S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Johnson, Evinrude & E-TEC Outboard Parts
Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Johnson, Evinrude & E-TEC Parts by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Find the Correct Johnson, Evinrude or E-TEC Part
Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Johnson, Evinrude & E-TEC Engine Families
Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.
- Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
- Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
- V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
- High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
- Ficht / FFI: direct-injection Johnson and Evinrude engine families
- E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges
Common Johnson & Evinrude Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
- No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
- Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?
- OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
- Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of older OMC-era parts and modern E-TEC service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Johnson or Evinrude outboard part?
Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.
Can I search Johnson and Evinrude parts by OEM part number?
Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Johnson and Evinrude parts vary by model and year?
Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.
Do you carry parts for Evinrude E-TEC engines?
Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.
Do you carry parts for older Johnson and Evinrude outboards?
Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.
What Johnson and Evinrude parts are commonly replaced during routine maintenance?
Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.
Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Hydraulic Steering System with Tilt Helm
Pro Marine 350-TSTEER Hydraulic Steering System
The Pro Marine 350-TSTEER Hydraulic Steering System is a complete hydraulic steering package with an all-new tilt helm for smooth, responsive steering control on high-horsepower outboard boats.
This universal Pro Marine hydraulic steering system is designed for outboard applications up to 350HP. It includes the main steering components needed for installation, but does not include hydraulic hoses.
What a Hydraulic Steering System with Tilt Helm Does
A hydraulic steering system uses a helm pump, hydraulic fluid, hoses, and a steering cylinder to turn the outboard engine. When the steering wheel is turned, the helm moves fluid through the system and operates the cylinder mounted at the engine.
The tilt helm allows the steering wheel angle to be adjusted for driver comfort while maintaining smooth hydraulic steering response. This is especially helpful on center consoles, bay boats, and performance boats where the operator may switch between seated and standing driving positions.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Single Outboards up to 350HP | Complete hydraulic steering installation with tilt helm comfort |
| Center Console Boats | Adjustable steering wheel angle for seated or standing operation |
| Bay Boats | Smooth steering control for shallow-water and open-water use |
| Bass Boats | Responsive steering feel and reduced steering effort |
| Repower Projects | Upgrade from cable steering to hydraulic steering |
Complete or Service Your Steering System
Hydraulic Hoses
This steering system does not include hoses. Choose the correct hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesHydraulic Fluid
Use quality hydraulic steering fluid when filling and bleeding your hydraulic steering system.
View PRO-OIL15 Hydraulic FluidFill Hose Assembly
A fill hose assembly helps simplify hydraulic steering system filling and bleeding during installation.
View 102P Fill Hose AssemblyBleed Kit
Bleed kits help remove trapped air from hydraulic steering cylinders and hoses during service or installation.
View 350-BLEEDKITKey Features and Benefits
- Complete hydraulic steering system with tilt helm
- Universal outboard steering application
- Designed for single outboards up to 350HP
- All-new tilt helm for adjustable steering wheel position
- Helps reduce steering effort compared to cable steering
- Improves steering response and handling control
- Good choice for center consoles, bay boats, bass boats, and repowers
- Does not include hydraulic steering hoses
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Complete hydraulic steering system with tilt helm
- Part Number: 350-TSTEER
- Application: Universal outboard hydraulic steering
- Horsepower Rating: Single outboards up to 350HP
- Connection Type: Hydraulic steering hose circuit
- Included Components: Steering cylinder, tilt helm, hydraulic fluid, and fill hose assembly
- Not Included: Hydraulic steering hoses
- Related Components: Hydraulic hoses, steering fluid, bleed kit, fittings, and steering wheel
FAQ
What is included with the 350-TSTEER hydraulic steering system?
This kit includes the main hydraulic steering system components, including the steering cylinder, tilt helm, hydraulic fluid, and fill hose assembly.
Does this kit include hydraulic steering hoses?
No. The 350-TSTEER hydraulic steering system does not include hoses. Hydraulic hoses must be selected separately based on your boat layout and required hose length.
What is the advantage of a tilt helm?
A tilt helm allows the steering wheel angle to be adjusted for improved comfort, visibility, and driving position.
What outboards can this steering system be used with?
This system is designed for universal single outboard hydraulic steering applications up to 350HP.
Can this replace cable steering?
Yes. This hydraulic steering system is commonly used to upgrade boats from traditional cable steering to smoother hydraulic steering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-TSTEER, hydraulic steering system with tilt helm, Pro Marine tilt helm steering kit, outboard hydraulic steering kit, universal hydraulic steering system, 350HP steering system, hydraulic steering without hoses, SeaStar style steering kit, Uflex style steering kit, Pro Marine hydraulic steering