What This Rigging Tube is Used For

F6N200 wraps around an existing outboard rigging bundle to help protect, organize and clean up exposed wiring, hoses and cables.

Depending on the engine and boat configuration, the sleeve may be used around:

• Engine wiring harnesses
• Battery cables
• Throttle and shift cables
• Fuel hose
• Hydraulic steering hoses
• Gauge and network wiring
• Trim wiring
• Accessory wiring

Why Choose 2" Wrappable Braided Rigging Tube?

The main advantage of a wrappable sleeve is that it can be installed around an existing engine rigging bundle instead of requiring all of the cables, hoses and harnesses to be disconnected and pulled through a closed tube.

The 2" size provides more room for larger or more complex rigging bundles and is useful when the 1.5" version would compress the components too tightly.

Common reasons to choose F6N200 include:

• Larger outboard rigging bundles
• Engines already fully connected and rigged
• Rerigging and cleanup projects
• Adding abrasion protection to exposed wiring and hoses
• Improving the appearance of an older transom installation
• Avoiding unnecessary disconnection of engine harnesses and hoses

Need the 1.5" Braided Version?

1.5" Wrappable Split Braided Tube - F6N150

Smaller 1.5" wraparound braided sleeve for more compact outboard wiring, cable and hose bundles.

If the rigging bundle fits comfortably inside 1.5", the smaller size can provide a tighter and cleaner finished installation.

View 1.5" Braided Rigging Tube

Split Conduit Rigging Tube Options

Pro Marine also stocks split conduit for customers who prefer a more traditional split protective tube instead of braided wrap.

1.5" Split Conduit - SPLITTUBING-15

Smaller split-conduit option for wrapping around compact existing rigging bundles.

View 1.5" Split Conduit

2" Split Conduit - SPLITTUBING-2

2" split-conduit option for larger existing engine wiring, hose and cable bundles.

View 2" Split Conduit

Traditional 2" Rigging Tube Options

For new installations where the engine rigging can be fed through a conventional closed tube, Pro Marine stocks 2" rigging tube in black and white.

2" Black Rigging Tube - RIGTUBE-B

Traditional black 2" outboard rigging tube sold by the foot for clean new installations.

View Black 2" Rigging Tube

2" White Rigging Tube - RIGTUBE-W

White 2" outboard rigging tube for installations where a lighter color better matches the hull, transom or engine.

View White 2" Rigging Tube

Rigging Tube Style Comparison

Related 2" Rigging Hardware

2" Transom Flange - TFLANGE-2

Standard transom flange for traditional 2" closed rigging-tube installations.

View Transom Flange

2" T-Flange with Fuel Port - TFLANGE-FP

2" transom flange with a dedicated fuel-line port for compatible outboard rigging installations.

View Fuel Port Flange

2" Rigging Hose Union - TUNION

Joins two compatible sections of traditional 2" rigging tube for extensions or repairs.

View Rigging Hose Union

Installation Tips

• Measure the complete cable and hose bundle before selecting sleeve size.
• Use the 2" version when 1.5" braided tubing would fit too tightly.
• Wrap the sleeve around the existing rigging rather than disconnecting the engine unnecessarily.
• Do not tightly compress fuel hose, hydraulic hoses or control cables.
• Leave sufficient slack for full steering movement.
• Check full trim and tilt travel after the sleeve is installed.
• Avoid tight bends that could strain the components inside the sleeve.
• Inspect wiring, hoses and cables for damage before covering them.
• Replace damaged components rather than using the sleeve to hide existing damage.

When Should Wrappable Rigging Tube Be Replaced?

Inspect the braided sleeve periodically along with the wiring and hoses it protects.

Replacement may be appropriate if you find:

• Torn or frayed braided material
• Heavy abrasion
• Sections that no longer stay wrapped around the bundle
• UV or environmental deterioration
• Exposed wiring, hoses or cables
• A rigging bundle that has outgrown the existing sleeve

Key Features and Benefits

• 2" wrappable split braided rigging tube
• 5-foot length
• Black finish
• Universal marine application
• Pro Marine aftermarket product
• Installs around existing engine rigging
• Provides additional room for larger cable and hose bundles
• Helps organize and protect exposed rigging
• 1.5" braided version available
• Split-conduit and traditional rigging-tube alternatives available

FAQ

What size is F6N200?
F6N200 is a 2" wrappable split braided rigging tube.

How long is F6N200?
F6N200 is supplied in a 5-foot length.

What color is it?
F6N200 is black.

What is the advantage of wrappable rigging tube?
It can be installed around existing outboard wiring, hoses and cables without completely disconnecting the engine rigging.

When should I use the 2" size instead of 1.5"?
Use the 2" version when the rigging bundle will not fit comfortably inside the 1.5" F6N150 .

Do you also stock split conduit?
Yes. Pro Marine stocks 1.5" split conduit and 2" split conduit .

Do you stock traditional closed rigging tube?
Yes. Pro Marine stocks 2" black rigging tube and 2" white rigging tube .

Do you carry transom rigging hardware?
Yes. Pro Marine stocks the standard 2" transom flange , 2" flange with fuel port , and 2" rigging hose union .

Searchable Terms

F6N200, 2 inch braided rigging tube, 2 inch rigging sleeve, wrappable rigging tube, split braided tube, outboard rigging sleeve, marine cable protection, outboard wiring sleeve, 5 foot rigging tube, F6N150, SPLITTUBING-15, SPLITTUBING-2, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION

How to Order Bulk Fuel Hose

This hose is sold by the foot. Enter the quantity based on the continuous hose length required for your installation.

For example, if your fuel-system layout requires 10 feet of hose, order a quantity of 10.

What is Type A Marine Fuel Hose?

Type A marine fuel hose is designed for installations requiring the additional fire-resistant protection associated with the Type A classification.

It is commonly used in enclosed and below-deck fuel-system routing and in other locations where Type A hose is specified by the boat builder, engine manufacturer or applicable installation requirements.

Fuel hose should always be selected based on both hose diameter and installation type.

Complete Your 3/8" Fuel Line Setup

Pro Marine stocks the matching clamp, primer bulb and Oetiker installation tools needed to build or service a 3/8" marine fuel-line assembly.

Oetiker 4-185 Ear Clamp - 10 Pack

Matching Oetiker ear clamp for this 3/8" Type A marine fuel hose.

Clamp: 4-185

View Oetiker 4-185 Clamp

Pro Marine 8005 - 3/8" Primer Bulb

Matching 3/8" primer bulb for compatible outboard fuel-line assemblies using 3/8" hose.

Hose Size: 3/8"

View 3/8" Primer Bulb

Oetiker Standard Jaw Pincer Tool

Installation tool for properly closing Oetiker ear clamps on marine fuel-line connections.

View Oetiker Pincer Tool

Oetiker Clamp Pack with Tool

Assortment of commonly used Oetiker clamp sizes with the installation tool included. A convenient option for marine shops and technicians servicing multiple fuel-line sizes.

View Oetiker Clamp Pack

3/8" Type B Alternative

3/8" Type B Marine Fuel Hose - 375

Type B alternative for exposed and above-deck fuel-line installations where Type B hose is appropriate.

Inside Diameter: 3/8"
Fuel Hose Type: Type B
Matching Clamp: Oetiker 4-185
Primer Bulb: Pro Marine 8005 - 3/8"

View 3/8" Type B Fuel Hose

3/8" Type A vs. Type B Fuel Hose

Same Clamp for Both 3/8" Fuel Hoses

Both the 375-1 Type A and 375 Type B 3/8" fuel hoses use the same Oetiker 4-185 ear clamp.

That makes clamp selection simple when changing between these two 3/8" hose types. The main consideration is the required fuel-hose classification for the installation.

What This Fuel Hose is Used For

The 375-1 3/8" Type A fuel hose is intended for building, repairing or replacing marine fuel lines requiring 3/8" Type A hose.

Selling the hose by the foot makes it suitable for custom-length installations and allows it to be paired with the appropriate primer bulb, fittings, connectors and clamps.

Building a 3/8" Type A Fuel Line

Depending on the application, a complete setup may include:

• 375-1 3/8" Type A marine fuel hose
• Pro Marine 8005 3/8" primer bulb
• Correct tank-side fitting or connector
• Correct engine-side fitting or connector
• Oetiker 4-185 ear clamps
• Oetiker pincer installation tool

Primer Bulb Selection

Primer bulb fittings should match the inside diameter of the fuel hose. For 3/8" fuel line, use the Pro Marine 8005 3/8" Primer Bulb.

View Pro Marine 8005 3/8" Primer Bulb

Key Features & Benefits

• 3/8" inside diameter
• Type A marine fuel-hose construction
• Designed for installations requiring Type A fire-resistant protection
• Commonly used in enclosed and below-deck marine fuel systems
• Sold by the foot for custom-length installations
• Uses Oetiker 4-185 ear clamp
• Matching Pro Marine 8005 3/8" primer bulb available
• 3/8" Type B alternative available
• Type A and Type B 3/8" hoses use the same 4-185 clamp
• Oetiker pincer installation tool available
• Complete Oetiker clamp assortment with tool available

Need Help Choosing the Right Marine Fuel Hose?

Fuel-hose diameter is only one part of choosing the correct line. Installation location, Type A or Type B classification, primer bulb size, fittings and clamp selection should all be considered.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is the 375-1 fuel hose?
This hose has a 3/8" inside diameter.

Is this fuel hose sold by the foot?
Yes. Order the quantity corresponding to the number of feet needed.

What type of marine fuel hose is 375-1?
The 375-1 is Type A marine fuel hose.

Where is Type A fuel hose commonly used?
Type A hose is commonly selected for enclosed and below-deck installations and other fuel-system applications requiring its additional fire-resistant classification.

Which clamp fits this hose?
Use the Oetiker 4-185 ear clamp .

Which primer bulb fits this hose?
Use the Pro Marine 8005 3/8" Primer Bulb .

What if I need 3/8" Type B fuel hose?
Use the 375 3/8" Type B Marine Fuel Hose .

Does the Type B hose use the same clamp?
Yes. Both 3/8" Type A and Type B hoses use the Oetiker 4-185 ear clamp.

Can I use the same primer bulb on Type A and Type B hose?
Yes. Both hoses use a 3/8" inside diameter, so the Pro Marine 8005 3/8" primer bulb matches both.

What tool installs the Oetiker clamp?
Use the Oetiker Standard Jaw Pincer Tool .

Do you sell a clamp assortment?
Yes. The Oetiker Clamp Pack with Tool includes common clamp sizes and the installation tool.

Searchable Part Numbers & Terms

375-1, 3/8 Type A fuel hose, 3/8 marine fuel hose, 3/8 boat fuel line, below deck fuel hose, enclosed marine fuel line, Type A marine fuel hose, marine fuel line by the foot, bulk marine fuel hose, outboard fuel line, boat fuel hose, Oetiker 4-185, 4-185 fuel hose clamp, 8005, Pro Marine 8005, 3/8 primer bulb, marine primer bulb, outboard primer bulb, 375, 3/8 Type B fuel hose, marine fuel system, boat fuel line