S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Johnson, Evinrude & E-TEC Outboard Parts
Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Johnson, Evinrude & E-TEC Parts by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Find the Correct Johnson, Evinrude or E-TEC Part
Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Johnson, Evinrude & E-TEC Engine Families
Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.
- Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
- Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
- V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
- High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
- Ficht / FFI: direct-injection Johnson and Evinrude engine families
- E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges
Common Johnson & Evinrude Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
- No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
- Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?
- OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
- Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of older OMC-era parts and modern E-TEC service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Johnson or Evinrude outboard part?
Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.
Can I search Johnson and Evinrude parts by OEM part number?
Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Johnson and Evinrude parts vary by model and year?
Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.
Do you carry parts for Evinrude E-TEC engines?
Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.
Do you carry parts for older Johnson and Evinrude outboards?
Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.
What Johnson and Evinrude parts are commonly replaced during routine maintenance?
Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.
Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
0389142
0390011
0391049
0432955
0432956
0435673
0436954
0436955
0436957
0438591
0777804
432955
777804
802497
802499
802499A1
879028
9-43208
0316981
0327640
0327810
0338742
0364998
0766477
338742
364998
766477
Evinrude E-TEC G2 Thermostat Service Kit
Evinrude E-TEC G2 200-300HP Thermostat Kit - 13345
The 13345 Thermostat Kit is designed for select Evinrude E-TEC G2 200HP through 300HP outboards.
Verified engine families include AB250 / AB300, AF200-300, AG200-300 and AH200-300 E-TEC G2 models.
This kit brings together the thermostat service components commonly needed when servicing the thermostat assembly, with related thermostat cover and spring references listed below.
AB: 250HP / 300HP
AF: 200-300HP
AG: 200-300HP
AH: 200-300HP
Fitment
| Evinrude E-TEC G2 Model Family | Horsepower |
|---|---|
| AB | 250HP / 300HP |
| AF | 200HP through 300HP |
| AG | 200HP through 300HP |
| AH | 200HP through 300HP |
Verify your complete Evinrude model designation before ordering. E-TEC G2 engines were produced in multiple model families and horsepower configurations, and thermostat components should be confirmed against the exact engine application.
Thermostat Kit Components
The thermostat assembly uses the following components. Stocked items are linked below for quick replacement, while the thermostat cover and spring are noted as special-order components.
Thermostat Cap O-Ring - 1188
Sealing O-ring used at the thermostat cap / cover assembly.
Thermostat cover used with the E-TEC G2 thermostat assembly.
Status: Special Order
Spring used in the thermostat assembly to maintain the proper thermostat position and operation.
Status: Special Order
Thermostat Gasket - 10-1155
Replacement gasket used to seal the thermostat assembly during installation.
143°F Brass Thermostat - 403
Replacement thermostat used in compatible Evinrude E-TEC G2 cooling-system applications.
Temperature: 143°F
What is Included
The 13345 Thermostat Kit is intended to simplify thermostat service on compatible Evinrude E-TEC G2 engines.
The thermostat system uses the components shown above, including the thermostat, thermostat gasket, thermostat cap O-ring, thermostat cover and spring. Verify the exact contents of the 13345 package shown on the product listing before ordering any individual components separately.
Why Replace the Thermostat?
The thermostat regulates coolant flow through the engine so the powerhead reaches and maintains the correct operating temperature.
A thermostat that sticks open can cause the engine to operate too cool, while a thermostat that sticks closed or does not open correctly can contribute to elevated engine temperature or overheating.
Common Reasons for Thermostat Service
- Routine cooling-system maintenance
- Engine running hotter than normal
- Engine running cooler than expected
- Thermostat sticking or corroded
- Salt or mineral buildup around the thermostat housing
- Cooling-system inspection during major engine service
- Damaged thermostat gasket or O-ring
- Thermostat housing opened for inspection or repair
Inspect the Complete Thermostat Assembly
When the thermostat housing is opened, inspect more than just the thermostat. The gasket, cap O-ring, spring and thermostat cover should also be checked for wear, corrosion, damage or deterioration.
Replacing damaged sealing components during thermostat service can help prevent coolant leaks and avoid reopening the housing for a minor seal failure later.
Thermostat Service Components
| Component | Part Number | Availability |
|---|---|---|
| Thermostat Cap O-Ring | 1188 | Linked Above |
| Thermostat Cover | 5008903 | Special Order |
| Thermostat Spring | 0351145 | Special Order |
| Thermostat Gasket | 10-1155 | Linked Above |
| 143°F Brass Thermostat | 403 | Linked Above |
Key Features and Benefits
- Thermostat service kit for Evinrude E-TEC G2 outboards
- Fits select G2 200HP through 300HP applications
- Fits AB250 and AB300 model families
- Fits AF200-300 model families
- Fits AG200-300 model families
- Fits AH200-300 model families
- 143°F replacement thermostat available separately
- Thermostat gasket available separately
- Thermostat cap O-ring available separately
- Thermostat cover 5008903 available by special order
- Thermostat spring 0351145 available by special order
- Convenient option when servicing the complete thermostat assembly
FAQ
What engines does thermostat kit 13345 fit?
It fits select Evinrude E-TEC G2 200-300HP engines,
including AB250 / AB300 and AF, AG and AH 200-300HP model families.
Does this fit Evinrude E-TEC G2 300HP?
Yes. The supplied fitment includes multiple 300HP G2 applications within
the AB, AF, AG and AH model families.
What thermostat is used with this kit?
The linked 403 brass thermostat is rated at
143°F.
Can I buy the thermostat separately?
Yes. The 403 thermostat is linked above.
Can I buy the thermostat gasket separately?
Yes. The 10-1155 thermostat gasket is linked above.
Can I buy the thermostat O-ring separately?
Yes. The 1188 thermostat cap O-ring is linked above.
Is the thermostat cover available?
Yes. Thermostat cover 5008903 is listed as
special order.
Is the thermostat spring available?
Yes. Spring 0351145 is available by special order.
Should I replace the gasket and O-ring when servicing the thermostat?
Inspect both sealing components whenever the housing is opened and replace
them if they are damaged, hardened, flattened or otherwise unsuitable for
reuse.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help verifying your E-TEC G2 model?
Contact Pro Marine
Phone: 941-721-3000
Searchable Terms
13345, Evinrude 13345, Evinrude thermostat kit, Evinrude ETEC G2 thermostat, Evinrude E-TEC G2 thermostat kit, G2 200 thermostat, G2 225 thermostat, G2 250 thermostat, G2 300 thermostat, AB250 thermostat, AB300 thermostat, AF200 thermostat, AF225 thermostat, AF250 thermostat, AF300 thermostat, AG200 thermostat, AG225 thermostat, AG250 thermostat, AG300 thermostat, AH200 thermostat, AH225 thermostat, AH250 thermostat, AH300 thermostat, 1188, thermostat cap o-ring, 5008903, Evinrude thermostat cover, 0351145, Evinrude thermostat spring, 10-1155, Evinrude thermostat gasket, 403, Evinrude 143 thermostat, 143 degree thermostat, ETEC G2 cooling system, Evinrude G2 cooling parts
0174955
0175103
0175107
0175109
0175231
0175247
0435555
0435556
0435558
0435560
0435742
0435781
0435782
0435784
0435926
0435936
0435952
0435953
0435955
0435956
0436203
0436206
0438094
0438400
0769076
5004558
5007420
769076
0765577
335362
765577
0432443
0435009
174404
3852225
432443
435009
435009
Pro Marine SHOWA Tilt & Trim Seal Kit
Evinrude Johnson 40-300HP SHOWA Tilt & Trim Seal Kit - 4519P
The Pro Marine 4519P Tilt & Trim Seal Kit is an aftermarket replacement seal kit for compatible SHOWA hydraulic power trim and tilt assemblies used on a very wide range of Johnson, Evinrude, OMC, and BRP outboards.
This kit replaces OEM numbers 0434519, 434519, 0778218, and 778218. Verified applications extend from select 40HP through 300HP engines and include conventional 2-stroke models, Ficht / FFI engines, direct-injection and E-TEC families, 3.3L and 3.4L V6 engines, and later Evinrude G2 2.7L V6 applications.
Compatible Applications
| Engine Family | Verified Application Range |
|---|---|
| Johnson / Evinrude 40-90HP | Select 40, 50, 60, 65, 70, 75, 88, and 90HP outboards using compatible SHOWA trim and tilt assemblies. |
| Johnson / Evinrude 100-140HP | Select 100, 105, 115, 120, 125, 130, 135, and 140HP models including standard, commercial, jet, Ficht / FFI, and later direct-injection configurations. |
| Johnson / Evinrude 150-185HP | Extensive 150, 175, and 185HP coverage including standard, counter-rotation, commercial, military, Ficht / FFI, H.O., and multiple shaft-length configurations. |
| Johnson / Evinrude 200-225HP | Extensive 200 and 225HP applications including 60-degree V6, 90-degree V6 3.3L, Ficht / RAM Injection, H.O., counter-rotation, and 20", 25", and 30" shaft configurations. |
| Evinrude 250HP | Select 250HP 90-degree V6 3.3L and 3.4L applications including standard, H.O., Ficht / RAM Injection, counter-rotation, and multiple shaft lengths. |
| Evinrude 300HP | Select 300HP 90-degree V6 3.4L applications in standard, counter-rotation, and multiple shaft-length configurations. |
| Evinrude Ficht / FFI | Numerous 75-250HP Ficht Fuel Injection and FFI applications are included in the verified model list. |
| Evinrude E-TEC / Direct Injection | Numerous later direct-injection applications including 60-degree V6, 3.3L V6, and 3.4L V6 model families. |
| Evinrude G2 2.7L V6 | Select G2 150HP, 175HP, and 200HP 66-degree 2.7L V6 applications, including standard and counter-rotation configurations. |
This seal kit has an extremely broad application range, but not every Johnson or Evinrude engine uses the same trim and tilt unit.
Verify the complete engine model number and confirm that the SHOWA trim / tilt assembly calls for OEM seal kit 0434519, 434519, 0778218, or 778218 before ordering.
Notable Fitment Families
- Johnson and Evinrude 40-90HP outboards
- Johnson and Evinrude 100-140HP outboards
- Johnson and Evinrude 150-175HP V6 outboards
- Johnson and Evinrude 200-225HP V6 outboards
- Select Evinrude 250HP 3.3L and 3.4L V6 models
- Select Evinrude 300HP 3.4L V6 models
- Ficht / FFI fuel-injected applications
- Ficht RAM Injection applications
- Evinrude E-TEC / direct-injection applications
- Evinrude H.O. applications
- Standard and counter-rotation models
- 20", 25", and 30" shaft configurations where listed
- Commercial and select military applications
- Evinrude G2 150, 175, and 200HP 2.7L V6 applications
OEM & Cross Reference Numbers
| Brand / Type | Part Number |
|---|---|
| Pro Marine | 4519P |
| OMC / BRP OEM | 0434519 |
| OMC / BRP OEM | 434519 |
| OMC / BRP OEM | 0778218 |
| OMC / BRP OEM | 778218 |
OEM BRP / OMC Version Available
OEM BRP / OMC 434519 SHOWA Tilt & Trim Seal Kit
Prefer the original factory seal kit? The OEM 434519 SHOWA tilt and trim seal kit is available for the same compatible applications.
What This Part is Used For
The power trim and tilt unit uses hydraulic pressure to raise, lower, trim, and tilt the outboard. Internal seals and O-rings keep hydraulic fluid contained while allowing the trim and tilt pistons to move under pressure.
Over time, hydraulic seals can harden, flatten, tear, or wear. A leaking SHOWA trim unit may lose fluid, slowly allow the engine to settle down after being trimmed up, or fail to maintain the selected trim position.
The Pro Marine 4519P seal kit provides an aftermarket option for rebuilding compatible SHOWA hydraulic trim and tilt assemblies instead of replacing the complete trim unit.
Common Signs Your Trim & Tilt Unit Needs Service
- Hydraulic fluid leaking around trim or tilt cylinder rods
- Engine slowly settles down after being trimmed or tilted up
- Trim system will not hold the selected position
- Repeated need to add trim / tilt fluid
- Visible fluid around the SHOWA hydraulic assembly
- Old rod seals appear cracked, flattened, or deteriorated
Why Choose the Pro Marine 4519P?
- Pro Marine aftermarket SHOWA trim and tilt seal kit
- Lower-cost alternative to the OEM 434519 seal kit
- Replaces OEM numbers 0434519, 434519, 0778218, and 778218
- Extensive Johnson, Evinrude, OMC, and BRP application coverage
- Fits select applications from 40HP through 300HP
- Coverage includes conventional, Ficht / FFI, E-TEC, and G2 engine families
- Used on compatible SHOWA hydraulic power trim and tilt assemblies
- Helps repair hydraulic leaks without replacing the complete trim unit
- OEM 434519 version linked above
FAQ
What does Pro Marine 4519P replace?
Pro Marine 4519P replaces OEM numbers 0434519, 434519, 0778218,
and 778218.
What engines does 4519P fit?
It fits a very large number of Johnson, Evinrude, OMC, and BRP outboards
equipped with compatible SHOWA trim and tilt assemblies. Verified
applications range from select 40HP engines through 300HP models.
Does it fit older Johnson and Evinrude models?
Yes. The verified fitment includes numerous engines from the early and
late 1990s as well as later BRP / Evinrude applications.
Does it fit Ficht and FFI engines?
Yes. Numerous Ficht / FFI and Ficht RAM Injection applications are
included in the supplied fitment.
Does it fit Evinrude E-TEC models?
Yes. Numerous direct-injection Evinrude model families are included in the
verified application list.
Does 4519P fit Evinrude G2 engines?
Yes. Verified applications include select G2 150HP, 175HP, and 200HP
66-degree 2.7L V6 models.
Does it fit 250HP and 300HP Evinrude engines?
Yes. The supplied fitment includes numerous 250HP 3.3L / 3.4L and 300HP
3.4L V6 model numbers.
Is this an OEM seal kit?
No. This is the Pro Marine aftermarket version. The OEM
BRP / OMC 434519 seal kit is linked above.
How should I verify fitment?
Use your complete Johnson / Evinrude model number and verify that the SHOWA
trim and tilt assembly calls for one of the OEM numbers listed above.
Horsepower alone is not enough to identify the correct seal kit.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
4519P, Pro Marine 4519P, 434519, 0434519, 0778218, 778218, OMC 434519, BRP 434519, Evinrude SHOWA seal kit, Johnson SHOWA seal kit, Evinrude tilt trim seal kit, Johnson tilt trim seal kit, SHOWA hydraulic seal kit, Evinrude trim cylinder seals, Johnson trim cylinder seals, Evinrude power trim repair kit, Johnson power trim repair kit, 40HP Evinrude trim seal kit, 90HP Evinrude trim seal kit, 115HP Evinrude trim seal kit, 150HP Evinrude trim seal kit, 175HP Evinrude trim seal kit, 200HP Evinrude trim seal kit, 225HP Evinrude trim seal kit, 250HP Evinrude trim seal kit, 300HP Evinrude trim seal kit, Evinrude Ficht trim seal kit, Evinrude E-TEC trim seal kit, Evinrude G2 trim seal kit, aftermarket 434519 seal kit
0778218
434519
778218