Engine Gaskets | Johnson Evinrude Outboard

Pro Marine Aftermarket Suzuki and Johnson Evinrude Engine Components

Pro Marine Cylinder Head Gasket for Suzuki DF100A DF115A DF140 DF140A and Johnson Evinrude 140 HP Outboards

The Pro Marine 9214 Cylinder Head Gasket is an aftermarket replacement for select Suzuki DF100A, DF115A, DF140, and DF140A 4-stroke outboard engines, along with compatible Johnson and Evinrude 140 HP 4-stroke outboards.

This replacement head gasket cross references Suzuki OEM part numbers 11141-92J00 and 11141-92J01, as well as Johnson Evinrude BRP OEM numbers 5033908 and 5034644.

The cylinder head gasket is installed between the engine block and cylinder head. It provides the sealing interface required to maintain combustion chamber compression while separating the engine's cooling and lubrication passages.

Applications include earlier Suzuki DF140, DF140T, and DF140Z engines listed from 2002-2010, later Suzuki DF100A, DF115A, and DF140A engine configurations, and the specific Johnson Evinrude 140 HP models listed below.

Important: Verify the original OEM head gasket number and your engine model and serial number before ordering. Not every Suzuki 100-140 HP or Johnson Evinrude 140 HP outboard uses this gasket.

Product Information

• Pro Marine Part Number: 9214
• Brand: Pro Marine Aftermarket
• Product Type: Cylinder Head Gasket
• Suzuki OEM Cross References: 11141-92J00, 11141-92J01
• Johnson Evinrude BRP Cross References: 5033908, 5034644
• Engine Manufacturers: Suzuki, Johnson, Evinrude
• Engine Type: 4-Stroke Outboard
• Suzuki Horsepower: 100 HP, 115 HP, and 140 HP
• Johnson Evinrude Horsepower: 140 HP
• Suzuki Engine Families: DF100A, DF115A, DF140, DF140A
• Additional Suzuki Variations: DF100AT, DF115AST, DF115AT, DF115AZ, DF115ST, DF140T, DF140Z, DF140AT, DF140AZ
• Earlier Suzuki DF140 Applications: 2002-2010
• Later Suzuki Applications: Listed DF100A, DF115A, and DF140A configurations
• Installation Location: Between Cylinder Head and Engine Block
• Condition: New

OEM and Cross Reference Numbers

Pro Marine 9214 is an aftermarket replacement for the following Suzuki and Johnson Evinrude cylinder head gasket part numbers.

These numbers are provided to help identify the correct replacement when searching by Suzuki, Johnson, Evinrude, or BRP original equipment part numbers.

What This Part Is Used For

The cylinder head gasket creates a seal between the cylinder head and engine block of a compatible 4-stroke outboard engine.

It helps maintain combustion chamber pressure while separating cooling water, engine oil, and combustion passages.

A damaged head gasket may allow combustion gases or engine fluids to leak across sealing surfaces, potentially resulting in compression loss, overheating, or internal engine contamination.

Common Repair Applications

• Suzuki DF100A 100 HP cylinder head repairs
• Suzuki DF115A 115 HP cylinder head repairs
• Suzuki DF140 140 HP cylinder head repairs
• Suzuki DF140A 140 HP cylinder head repairs
• Johnson 140 HP 4-stroke cylinder head repairs
• Evinrude 140 HP 4-stroke cylinder head repairs
• Replacement of damaged or leaking head gaskets
• Engine repairs requiring cylinder head removal
• Internal engine rebuilding and service

Important Fitment Note

Pro Marine 9214 replaces the listed Suzuki and Johnson Evinrude OEM head gasket numbers.

Suzuki DF140 engines from the earlier 2002-2010 applications are listed separately from the later DF140A engine family. The supplied compatibility data also includes select DF100A and DF115A applications.

Suzuki model letters and serial number references help distinguish engine configurations. Compatibility should be confirmed using the exact engine identification information.

Do not assume compatibility with every Suzuki 100 HP, 115 HP, or 140 HP engine or every Johnson Evinrude 140 HP outboard. Verify the required OEM gasket number.

Compatible Outboard Applications

The following tables organize the supplied Suzuki and Johnson Evinrude fitment into readable engine families and model groups.

Suzuki DF100A - 100 HP 4-Stroke

Suzuki DF115A - 115 HP 4-Stroke

Suzuki DF140 - 140 HP 4-Stroke - 2002-2010

The earlier Suzuki DF140 engine family includes the standard DF140 and the listed DF140T and DF140Z variations.

Suzuki DF140A - 140 HP 4-Stroke

The supplied application data also includes the later Suzuki DF140A engine family, with a 2013 catalog listing and additional model and serial configurations.

Johnson and Evinrude 140 HP 4-Stroke Outboards

Pro Marine 9214 is also listed for the following Johnson and Evinrude 140 HP 4-stroke engine model numbers.

The model numbers are grouped to make identification easier while preserving the supplied application references.

Common Symptoms of a Failed Head Gasket

A damaged cylinder head gasket may allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

Possible symptoms include:

• Loss of cylinder compression
• Engine overheating
• Cooling water entering a combustion chamber
• Water contamination in engine oil
• Rough running or misfiring
• Reduced engine power
• Difficulty starting
• Combustion gases entering the cooling system
• Visible damage to the original head gasket

Installation and Service Tips

Cylinder head gasket replacement requires removal of the cylinder head and inspection of the engine's sealing surfaces. Follow the applicable Suzuki or Johnson Evinrude service manual for the exact engine model.

Recommended Installation Practices

• Confirm the original Suzuki or BRP OEM gasket number.
• Verify the engine model and serial number.
• Allow the engine to cool completely before disassembly.
• Remove the cylinder head according to the applicable service manual.
• Inspect the cylinder head and engine block sealing surfaces.
• Check for warpage, corrosion, cracks, and other damage.
• Remove old gasket material without damaging the sealing surfaces.
• Keep debris out of cylinders, oil passages, and cooling passages.
• Install the replacement gasket in the correct orientation.
• Follow the manufacturer's specified tightening sequence and torque procedure.
• Replace additional seals or fasteners when required by the service manual.
• Inspect the cooling system for conditions that may have caused the original failure.
• Check engine operation and cooling performance after reassembly.

Key Features and Benefits

• Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and Johnson Evinrude OEM head gaskets.
• Suzuki 100-140 HP Applications: Listed for select DF100A, DF115A, DF140, and DF140A 4-stroke outboards.
• Johnson Evinrude Compatibility: Fits the specified 140 HP 4-stroke model applications.
• Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
• Combustion Chamber Sealing: Provides the gasket interface between the cylinder head and engine block.
• Cooling and Lubrication Passage Sealing: Helps maintain separation between internal engine passages.
• Multiple OEM Cross References: Suzuki 11141-92J00 and 11141-92J01, plus BRP 5033908 and 5034644.
• Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM part numbers does Pro Marine 9214 replace?

Pro Marine 9214 cross references Suzuki 11141-92J00 and 11141-92J01.

What Johnson Evinrude OEM numbers does this gasket replace?

This gasket cross references BRP 5033908 and 5034644.

Does this head gasket fit Suzuki DF100A outboards?

Yes. It is listed for select Suzuki DF100A 100 HP 4-stroke applications, including DF100A and DF100AT configurations.

Does this head gasket fit Suzuki DF115A outboards?

Yes. It is listed for select Suzuki DF115A 115 HP 4-stroke applications, including DF115A, DF115AST, DF115AT, and DF115AZ configurations. The supplied fitment also includes a DF115ST application.

Does this gasket fit Suzuki DF140 outboards from 2002-2010?

Yes. The supplied fitment includes Suzuki DF140, DF140T, and DF140Z 140 HP 4-stroke applications from 2002-2010.

Does this gasket fit Suzuki DF140A outboards?

Yes. It is listed for select Suzuki DF140A 140 HP 4-stroke applications, including DF140A, DF140AT, and DF140AZ configurations.

Does this gasket fit Johnson and Evinrude 140 HP outboards?

Yes. It is listed for the specific Johnson Evinrude 140 HP 4-stroke model numbers shown in the compatibility table.

Will this gasket fit every Suzuki 100-140 HP outboard?

No. Compatibility is limited to the listed engine models using the corresponding OEM head gasket numbers. Other Suzuki engine families may require different gaskets.

What does a cylinder head gasket do?

The cylinder head gasket seals the joint between the cylinder head and engine block. It helps maintain compression while separating combustion, cooling, and lubrication passages.

What are common symptoms of a blown head gasket?

Possible symptoms include compression loss, overheating, rough running, water intrusion, and engine oil contamination. Proper diagnostic testing is required to confirm the cause.

Should I replace the head gasket after removing the cylinder head?

Yes. Install a new compatible cylinder head gasket when reassembling the engine after cylinder head removal.

Is Pro Marine 9214 a genuine Suzuki or BRP OEM gasket?

No. Pro Marine 9214 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.

Can I install this head gasket myself?

Cylinder head gasket replacement requires engine disassembly, inspection of sealing surfaces, and proper tightening procedures. Professional installation is recommended.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 within the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
• Shipping options available through UPS, USPS, and FedEx.
• Typical delivery time is 1-5 business days.

30-Day Return Policy

• Eligible returns are accepted within 30 days.
• Parts must be new, unused, and in original packaging.
• Installed parts are not returnable.
• Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 9214 is the correct cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

9214, 11141-92J00, 11141-92J01, 1114192J00, 1114192J01, 5033908, 5034644

Searchable Terms

Pro Marine 9214, Suzuki 11141-92J00, Suzuki 11141-92J01, Suzuki 1114192J00, Suzuki 1114192J01, Johnson Evinrude 5033908, Johnson Evinrude 5034644, Suzuki head gasket, Suzuki cylinder head gasket, Suzuki DF100A head gasket, Suzuki DF100AT head gasket, Suzuki DF115A head gasket, Suzuki DF115AST head gasket, Suzuki DF115AT head gasket, Suzuki DF115AZ head gasket, Suzuki DF115ST head gasket, Suzuki DF140 head gasket, Suzuki DF140T head gasket, Suzuki DF140Z head gasket, Suzuki DF140A head gasket, Suzuki DF140AT head gasket, Suzuki DF140AZ head gasket, Suzuki 100HP head gasket, Suzuki 115HP head gasket, Suzuki 140HP head gasket, Suzuki 4 stroke head gasket, Suzuki 100-140 HP cylinder head gasket, Johnson 140HP head gasket, Evinrude 140HP head gasket, Johnson Evinrude 140HP 4 stroke, Johnson Evinrude cylinder head gasket, BRP head gasket, J140CX4SOR head gasket, J140CX4SRC head gasket, J140CX4STS head gasket, J140CX4SDA head gasket, J140PL4SOR head gasket, J140PL4SRC head gasket, J140PL4STS head gasket, J140PL4SDA head gasket, J140PX4SOR head gasket, J140PX4SRS head gasket, J140PX4STS head gasket, J140PX4SDA head gasket, BJ140CX4SRS head gasket, BJ140PL4SRS head gasket, BJ140PX4SRS head gasket, BJ140CX4SOC head gasket, BJ140PL4SOC head gasket, BJ140PX4SOC head gasket, BJ140CX4DR head gasket, BJ140L4SDR head gasket, BJ140X4SDR head gasket, Suzuki outboard engine repair, Suzuki cylinder head repair, Suzuki engine rebuild parts, Johnson Evinrude engine rebuild parts, aftermarket Suzuki head gasket, aftermarket Johnson Evinrude head gasket, Pro Marine Suzuki engine parts

Pro Marine Aftermarket Suzuki and Johnson Evinrude Engine Components

Pro Marine Cylinder Head Gasket for Suzuki DF40 DF50 and Johnson Evinrude 40-50 HP 4-Stroke Outboards

The Pro Marine 8741 Cylinder Head Gasket is an aftermarket replacement for select Suzuki DF40 and DF50 40-50 HP 4-stroke outboards from 1999-2010, along with compatible Johnson and Evinrude 40 HP and 50 HP 4-stroke outboard engines.

This replacement head gasket cross references Suzuki OEM part numbers 11141-87J00, 11141-87J01, and 11141-87J02, as well as Johnson Evinrude BRP OEM numbers 5031293 and 5034353.

Installed between the cylinder head and engine block, the gasket provides the sealing interface required to maintain combustion chamber compression while separating the engine's cooling and lubrication passages.

Pro Marine 8741 is suitable for compatible cylinder head repairs, head gasket replacement, and engine rebuilding applications. It is an aftermarket alternative to the listed genuine OEM gasket numbers.

Important: This gasket is intended for the listed Suzuki DF40 and DF50 engine families and compatible Johnson Evinrude 40-50 HP 4-stroke models. Confirm the engine model and original OEM gasket number before ordering.

Product Information

• Pro Marine Part Number: 8741
• Brand: Pro Marine Aftermarket
• Product Type: Cylinder Head Gasket
• Suzuki OEM Cross References: 11141-87J00, 11141-87J01, 11141-87J02
• Johnson Evinrude BRP Cross References: 5031293, 5034353
• Engine Manufacturers: Suzuki, Johnson, Evinrude
• Engine Type: 4-Stroke Outboard
• Horsepower: 40 HP and 50 HP
• Suzuki Engine Families: DF40, DF40QH, DF40TL, DF50, DF50QH, DF50TL
• Suzuki Model Years: 1999-2010 on Listed Applications
• Johnson Evinrude Applications: Select 40 HP and 50 HP 4-Stroke Models
• Installation Location: Between Cylinder Head and Engine Block
• Condition: New

OEM and Cross Reference Numbers

Pro Marine 8741 is an aftermarket replacement for the following Suzuki and Johnson Evinrude cylinder head gasket part numbers.

These part numbers are provided to help customers identify the correct replacement when searching by original Suzuki, Johnson, Evinrude, or BRP numbers.

What This Part Is Used For

The cylinder head gasket seals the connection between the engine block and cylinder head of a 4-stroke outboard engine.

The gasket helps maintain combustion chamber pressure while separating the engine's cooling water and oil passages.

When a head gasket fails, combustion pressure or engine fluids may leak across sealing surfaces. Depending on the failure location, this can lead to compression loss, overheating, water intrusion, or other engine problems.

Common Repair Applications

• Suzuki DF40 40 HP 4-stroke cylinder head repairs
• Suzuki DF50 50 HP 4-stroke cylinder head repairs
• Johnson 40 HP 4-stroke cylinder head repairs
• Johnson 50 HP 4-stroke cylinder head repairs
• Evinrude 40 HP 4-stroke cylinder head repairs
• Evinrude 50 HP 4-stroke cylinder head repairs
• Replacement of leaking or damaged head gaskets
• Cylinder head removal and reinstallation
• Engine rebuilding and internal engine repairs

Important Fitment Note

Pro Marine 8741 is intended for the earlier Suzuki DF40 and DF50 4-stroke engine families, along with the listed Johnson Evinrude 40-50 HP 4-stroke models.

The Suzuki applications supplied for this gasket cover 1999-2010, depending on the engine model.

This gasket should not be confused with head gaskets used on the later Suzuki DF40A, DF50A, and DF60A engine families.

Suzuki DF40 and DF50 engines are not the same application family as DF40A and DF50A engines. The correct gasket must be selected using the OEM part number and engine identification.

For Johnson and Evinrude applications, verify the exact model number and corresponding BRP OEM gasket number. Not every Johnson or Evinrude 40-50 HP outboard uses this gasket.

Compatible Outboard Applications

Pro Marine 8741 is listed for select Suzuki DF40 and DF50 outboards and compatible Johnson Evinrude 40 HP and 50 HP 4-stroke engines.

Suzuki DF40 and DF50 4-Stroke Outboards

The following table summarizes the supplied Suzuki fitment by engine family and model year range.

Johnson and Evinrude 40 HP and 50 HP 4-Stroke Outboards

This gasket also cross references BRP OEM numbers 5031293 and 5034353 and is listed for the following Johnson and Evinrude 4-stroke outboard models.

Common Symptoms of a Failed Head Gasket

A damaged head gasket can allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

The following conditions may indicate a cylinder head gasket problem.

• Loss of cylinder compression
• Engine overheating
• Cooling water entering a combustion chamber
• Water contamination in engine oil
• Rough running or misfiring
• Reduced engine performance
• Difficulty starting
• Combustion gases entering the cooling system
• Visible gasket damage during engine disassembly

Installation and Service Tips

Replacing a cylinder head gasket requires removal of the cylinder head and inspection of the engine's sealing surfaces. Follow the applicable Suzuki or Johnson Evinrude service manual.

Recommended Installation Practices

• Confirm the original OEM gasket number.
• Verify the engine model and applicable year.
• Allow the engine to cool before disassembly.
• Remove the cylinder head following the service manual.
• Inspect the cylinder head and block sealing surfaces.
• Check for warpage, corrosion, cracks, or damage.
• Remove old gasket material without damaging sealing surfaces.
• Keep debris out of the cylinders and internal passages.
• Install the replacement gasket in the correct orientation.
• Follow the specified cylinder head fastener tightening sequence.
• Use the required fastener tightening specifications.
• Replace other gaskets and seals when required by the repair procedure.
• Inspect the cooling system for conditions that may have caused the original failure.
• Check engine operation and cooling performance after reassembly.

Key Features and Benefits

• Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and Johnson Evinrude OEM head gaskets.
• Suzuki 40-50 HP Applications: Listed for DF40 and DF50 4-stroke outboards from 1999-2010.
• Johnson Evinrude Compatibility: Fits the specified 40 HP and 50 HP 4-stroke model applications.
• Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
• Combustion Chamber Sealing: Provides the gasket interface between the cylinder head and engine block.
• Cooling and Lubrication Passage Sealing: Helps maintain separation between internal engine passages.
• Multiple OEM Cross References: Search using Suzuki 11141-87J00, 11141-87J01, 11141-87J02, or BRP 5031293 and 5034353.
• Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM numbers does Pro Marine 8741 replace?

Pro Marine 8741 cross references 11141-87J00, 11141-87J01, and 11141-87J02.

What Johnson Evinrude OEM numbers does this gasket replace?

This gasket cross references 5031293 and 5034353.

Does this head gasket fit Suzuki DF40 outboards?

Yes. It is listed for Suzuki DF40 40 HP 4-stroke outboards from 1999-2010, along with DF40QH and DF40TL variants from 1999-2007.

Does this head gasket fit Suzuki DF50 outboards?

Yes. It is listed for Suzuki DF50 50 HP 4-stroke outboards from 1999-2010, along with DF50QH and DF50TL variants from 1999-2007.

Does this gasket fit Johnson 40 HP and 50 HP outboards?

Yes. The supplied fitment includes select Johnson 40 HP and 50 HP 4-stroke engines, including the listed J40, J50, BJ40, and BJ50 model numbers.

Does this gasket fit Evinrude 40 HP and 50 HP outboards?

Yes. It is listed for select Evinrude 40 HP and 50 HP 4-stroke engines, including E40PL4EES, E40PL4SIR, E40PL4SSC, E50PL4EES, E50PL4SIR, and E50PL4SSC.

Will this gasket fit Suzuki DF40A or DF50A outboards?

This gasket is listed for the earlier DF40 and DF50 engine families, not the later DF40A and DF50A applications. Always confirm the OEM gasket number before ordering.

What is the difference between Suzuki DF40 and DF40A head gaskets?

Suzuki DF40 and DF40A engines belong to different application families and may use different cylinder head gaskets. Pro Marine 8741 cross references Suzuki 11141-87J00, 11141-87J01, and 11141-87J02. Select the gasket that matches the engine's OEM parts diagram.

What does a cylinder head gasket do?

The cylinder head gasket seals the joint between the engine block and cylinder head, helping maintain compression and separation between combustion, cooling, and lubrication passages.

What are symptoms of a blown head gasket?

Possible symptoms include compression loss, overheating, rough running, water intrusion, and contamination of engine oil. Proper diagnostic testing is required to confirm the cause.

Should I replace the head gasket after removing the cylinder head?

Yes. Install a new compatible cylinder head gasket when reassembling the engine after cylinder head removal.

Is Pro Marine 8741 a genuine Suzuki or BRP OEM gasket?

No. Pro Marine 8741 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.

Can I install this head gasket myself?

Cylinder head gasket replacement requires engine disassembly, inspection of sealing surfaces, and proper fastener tightening. Professional installation is recommended.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 within the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
• Shipping options available through UPS, USPS, and FedEx.
• Typical delivery time is 1-5 business days.

30-Day Return Policy

• Eligible returns are accepted within 30 days.
• Parts must be new, unused, and in original packaging.
• Installed parts are not returnable.
• Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 8741 is the correct cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

8741, 11141-87J00, 11141-87J01, 11141-87J02, 1114187J00, 1114187J01, 1114187J02, 5031293, 5034353

Searchable Terms

Pro Marine 8741, Suzuki 11141-87J00, Suzuki 11141-87J01, Suzuki 11141-87J02, Johnson Evinrude 5031293, Johnson Evinrude 5034353, Suzuki head gasket, Suzuki cylinder head gasket, Suzuki DF40 head gasket, Suzuki DF50 head gasket, Suzuki DF40QH head gasket, Suzuki DF40TL head gasket, Suzuki DF50QH head gasket, Suzuki DF50TL head gasket, Suzuki 40HP head gasket, Suzuki 50HP head gasket, Suzuki 4 stroke head gasket, Suzuki 1999 head gasket, Suzuki 2000 head gasket, Suzuki 2001 head gasket, Suzuki 2002 head gasket, Suzuki 2003 head gasket, Suzuki 2004 head gasket, Suzuki 2005 head gasket, Suzuki 2006 head gasket, Suzuki 2007 head gasket, Suzuki 2008 head gasket, Suzuki 2009 head gasket, Suzuki 2010 head gasket, Johnson 40HP head gasket, Johnson 50HP head gasket, Evinrude 40HP head gasket, Evinrude 50HP head gasket, Johnson 4 stroke head gasket, Evinrude 4 stroke head gasket, Johnson Evinrude cylinder head gasket, BRP head gasket, J40PL4SNF head gasket, J50PL4SNF head gasket, E40PL4EES head gasket, E40PL4SIR head gasket, E40PL4SSC head gasket, E50PL4EES head gasket, E50PL4SIR head gasket, E50PL4SSC head gasket, Suzuki outboard engine repair, Suzuki cylinder head repair, Suzuki engine rebuild parts, Johnson Evinrude engine rebuild parts, aftermarket Suzuki head gasket, aftermarket Johnson Evinrude head gasket, Pro Marine Suzuki engine parts

Pro Marine Aftermarket Suzuki and Johnson Evinrude V6 Engine Components

Pro Marine Port Cylinder Head Gasket for Suzuki DF200 DF225 DF250 V6 4-Stroke Outboards

The Pro Marine 9324 Port Cylinder Head Gasket is an aftermarket replacement for the port cylinder head on select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards. Applications include 200 HP, 225 HP, and 250 HP Suzuki engines, along with specified Johnson and Evinrude 200 HP and 225 HP 4-stroke outboards.

This gasket cross references Suzuki OEM 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03, and 11142-93J10, along with Johnson Evinrude BRP OEM numbers 5034854, 5035971, and 5036630.

Installed between the port cylinder head and engine block, the head gasket helps maintain combustion chamber compression while sealing the engine's cooling water and lubrication passages.

Compatible applications include select Suzuki DF200, DF225, and DF250 engines from 2004-2010, additional 2013 and 2015 catalog applications, and later serial-specific model configurations.

Important: This is the PORT SIDE ONLY. The matching starboard-side cylinder head gasket is sold separately as Pro Marine 9314 .

Important: Port and Starboard Head Gaskets Are Different

Compatible Suzuki DF200, DF225, and DF250 V6 outboards use separate cylinder head gaskets for the port and starboard cylinder banks.

• Port Side (PORT): Pro Marine 9324 - Suzuki OEM 11142-93J10
• Starboard Side (STBD): Pro Marine 9314 - Suzuki OEM 11141-93J10

These gaskets are not interchangeable. Verify which cylinder bank is being serviced before ordering.

Product Information

• Pro Marine Part Number: 9324
• Brand: Pro Marine Aftermarket
• Product Type: Cylinder Head Gasket
• Cylinder Bank: Port (PORT)
• Primary Suzuki OEM Reference: 11142-93J10
• Additional Suzuki OEM References: 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03
• Johnson Evinrude BRP References: 5034854, 5035971, 5036630
• Engine Manufacturers: Suzuki, Johnson, Evinrude
• Engine Type: V6 4-Stroke Outboard
• Suzuki Horsepower: 200 HP, 225 HP, 250 HP
• Johnson Evinrude Horsepower: 200 HP, 225 HP
• Suzuki Engine Families: DF200, DF225, DF250
• Additional Suzuki Variations: DF200T, DF200Z, DF225T, DF225Z, DF250T, DF250Z and listed DF250ST configurations
• Earlier Suzuki Applications: 2004-2010
• Additional Catalog Listings: 2013, 2015, and specified later configurations
• Matching Starboard Gasket: Pro Marine 9314
• Condition: New

Matching Starboard Side Cylinder Head Gasket Available

Servicing both cylinder heads on your Suzuki DF200, DF225, or DF250 V6 outboard? The matching starboard-side gasket is available separately from Pro Marine USA.

Pro Marine 9314 - STBD Cylinder Head Gasket

Matching aftermarket starboard-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.

Suzuki OEM: 11141-93J10
Location: Starboard Cylinder Bank
Sold Separately

View Matching Starboard Head Gasket

OEM and Cross Reference Numbers

Pro Marine 9324 replaces the following Suzuki and Johnson Evinrude port cylinder head gasket numbers.

What This Part Is Used For

The port cylinder head gasket seals the connection between the port cylinder head and engine block on compatible Suzuki and Johnson Evinrude V6 outboards.

Its purpose is to maintain combustion chamber compression while separating the engine's cooling water and lubrication passages.

This gasket is used during repairs involving the port cylinder head, including head gasket replacement, cylinder head service, and compatible V6 engine rebuilding.

Common Repair Applications

• Suzuki DF200 V6 port cylinder head repairs
• Suzuki DF225 V6 port cylinder head repairs
• Suzuki DF250 V6 port cylinder head repairs
• Johnson 200 HP and 225 HP 4-stroke V6 repairs
• Evinrude 200 HP and 225 HP 4-stroke V6 repairs
• Replacement of a leaking or damaged port head gasket
• Engine repairs requiring port cylinder head removal
• Compatible V6 outboard engine rebuilding

Important Fitment Note

Pro Marine 9324 is a PORT-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.

The supplied fitment includes earlier 2004-2010 Suzuki applications, additional 2013 and 2015 catalog listings, and specific later model variations identified by serial references.

Certain specialized DF250 configurations, including DF250ST applications, may require additional OEM verification. Confirm the exact port-side gasket number in the engine's parts diagram.

Do not order by horsepower alone. Verify the engine model, serial number, cylinder bank, and OEM gasket number.

Compatible Suzuki Outboard Applications

Pro Marine 9324 is listed for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboard engines.

The following tables organize the supplied model and serial information into readable engine families.

Suzuki DF200 - 200 HP V6 4-Stroke

Suzuki DF225 - 225 HP V6 4-Stroke

Suzuki DF250 - 250 HP V6 4-Stroke

Compatible Johnson and Evinrude Outboard Applications

Pro Marine 9324 also cross references BRP port head gasket numbers 5034854, 5035971, and 5036630.

The following Johnson Evinrude 200 HP and 225 HP 4-stroke models are included in the supplied fitment.

Common Symptoms of a Failed Cylinder Head Gasket

A damaged head gasket may allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

Possible symptoms include:

• Loss of cylinder compression
• Engine overheating
• Cooling water entering a combustion chamber
• Water contamination in engine oil
• Rough running or engine misfires
• Reduced engine performance
• Difficulty starting
• Combustion gases entering the cooling system
• Visible gasket damage during cylinder head removal

Installation and Service Tips

Cylinder head gasket replacement requires removal of the appropriate cylinder head and inspection of the engine's sealing surfaces. Follow the service manual for the exact engine model.

Recommended Installation Practices

• Verify the engine model and serial number.
• Confirm the port cylinder bank is being serviced.
• Confirm the required Suzuki or BRP OEM gasket number.
• Allow the engine to cool before disassembly.
• Remove the cylinder head according to the service manual.
• Inspect the cylinder head and engine block sealing surfaces.
• Check for warpage, corrosion, cracks, and other damage.
• Remove old gasket material without damaging the sealing surfaces.
• Keep debris out of cylinders and internal passages.
• Install the replacement gasket in the correct orientation.
• Follow the manufacturer's specified tightening sequence and procedure.
• Replace additional seals or fasteners when required by the service manual.
• Inspect the cooling system for conditions that may have caused the original failure.
• Check engine operation and cooling performance after reassembly.

Key Features and Benefits

• Port-Specific Design: Intended for the port cylinder head on compatible V6 outboards.
• Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and BRP OEM port head gaskets.
• Suzuki 200-250 HP Applications: Listed for select DF200, DF225, and DF250 V6 4-stroke engines.
• Johnson Evinrude Compatibility: Listed for the specified 200 HP and 225 HP 4-stroke models.
• Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
• Combustion Chamber Sealing: Provides the gasket interface between the port cylinder head and engine block.
• Matching Starboard Gasket Available: Pro Marine 9314 is sold separately.
• Dealer Pricing Available: Qualified marine businesses can apply for wholesale pricing.

Frequently Asked Questions

Is Pro Marine 9324 the port or starboard head gasket?

Pro Marine 9324 is the port-side cylinder head gasket. The matching starboard gasket is Pro Marine 9314.

What Suzuki OEM numbers does Pro Marine 9324 replace?

It cross references 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03, and 11142-93J10.

What Johnson Evinrude OEM numbers does this gasket replace?

The listed BRP cross references are 5034854, 5035971, and 5036630.

What is the matching starboard head gasket?

The matching starboard gasket is Pro Marine 9314 , which cross references Suzuki OEM 11141-93J10.

Does this gasket fit Suzuki DF200 outboards?

Yes. It is listed for select Suzuki DF200 200 HP V6 4-stroke outboards, including DF200, DF200T, and DF200Z applications.

Does this gasket fit Suzuki DF225 outboards?

Yes. It is listed for select Suzuki DF225 225 HP V6 4-stroke outboards, including DF225, DF225T, and DF225Z applications.

Does this gasket fit Suzuki DF250 outboards?

Yes. It is listed for select Suzuki DF250 250 HP V6 4-stroke outboards, including DF250, DF250T, and DF250Z applications. DF250ST applications should be confirmed against the OEM diagram.

Does this gasket fit Johnson and Evinrude 200 HP and 225 HP outboards?

Yes. It is listed for the specific Johnson Evinrude 200 HP and 225 HP 4-stroke model numbers shown in the compatibility table.

Can I use the port gasket on the starboard side?

No. The port and starboard cylinder banks require their corresponding head gaskets. Pro Marine 9324 is for the port side only.

Do I need both head gaskets for a V6 engine rebuild?

If both cylinder heads are removed, each cylinder bank requires its correct replacement gasket. The port and starboard gaskets are sold separately.

Is Pro Marine 9324 a genuine Suzuki OEM gasket?

No. Pro Marine 9324 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 within the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
• Shipping options available through UPS, USPS, and FedEx.
• Typical delivery time is 1-5 business days.

30-Day Return Policy

• Eligible returns are accepted within 30 days.
• Parts must be new, unused, and in original packaging.
• Installed parts are not returnable.
• Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 9324 is the correct port cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

9324, 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03, 11142-93J10, 1114293J00, 1114293J01, 1114293J02, 1114293J03, 1114293J10, 5034854, 5035971, 5036630

Searchable Terms

Pro Marine 9324, Suzuki 11142-93J00, Suzuki 11142-93J01, Suzuki 11142-93J02, Suzuki 11142-93J03, Suzuki 11142-93J10, Johnson Evinrude 5034854, Johnson Evinrude 5035971, Johnson Evinrude 5036630, Suzuki port head gasket, Suzuki PORT head gasket, Suzuki left cylinder head gasket, Suzuki V6 cylinder head gasket, Suzuki DF200 port head gasket, Suzuki DF200T port head gasket, Suzuki DF200Z port head gasket, Suzuki DF225 port head gasket, Suzuki DF225T port head gasket, Suzuki DF225Z port head gasket, Suzuki DF250 port head gasket, Suzuki DF250T port head gasket, Suzuki DF250Z port head gasket, Suzuki 200HP head gasket, Suzuki 225HP head gasket, Suzuki 250HP head gasket, Suzuki 200-250 HP head gasket, Suzuki 4 stroke port head gasket, Suzuki outboard cylinder head gasket, Johnson 200HP port head gasket, Johnson 225HP port head gasket, Evinrude 200HP port head gasket, Evinrude 225HP port head gasket, Johnson Evinrude V6 head gasket, BRP port head gasket, J200CX4SRS head gasket, J200PX4SRS head gasket, J225CX4SRS head gasket, J225PX4SRS head gasket, BJ200CX4SDC head gasket, BJ200X4SDC head gasket, BJ225CX4SDC head gasket, BJ225X4SDC head gasket, BJ200CX4SO head gasket, BJ200PX4SO head gasket, BJ225CX4SO head gasket, BJ225PX4SO head gasket, J200CX4SOC head gasket, J200PX4SOC head gasket, J225CX4SOC head gasket, J225CZ4SOS head gasket, J225PX4SOC head gasket, J225PZ4SOS head gasket, Suzuki V6 engine rebuild, Suzuki cylinder head repair, Suzuki outboard engine repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts, Pro Marine 9314 matching starboard gasket

Pro Marine Aftermarket Suzuki and Johnson Evinrude V6 Engine Components

Pro Marine Starboard Cylinder Head Gasket for Suzuki DF200 DF225 DF250 V6 4-Stroke Outboards

The Pro Marine 9314 Starboard Cylinder Head Gasket is an aftermarket replacement for the starboard (STBD) cylinder head on select Suzuki DF200, DF225, and DF250 200-250 HP V6 4-stroke outboard engines.

This gasket also fits the specified Johnson and Evinrude 200 HP and 225 HP 4-stroke V6 outboards listed in the compatibility tables below.

Pro Marine 9314 cross references Suzuki OEM 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, and 11141-93J10, along with BRP OEM 5034853, 5035938, and 5036629.

The gasket seals the starboard cylinder head to the engine block, helping maintain combustion chamber compression while separating cooling water and engine lubrication passages.

Important: This is the STARBOARD SIDE ONLY. The matching port-side cylinder head gasket is sold separately as Pro Marine 9324 .

Important: Starboard and Port Head Gaskets Are Different

Suzuki DF200, DF225, and DF250 V6 engines use separate cylinder head gaskets for the starboard and port cylinder banks.

• Starboard Side (STBD): Pro Marine 9314 - Suzuki OEM 11141-93J10
• Port Side (PORT): Pro Marine 9324 - Suzuki OEM 11142-93J10

These gaskets are not interchangeable. Confirm which cylinder bank is being serviced before ordering.

Product Information

• Pro Marine Part Number: 9314
• Brand: Pro Marine Aftermarket
• Product Type: Cylinder Head Gasket
• Cylinder Bank: Starboard (STBD)
• Primary Suzuki OEM Reference: 11141-93J10
• Additional Suzuki OEM References: 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03
• Johnson Evinrude BRP References: 5034853, 5035938, 5036629
• Engine Manufacturers: Suzuki, Johnson, Evinrude
• Engine Type: V6 4-Stroke Outboard
• Suzuki Horsepower: 200 HP, 225 HP, 250 HP
• Johnson Evinrude Horsepower: 200 HP, 225 HP
• Suzuki Engine Families: DF200, DF225, DF250
• Additional Suzuki Models: DF200T, DF200Z, DF225T, DF225Z, DF250T, DF250Z and listed DF250ST configurations
• Earlier Suzuki Applications: 2004-2010
• Additional Suzuki Catalog Listings: 2013, 2015, and specified later model variants
• Matching Port Gasket: Pro Marine 9324
• Condition: New

Matching Port Side Cylinder Head Gasket Available

Servicing both cylinder heads on your Suzuki DF200, DF225, or DF250 V6 outboard? The matching port-side gasket is available separately from Pro Marine USA.

Pro Marine 9324 - PORT Cylinder Head Gasket

Matching aftermarket port-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.

Suzuki OEM: 11142-93J10
Location: Port Cylinder Bank
Sold Separately

View Matching Port Head Gasket

Verify both gasket part numbers against your engine model and serial number. The starboard and port gaskets are purchased individually.

OEM and Cross Reference Numbers

Pro Marine 9314 replaces the following Suzuki and Johnson Evinrude starboard cylinder head gasket numbers.

What This Part Is Used For

The starboard cylinder head gasket seals the connection between the starboard cylinder head and engine block on compatible Suzuki and Johnson Evinrude V6 outboards.

It helps maintain combustion chamber compression and separates the cooling water and engine oil passages at the cylinder head sealing surface.

This gasket is used during repairs involving the starboard cylinder head, including head gasket replacement, cylinder head service, and compatible V6 engine rebuilding.

Common Repair Applications

• Suzuki DF200 V6 starboard cylinder head repairs
• Suzuki DF225 V6 starboard cylinder head repairs
• Suzuki DF250 V6 starboard cylinder head repairs
• Johnson 200 HP and 225 HP 4-stroke V6 repairs
• Evinrude 200 HP and 225 HP 4-stroke V6 repairs
• Replacement of a leaking or damaged starboard head gasket
• Engine repairs requiring starboard cylinder head removal
• Compatible V6 outboard engine rebuilding

Important Fitment Note

Pro Marine 9314 is a starboard-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.

The supplied fitment includes earlier 2004-2010 Suzuki applications, additional 2013 and 2015 catalog listings, and specific later model variations identified by model suffixes and serial references.

Some DF250ST and other specialized DF250 configurations may use different cylinder head gaskets. Confirm OEM 11141-93J10 or another listed 11141-93J reference in the engine's specific parts diagram.

Do not order by horsepower alone. Verify the engine model, serial number, cylinder bank, and OEM gasket number.

Compatible Suzuki Outboard Applications

Pro Marine 9314 is listed for select Suzuki DF200, DF225, and DF250 200-250 HP V6 4-stroke outboards.

The following tables group the supplied engine fitment into readable model families while retaining the listed serial and catalog identifiers.

Suzuki DF200 - 200 HP V6 4-Stroke

Suzuki DF225 - 225 HP V6 4-Stroke

Suzuki DF250 - 250 HP V6 4-Stroke

Compatible Johnson and Evinrude Outboard Applications

Pro Marine 9314 also cross references BRP starboard head gasket numbers 5034853, 5035938, and 5036629.

The following Johnson Evinrude 200 HP and 225 HP 4-stroke models are included in the supplied fitment.

Common Symptoms of a Failed Cylinder Head Gasket

A damaged head gasket can allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

Possible symptoms include:

• Loss of cylinder compression
• Engine overheating
• Cooling water entering a combustion chamber
• Water contamination in engine oil
• Rough running or engine misfires
• Reduced engine performance
• Difficulty starting
• Combustion gases entering the cooling system
• Visible gasket damage during cylinder head removal

Installation and Service Tips

Cylinder head gasket replacement requires removal of the appropriate cylinder head and inspection of the engine's sealing surfaces. Follow the service manual for the exact engine model.

Recommended Installation Practices

• Verify the engine model and serial number.
• Confirm the starboard cylinder bank is being serviced.
• Confirm the required Suzuki or BRP OEM gasket number.
• Allow the engine to cool before disassembly.
• Remove the cylinder head according to the service manual.
• Inspect the cylinder head and engine block sealing surfaces.
• Check for warpage, corrosion, cracks, and other damage.
• Remove old gasket material without damaging the sealing surfaces.
• Keep debris out of the cylinders and internal passages.
• Install the replacement gasket in the correct orientation.
• Follow the manufacturer's specified tightening sequence and procedure.
• Replace additional seals or fasteners when required by the service manual.
• Inspect the cooling system for conditions that may have caused the original failure.
• Check engine operation and cooling performance after reassembly.

Key Features and Benefits

• Starboard-Specific Design: Intended for the starboard cylinder head on compatible V6 outboards.
• Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and BRP OEM starboard head gaskets.
• Suzuki 200-250 HP Applications: Listed for select DF200, DF225, and DF250 V6 4-stroke engines.
• Johnson Evinrude Compatibility: Listed for the specified 200 HP and 225 HP 4-stroke models.
• Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
• Combustion Chamber Sealing: Provides the gasket interface between the starboard cylinder head and engine block.
• Matching Port Gasket Available: Pro Marine 9324 is sold separately.
• Dealer Pricing Available: Qualified marine businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM numbers does Pro Marine 9314 replace?

Pro Marine 9314 cross references 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, and 11141-93J10.

What Johnson Evinrude OEM numbers does this gasket replace?

The listed BRP cross references are 5034853, 5035938, and 5036629.

Is Pro Marine 9314 the starboard or port head gasket?

Pro Marine 9314 is the starboard (STBD) cylinder head gasket. It is not the port-side gasket.

What is the matching port-side head gasket?

The matching port-side gasket is Pro Marine 9324 , which cross references Suzuki OEM 11142-93J10.

Does this gasket fit Suzuki DF200 outboards?

Yes. It is listed for select Suzuki DF200 200 HP V6 4-stroke outboards, including DF200, DF200T, and DF200Z applications.

Does this gasket fit Suzuki DF225 outboards?

Yes. It is listed for select Suzuki DF225 225 HP V6 4-stroke outboards, including DF225, DF225T, and DF225Z applications.

Does this gasket fit Suzuki DF250 outboards?

Yes. It is listed for select Suzuki DF250 250 HP V6 4-stroke outboards, including DF250, DF250T, and DF250Z applications. DF250ST applications require additional OEM verification.

Does this gasket fit Johnson and Evinrude 200 HP and 225 HP outboards?

Yes. It is listed for the specific Johnson Evinrude 200 HP and 225 HP 4-stroke model numbers shown in the compatibility table.

Are the starboard and port head gaskets interchangeable?

No. The starboard and port cylinder banks use different head gaskets. Pro Marine 9314 is for the starboard side, while Pro Marine 9324 is for the port side.

Do I need both head gaskets for a V6 engine rebuild?

If both cylinder heads are removed during an engine rebuild, each cylinder bank requires its correct replacement gasket. The starboard and port gaskets are sold separately.

What are common symptoms of a blown head gasket?

Possible symptoms include compression loss, overheating, rough running, water intrusion, and engine oil contamination. Proper diagnostic testing is required to confirm the cause.

Is Pro Marine 9314 a genuine Suzuki OEM gasket?

No. Pro Marine 9314 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 within the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
• Shipping options available through UPS, USPS, and FedEx.
• Typical delivery time is 1-5 business days.

30-Day Return Policy

• Eligible returns are accepted within 30 days.
• Parts must be new, unused, and in original packaging.
• Installed parts are not returnable.
• Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 9314 is the correct starboard cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

9314, 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, 11141-93J10, 1114193J00, 1114193J01, 1114193J02, 1114193J03, 1114193J10, 5034853, 5035938, 5036629

Searchable Terms

Pro Marine 9314, Suzuki 11141-93J00, Suzuki 11141-93J01, Suzuki 11141-93J02, Suzuki 11141-93J03, Suzuki 11141-93J10, Johnson Evinrude 5034853, Johnson Evinrude 5035938, Johnson Evinrude 5036629, Suzuki starboard head gasket, Suzuki STBD head gasket, Suzuki right cylinder head gasket, Suzuki V6 cylinder head gasket, Suzuki DF200 head gasket, Suzuki DF200T head gasket, Suzuki DF200Z head gasket, Suzuki DF225 head gasket, Suzuki DF225T head gasket, Suzuki DF225Z head gasket, Suzuki DF250 head gasket, Suzuki DF250T head gasket, Suzuki DF250Z head gasket, Suzuki 200HP head gasket, Suzuki 225HP head gasket, Suzuki 250HP head gasket, Suzuki 200-250 HP head gasket, Suzuki 4 stroke head gasket, Suzuki outboard cylinder head gasket, Johnson 200HP head gasket, Johnson 225HP head gasket, Evinrude 200HP head gasket, Evinrude 225HP head gasket, Johnson Evinrude V6 head gasket, BRP starboard head gasket, J200CX4SRS head gasket, J200PX4SRS head gasket, J225CX4SRS head gasket, J225PX4SRS head gasket, BJ200CX4SDC head gasket, BJ200X4SDC head gasket, BJ225CX4SDC head gasket, BJ225X4SDC head gasket, BJ200CX4SO head gasket, BJ200PX4SO head gasket, BJ225CX4SO head gasket, BJ225PX4SO head gasket, J200CX4SOC head gasket, J200PX4SOC head gasket, J225CX4SOC head gasket, J225CZ4SOS head gasket, J225PX4SOC head gasket, J225PZ4SOS head gasket, Suzuki outboard engine rebuild, Suzuki V6 engine repair, Suzuki cylinder head repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts, Pro Marine 9324 matching port gasket