compatible control application.

Is Mercury 8M4507538 the OEM version?

Yes. Pro Marine USA stocks Mercury 8M4507538 as the genuine Mercury OEM console / top-mount control option.

Will this fit every Mercury outboard?

No. Compatibility depends on the boat's Mercury rigging system. The application must use the compatible 14-pin connection and Gen 2-style mechanical control cables.

Will this replace an 8-pin Mercury control?

Not as a direct replacement based only on appearance. This control is for the compatible 14-pin system. Verify the complete rigging configuration before changing control types.

Will it work with Mercury Gen 1 control cables?

This listing is specifically for a Gen 2-style control cable application. A Gen 1 cable system should not be assumed compatible.

Is this for digital throttle and shift?

No. This listing is for a control using mechanical Gen 2-style throttle and shift control cables.

Searchable Part Numbers

8M0059686P, 8M0041431, 8M0059686, 8M4507538, 883711A12, 8M0041431P, 8M0059686P, 883711A12 replacement

Searchable Terms

Mercury binnacle control, Mercury top mount control, Mercury console control, Mercury 14 pin control, Mercury 14-pin binnacle, Mercury Gen 2 control, Mercury Gen 2 control box, Mercury Gen 2 cable control, Mercury throttle control, Mercury shift control, Mercury mechanical remote control, Mercury console mount remote, 8M0059686 replacement, 8M0041431 replacement, 8M4507538 replacement, 883711A12 replacement, Pro Marine 8M0059686P