Mercury OEM 8M4507538 14-Pin Gen 2 Binnacle Top Mount Control

The Mercury 8M4507538 Remote Control is a genuine Mercury OEM console / binnacle-mount control for compatible Mercury mechanical-control rigging systems using a 14-pin electrical connection and Gen 2-style control cables.

This top-mount control cross-references Mercury part numbers 8M0041431, 8M0059686, and 883711A12. Pro Marine USA also stocks the Pro Marine 8M0059686P aftermarket version for this application.

Product Information

• Part Number: 8M4507538
• Brand: Genuine Mercury OEM
• Part Type: Binnacle / Top Mount Remote Control
• Application: Compatible Mercury Mechanical-Control Rigging
• Electrical Connection: 14-Pin
• Control Cable Type: Mercury Gen 2 Style
• Mounting Style: Console / Binnacle / Top Mount
• Aftermarket Alternative: Pro Marine 8M0059686P

Important Fitment Note

Do not select this remote control by engine horsepower alone. Compatibility is determined by the Mercury rigging system used on the boat.

This control is for compatible Mercury applications using a 14-pin electrical connection and Gen 2-style mechanical throttle and shift control cables.

Before ordering, verify the electrical connector, control-cable style, mounting configuration, and original remote-control part number. Similar-looking Mercury controls may use a different harness connection, cable generation, or control system.

OEM and Cross Reference Numbers

Mercury 8M4507538 is associated with the following Mercury remote-control numbers for this compatible top-mount, 14-pin / Gen 2 cable application.

What This Control is Used For

The Mercury binnacle control provides the helm interface for mechanical throttle and shift operation on compatible Mercury installations.

The control mounts on top of the boat's console or helm and connects to the compatible Mercury rigging system using Gen 2-style mechanical control cables and the required 14-pin electrical connection.

It can be used when replacing a damaged or worn original control or when rigging a compatible Mercury mechanical-control installation that requires this style of top-mount control.

Mercury Rigging Fitment

Unlike many engine components, a remote control is better identified by the rigging system than by a broad engine horsepower or year range.

Check Your Existing Control Before Ordering

Mercury has used multiple generations and styles of remote controls. Two controls may look similar from the helm while using different electrical connectors or control cables underneath the console.

• 14-Pin: Verify the existing electrical connection matches the required Mercury 14-pin configuration.
• Gen 2 Cables: Confirm the boat uses compatible Mercury Gen 2-style mechanical throttle and shift cables.
• Top Mount: This is for a console / binnacle-style top-mount installation.
• Mechanical Control: Do not assume compatibility with a digital electronic throttle and shift system.
• Original Part Number: Whenever possible, compare the part number from the original control with the cross references on this page.

Common Replacement Reasons

• Original Mercury binnacle control is worn or damaged.
• Control lever operation has become loose, difficult, or unreliable.
• Throttle or shift operation is no longer functioning correctly.
• Control housing or lever has been physically damaged.
• Existing control is being replaced during a helm restoration or re-rig.
• An older matching Mercury control number is being replaced with the current stocked version.

Problems with throttle or shift operation can also be caused by worn, damaged, incorrectly adjusted, or binding control cables. Inspect the complete control and cable system before replacing components.

Installation Tips

• Disconnect battery power before servicing the remote-control electrical system.
• Confirm the existing harness uses the correct Mercury 14-pin connection.
• Verify both throttle and shift cables are the correct Gen 2-style cables.
• Inspect existing cables for corrosion, stiffness, kinks, or excessive wear.
• Compare the new control with the original before changing the console opening or cable routing.
• Avoid sharp cable bends that can increase control effort or cause binding.
• Verify correct shift direction, neutral position, throttle travel, and overall control operation after installation.

Because the remote control directly affects engine throttle and shift operation, installation and adjustment should be performed by a qualified marine technician when the installer is not familiar with Mercury mechanical rigging systems.

Key Features and Benefits

• Genuine Mercury OEM: Factory Mercury remote-control assembly.
• Top Mount Design: For compatible console and binnacle-mount installations.
• 14-Pin Application: Designed for the compatible Mercury 14-pin electrical configuration.
• Gen 2 Cable Application: Uses compatible Mercury Gen 2-style mechanical control cables.
• Mechanical Throttle and Shift: Designed for cable-operated Mercury rigging systems.
• Multiple Cross References: Associated with 8M0041431, 8M0059686, and 883711A12.
• Aftermarket Alternative: Pro Marine 8M0059686P is also available.

Frequently Asked Questions

What is Mercury 8M4507538?

8M4507538 is a genuine Mercury OEM console / binnacle top-mount remote control for compatible Mercury mechanical rigging systems using a 14-pin connection and Gen 2-style control cables.

What control cables does Mercury 8M4507538 use?

This application uses Mercury Gen 2-style mechanical throttle and shift control cables.

Does Mercury 8M4507538 use a 14-pin connector?

Yes. This listing is for the compatible Mercury 14-pin electrical configuration.

Is 8M4507538 a top-mount or side-mount control?

It is a top / console / binnacle-mount control.

Does 8M4507538 replace 8M0059686?

8M0059686 is one of the Mercury OEM cross-reference numbers supplied for this control application.

Does it cross-reference Mercury 8M0041431?

Yes. 8M0041431 is included among the supplied Mercury OEM references for this control.

What about Mercury 883711A12?

883711A12 is also included among the supplied cross references for this compatible control application.

Will this fit every Mercury outboard?

No. Fitment is based on the rigging configuration, not simply engine brand or horsepower. The installation must use the compatible Mercury 14-pin electrical system and Gen 2 mechanical control cables.

Will this replace an 8-pin Mercury control?

Do not assume so. This listing is for a 14-pin application. An 8-pin system uses a different electrical configuration and should be identified before ordering a replacement control.

Can I use this with Gen 1 control cables?

This control is listed for Gen 2-style control cables. A Gen 1 cable installation should not be assumed to be directly compatible.

Is this a digital throttle and shift control?

No. This application uses mechanical Gen 2-style throttle and shift control cables.

Is an aftermarket version available?

Yes. Pro Marine USA also stocks the Pro Marine 8M0059686P binnacle top-mount control for the compatible application.

Searchable Part Numbers

8M4507538, 8M0041431, 8M0059686, 883711A12, 8M0059686P, 8M 4507538, 8M 0041431, 8M 0059686, 883711 A12

Searchable Terms

Mercury OEM binnacle control, Mercury top mount control, Mercury console control, Mercury 14 pin control, Mercury 14-pin remote control, Mercury Gen 2 control, Mercury Gen 2 control box, Mercury Gen 2 cable control, Mercury mechanical throttle control, Mercury mechanical shift control, Mercury throttle and shift control, Mercury console mount remote, Mercury binnacle remote, 8M4507538 remote control, 8M0059686 replacement, 8M0041431 replacement, 883711A12 replacement