S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Pro Marine Aftermarket Suzuki and Johnson Evinrude Engine Components
Pro Marine Cylinder Head Gasket for Suzuki DF40 DF50 and Johnson Evinrude 40-50 HP 4-Stroke Outboards
The Pro Marine 8741 Cylinder Head Gasket is an aftermarket replacement for select Suzuki DF40 and DF50 40-50 HP 4-stroke outboards from 1999-2010, along with compatible Johnson and Evinrude 40 HP and 50 HP 4-stroke outboard engines.
This replacement head gasket cross references Suzuki OEM part numbers 11141-87J00, 11141-87J01, and 11141-87J02, as well as Johnson Evinrude BRP OEM numbers 5031293 and 5034353.
Installed between the cylinder head and engine block, the gasket provides the sealing interface required to maintain combustion chamber compression while separating the engine's cooling and lubrication passages.
Pro Marine 8741 is suitable for compatible cylinder head repairs, head gasket replacement, and engine rebuilding applications. It is an aftermarket alternative to the listed genuine OEM gasket numbers.
Important: This gasket is intended for the listed Suzuki DF40 and DF50 engine families and compatible Johnson Evinrude 40-50 HP 4-stroke models. Confirm the engine model and original OEM gasket number before ordering.
Product Information
- Pro Marine Part Number: 8741
- Brand: Pro Marine Aftermarket
- Product Type: Cylinder Head Gasket
- Suzuki OEM Cross References: 11141-87J00, 11141-87J01, 11141-87J02
- Johnson Evinrude BRP Cross References: 5031293, 5034353
- Engine Manufacturers: Suzuki, Johnson, Evinrude
- Engine Type: 4-Stroke Outboard
- Horsepower: 40 HP and 50 HP
- Suzuki Engine Families: DF40, DF40QH, DF40TL, DF50, DF50QH, DF50TL
- Suzuki Model Years: 1999-2010 on Listed Applications
- Johnson Evinrude Applications: Select 40 HP and 50 HP 4-Stroke Models
- Installation Location: Between Cylinder Head and Engine Block
- Condition: New
OEM and Cross Reference Numbers
Pro Marine 8741 is an aftermarket replacement for the following Suzuki and Johnson Evinrude cylinder head gasket part numbers.
| Manufacturer | Part Number | Description |
|---|---|---|
| Pro Marine | 8741 | Aftermarket Cylinder Head Gasket |
| Suzuki OEM | 11141-87J00 | Cylinder Head Gasket Cross Reference |
| Suzuki OEM | 11141-87J01 | Cylinder Head Gasket Cross Reference |
| Suzuki OEM | 11141-87J02 | Cylinder Head Gasket Cross Reference |
| Johnson Evinrude BRP OEM | 5031293 | Cylinder Head Gasket Cross Reference |
| Johnson Evinrude BRP OEM | 5034353 | Cylinder Head Gasket Cross Reference |
These part numbers are provided to help customers identify the correct replacement when searching by original Suzuki, Johnson, Evinrude, or BRP numbers.
What This Part Is Used For
The cylinder head gasket seals the connection between the engine block and cylinder head of a 4-stroke outboard engine.
The gasket helps maintain combustion chamber pressure while separating the engine's cooling water and oil passages.
When a head gasket fails, combustion pressure or engine fluids may leak across sealing surfaces. Depending on the failure location, this can lead to compression loss, overheating, water intrusion, or other engine problems.
Common Repair Applications
- Suzuki DF40 40 HP 4-stroke cylinder head repairs
- Suzuki DF50 50 HP 4-stroke cylinder head repairs
- Johnson 40 HP 4-stroke cylinder head repairs
- Johnson 50 HP 4-stroke cylinder head repairs
- Evinrude 40 HP 4-stroke cylinder head repairs
- Evinrude 50 HP 4-stroke cylinder head repairs
- Replacement of leaking or damaged head gaskets
- Cylinder head removal and reinstallation
- Engine rebuilding and internal engine repairs
Important Fitment Note
Pro Marine 8741 is intended for the earlier Suzuki DF40 and DF50 4-stroke engine families, along with the listed Johnson Evinrude 40-50 HP 4-stroke models.
The Suzuki applications supplied for this gasket cover 1999-2010, depending on the engine model.
This gasket should not be confused with head gaskets used on the later Suzuki DF40A, DF50A, and DF60A engine families.
Suzuki DF40 and DF50 engines are not the same application family as DF40A and DF50A engines. The correct gasket must be selected using the OEM part number and engine identification.
For Johnson and Evinrude applications, verify the exact model number and corresponding BRP OEM gasket number. Not every Johnson or Evinrude 40-50 HP outboard uses this gasket.
Compatible Outboard Applications
Pro Marine 8741 is listed for select Suzuki DF40 and DF50 outboards and compatible Johnson Evinrude 40 HP and 50 HP 4-stroke engines.
Suzuki DF40 and DF50 4-Stroke Outboards
The following table summarizes the supplied Suzuki fitment by engine family and model year range.
| Suzuki Model | Horsepower | Compatible Years | Engine Type |
|---|---|---|---|
| DF40 | 40 HP | 1999-2010 | 4-Stroke |
| DF40QH | 40 HP | 1999-2007 | 4-Stroke |
| DF40TL | 40 HP | 1999-2007 | 4-Stroke |
| DF50 | 50 HP | 1999-2010 | 4-Stroke |
| DF50QH | 50 HP | 1999-2007 | 4-Stroke |
| DF50TL | 50 HP | 1999-2007 | 4-Stroke |
Johnson and Evinrude 40 HP and 50 HP 4-Stroke Outboards
This gasket also cross references BRP OEM numbers 5031293 and 5034353 and is listed for the following Johnson and Evinrude 4-stroke outboard models.
| Brand | Horsepower | Model Numbers | Application Details |
|---|---|---|---|
| Johnson | 40 HP |
BJ40PL4SDR BJ40PL4SOC BJ40PL4SRS J40PL4SDE J40PL4SNF J40PL4SOB J40PL4SRM J40PL4STC |
4-stroke applications. J40PL4SNF is listed as a 2002 remote-control, 20-inch shaft model with power trim and tilt. |
| Johnson | 50 HP |
BJ50PL4SDR BJ50PL4SOC BJ50PL4SRS J50PL4SDE J50PL4SNF J50PL4SOB J50PL4SRM J50PL4STC |
4-stroke applications. J50PL4SNF is listed as a 2002 remote-control, 20-inch shaft model with power trim and tilt. |
| Evinrude | 40 HP |
E40PL4EES E40PL4SIR E40PL4SSC |
E40PL4EES - 1999 E40PL4SSC - 2000 E40PL4SIR - 2001 4-stroke applications. SIR and SSC models are listed with electric start, power trim and tilt, and 20-inch shaft. |
| Evinrude | 50 HP |
E50PL4EES E50PL4SIR E50PL4SSC |
E50PL4EES - 1999 E50PL4SSC - 2000 E50PL4SIR - 2001 4-stroke applications. SIR and SSC models are listed with electric start, power trim and tilt, and 20-inch shaft. |
Understanding Suzuki and Johnson Evinrude Fitment
Suzuki DF40: 40 HP 4-stroke outboard engine family listed from 1999-2010.
Suzuki DF50: 50 HP 4-stroke outboard engine family listed from 1999-2010.
QH and TL Models: Additional Suzuki DF40 and DF50 configurations listed from 1999-2007.
Johnson and Evinrude: Select 40 HP and 50 HP 4-stroke outboard engines using the listed BRP OEM gasket numbers.
Important: Confirm the exact model number and original gasket reference before ordering.
Common Symptoms of a Failed Head Gasket
A damaged head gasket can allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.
The following conditions may indicate a cylinder head gasket problem.
- Loss of cylinder compression
- Engine overheating
- Cooling water entering a combustion chamber
- Water contamination in engine oil
- Rough running or misfiring
- Reduced engine performance
- Difficulty starting
- Combustion gases entering the cooling system
- Visible gasket damage during engine disassembly
These symptoms can also be caused by other engine problems. Perform appropriate diagnostic testing before determining that the head gasket requires replacement.
Installation and Service Tips
Replacing a cylinder head gasket requires removal of the cylinder head and inspection of the engine's sealing surfaces. Follow the applicable Suzuki or Johnson Evinrude service manual.
Recommended Installation Practices
- Confirm the original OEM gasket number.
- Verify the engine model and applicable year.
- Allow the engine to cool before disassembly.
- Remove the cylinder head following the service manual.
- Inspect the cylinder head and block sealing surfaces.
- Check for warpage, corrosion, cracks, or damage.
- Remove old gasket material without damaging sealing surfaces.
- Keep debris out of the cylinders and internal passages.
- Install the replacement gasket in the correct orientation.
- Follow the specified cylinder head fastener tightening sequence.
- Use the required fastener tightening specifications.
- Replace other gaskets and seals when required by the repair procedure.
- Inspect the cooling system for conditions that may have caused the original failure.
- Check engine operation and cooling performance after reassembly.
Important Cylinder Head Installation Warning
Correct gasket installation requires proper surface preparation, cylinder head inspection, and the correct fastener tightening procedure.
Do not install a new head gasket over warped, cracked, or improperly prepared sealing surfaces. Improper installation can result in compression loss, cooling water leakage, overheating, and engine damage.
Key Features and Benefits
- Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and Johnson Evinrude OEM head gaskets.
- Suzuki 40-50 HP Applications: Listed for DF40 and DF50 4-stroke outboards from 1999-2010.
- Johnson Evinrude Compatibility: Fits the specified 40 HP and 50 HP 4-stroke model applications.
- Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
- Combustion Chamber Sealing: Provides the gasket interface between the cylinder head and engine block.
- Cooling and Lubrication Passage Sealing: Helps maintain separation between internal engine passages.
- Multiple OEM Cross References: Search using Suzuki 11141-87J00, 11141-87J01, 11141-87J02, or BRP 5031293 and 5034353.
- Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.
Frequently Asked Questions
What Suzuki OEM numbers does Pro Marine 8741 replace?
Pro Marine 8741 cross references 11141-87J00, 11141-87J01, and 11141-87J02.
What Johnson Evinrude OEM numbers does this gasket replace?
This gasket cross references 5031293 and 5034353.
Does this head gasket fit Suzuki DF40 outboards?
Yes. It is listed for Suzuki DF40 40 HP 4-stroke outboards from 1999-2010, along with DF40QH and DF40TL variants from 1999-2007.
Does this head gasket fit Suzuki DF50 outboards?
Yes. It is listed for Suzuki DF50 50 HP 4-stroke outboards from 1999-2010, along with DF50QH and DF50TL variants from 1999-2007.
Does this gasket fit Johnson 40 HP and 50 HP outboards?
Yes. The supplied fitment includes select Johnson 40 HP and 50 HP 4-stroke engines, including the listed J40, J50, BJ40, and BJ50 model numbers.
Does this gasket fit Evinrude 40 HP and 50 HP outboards?
Yes. It is listed for select Evinrude 40 HP and 50 HP 4-stroke engines, including E40PL4EES, E40PL4SIR, E40PL4SSC, E50PL4EES, E50PL4SIR, and E50PL4SSC.
Will this gasket fit Suzuki DF40A or DF50A outboards?
This gasket is listed for the earlier DF40 and DF50 engine families, not the later DF40A and DF50A applications. Always confirm the OEM gasket number before ordering.
What is the difference between Suzuki DF40 and DF40A head gaskets?
Suzuki DF40 and DF40A engines belong to different application families and may use different cylinder head gaskets. Pro Marine 8741 cross references Suzuki 11141-87J00, 11141-87J01, and 11141-87J02. Select the gasket that matches the engine's OEM parts diagram.
What does a cylinder head gasket do?
The cylinder head gasket seals the joint between the engine block and cylinder head, helping maintain compression and separation between combustion, cooling, and lubrication passages.
What are symptoms of a blown head gasket?
Possible symptoms include compression loss, overheating, rough running, water intrusion, and contamination of engine oil. Proper diagnostic testing is required to confirm the cause.
Should I replace the head gasket after removing the cylinder head?
Yes. Install a new compatible cylinder head gasket when reassembling the engine after cylinder head removal.
Is Pro Marine 8741 a genuine Suzuki or BRP OEM gasket?
No. Pro Marine 8741 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.
Can I install this head gasket myself?
Cylinder head gasket replacement requires engine disassembly, inspection of sealing surfaces, and proper fastener tightening. Professional installation is recommended.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning merchandise.
Need Help Confirming Head Gasket Fitment?
If you are unsure whether Pro Marine 8741 is the correct cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
8741, 11141-87J00, 11141-87J01, 11141-87J02, 1114187J00, 1114187J01, 1114187J02, 5031293, 5034353
Searchable Terms
Pro Marine 8741, Suzuki 11141-87J00, Suzuki 11141-87J01, Suzuki 11141-87J02, Johnson Evinrude 5031293, Johnson Evinrude 5034353, Suzuki head gasket, Suzuki cylinder head gasket, Suzuki DF40 head gasket, Suzuki DF50 head gasket, Suzuki DF40QH head gasket, Suzuki DF40TL head gasket, Suzuki DF50QH head gasket, Suzuki DF50TL head gasket, Suzuki 40HP head gasket, Suzuki 50HP head gasket, Suzuki 4 stroke head gasket, Suzuki 1999 head gasket, Suzuki 2000 head gasket, Suzuki 2001 head gasket, Suzuki 2002 head gasket, Suzuki 2003 head gasket, Suzuki 2004 head gasket, Suzuki 2005 head gasket, Suzuki 2006 head gasket, Suzuki 2007 head gasket, Suzuki 2008 head gasket, Suzuki 2009 head gasket, Suzuki 2010 head gasket, Johnson 40HP head gasket, Johnson 50HP head gasket, Evinrude 40HP head gasket, Evinrude 50HP head gasket, Johnson 4 stroke head gasket, Evinrude 4 stroke head gasket, Johnson Evinrude cylinder head gasket, BRP head gasket, J40PL4SNF head gasket, J50PL4SNF head gasket, E40PL4EES head gasket, E40PL4SIR head gasket, E40PL4SSC head gasket, E50PL4EES head gasket, E50PL4SIR head gasket, E50PL4SSC head gasket, Suzuki outboard engine repair, Suzuki cylinder head repair, Suzuki engine rebuild parts, Johnson Evinrude engine rebuild parts, aftermarket Suzuki head gasket, aftermarket Johnson Evinrude head gasket, Pro Marine Suzuki engine parts
11141-87J01
11141-87J02
5031293
5034353
Pro Marine Aftermarket Suzuki and Johnson Evinrude V6 Engine Components
Pro Marine Port Cylinder Head Gasket for Suzuki DF200 DF225 DF250 V6 4-Stroke Outboards
The Pro Marine 9324 Port Cylinder Head Gasket is an aftermarket replacement for the port cylinder head on select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards. Applications include 200 HP, 225 HP, and 250 HP Suzuki engines, along with specified Johnson and Evinrude 200 HP and 225 HP 4-stroke outboards.
This gasket cross references Suzuki OEM 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03, and 11142-93J10, along with Johnson Evinrude BRP OEM numbers 5034854, 5035971, and 5036630.
Installed between the port cylinder head and engine block, the head gasket helps maintain combustion chamber compression while sealing the engine's cooling water and lubrication passages.
Compatible applications include select Suzuki DF200, DF225, and DF250 engines from 2004-2010, additional 2013 and 2015 catalog applications, and later serial-specific model configurations.
Important: This is the PORT SIDE ONLY. The matching starboard-side cylinder head gasket is sold separately as Pro Marine 9314 .
Important: Port and Starboard Head Gaskets Are Different
Compatible Suzuki DF200, DF225, and DF250 V6 outboards use separate cylinder head gaskets for the port and starboard cylinder banks.
- Port Side (PORT): Pro Marine 9324 - Suzuki OEM 11142-93J10
- Starboard Side (STBD): Pro Marine 9314 - Suzuki OEM 11141-93J10
These gaskets are not interchangeable. Verify which cylinder bank is being serviced before ordering.
Product Information
- Pro Marine Part Number: 9324
- Brand: Pro Marine Aftermarket
- Product Type: Cylinder Head Gasket
- Cylinder Bank: Port (PORT)
- Primary Suzuki OEM Reference: 11142-93J10
- Additional Suzuki OEM References: 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03
- Johnson Evinrude BRP References: 5034854, 5035971, 5036630
- Engine Manufacturers: Suzuki, Johnson, Evinrude
- Engine Type: V6 4-Stroke Outboard
- Suzuki Horsepower: 200 HP, 225 HP, 250 HP
- Johnson Evinrude Horsepower: 200 HP, 225 HP
- Suzuki Engine Families: DF200, DF225, DF250
- Additional Suzuki Variations: DF200T, DF200Z, DF225T, DF225Z, DF250T, DF250Z and listed DF250ST configurations
- Earlier Suzuki Applications: 2004-2010
- Additional Catalog Listings: 2013, 2015, and specified later configurations
- Matching Starboard Gasket: Pro Marine 9314
- Condition: New
Matching Starboard Side Cylinder Head Gasket Available
Servicing both cylinder heads on your Suzuki DF200, DF225, or DF250 V6 outboard? The matching starboard-side gasket is available separately from Pro Marine USA.
Pro Marine 9314 - STBD Cylinder Head Gasket
Matching aftermarket starboard-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.
Suzuki OEM: 11141-93J10
Location: Starboard Cylinder Bank
Sold Separately
OEM and Cross Reference Numbers
Pro Marine 9324 replaces the following Suzuki and Johnson Evinrude port cylinder head gasket numbers.
| Manufacturer | Part Number | Description |
|---|---|---|
| Pro Marine | 9324 | Aftermarket Port Cylinder Head Gasket |
| Suzuki OEM | 11142-93J00 | Port Head Gasket Cross Reference |
| Suzuki OEM | 11142-93J01 | Port Head Gasket Cross Reference |
| Suzuki OEM | 11142-93J02 | Port Head Gasket Cross Reference |
| Suzuki OEM | 11142-93J03 | Port Head Gasket Cross Reference |
| Suzuki OEM | 11142-93J10 | Port Head Gasket Cross Reference |
| Johnson Evinrude BRP | 5034854 | Port Head Gasket Cross Reference |
| Johnson Evinrude BRP | 5035971 | Port Head Gasket Cross Reference |
| Johnson Evinrude BRP | 5036630 | Port Head Gasket Cross Reference |
What This Part Is Used For
The port cylinder head gasket seals the connection between the port cylinder head and engine block on compatible Suzuki and Johnson Evinrude V6 outboards.
Its purpose is to maintain combustion chamber compression while separating the engine's cooling water and lubrication passages.
This gasket is used during repairs involving the port cylinder head, including head gasket replacement, cylinder head service, and compatible V6 engine rebuilding.
Common Repair Applications
- Suzuki DF200 V6 port cylinder head repairs
- Suzuki DF225 V6 port cylinder head repairs
- Suzuki DF250 V6 port cylinder head repairs
- Johnson 200 HP and 225 HP 4-stroke V6 repairs
- Evinrude 200 HP and 225 HP 4-stroke V6 repairs
- Replacement of a leaking or damaged port head gasket
- Engine repairs requiring port cylinder head removal
- Compatible V6 outboard engine rebuilding
Important Fitment Note
Pro Marine 9324 is a PORT-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.
The supplied fitment includes earlier 2004-2010 Suzuki applications, additional 2013 and 2015 catalog listings, and specific later model variations identified by serial references.
Certain specialized DF250 configurations, including DF250ST applications, may require additional OEM verification. Confirm the exact port-side gasket number in the engine's parts diagram.
Do not order by horsepower alone. Verify the engine model, serial number, cylinder bank, and OEM gasket number.
Compatible Suzuki Outboard Applications
Pro Marine 9324 is listed for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboard engines.
The following tables organize the supplied model and serial information into readable engine families.
Suzuki DF200 - 200 HP V6 4-Stroke
| Engine Model | Listed Applications | Serial References |
|---|---|---|
| DF200 |
2004-2010 2013 and 2015 listings Additional serial-specific applications |
-51001 20002F-210001 20002F-310001 20002Z-210001 20002Z-310001 22503F-210001 22503F-310001 22503Z-210001 22503Z-310001 25003F-210001 25003F-310001 25003Z-210001 25003Z-310001 25004F-210001 25004F-310001 710001 |
| DF200T |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial reference |
20002F-440001 20002F-540001 20002F-640001 |
| DF200Z |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial reference |
20002Z-440001 20002Z-540001 20002Z-640001 |
Suzuki DF225 - 225 HP V6 4-Stroke
| Engine Model | Listed Applications | Serial References |
|---|---|---|
| DF225 |
2004-2010 2013 and 2015 listings Additional serial-specific applications |
-51001 20002F-210001 20002F-310001 20002Z-210001 20002Z-310001 22503F-210001 22503F-310001 22503Z-210001 22503Z-310001 25003F-210001 25003F-310001 25003Z-210001 25003Z-310001 25004F-210001 25004F-310001 710001 |
| DF225T |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
22503F-040001 22503F-440001 22503F-540001 22503F-640001 |
| DF225Z |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
22503Z-040001 22503Z-440001 22503Z-540001 22503Z-640001 |
Suzuki DF250 - 250 HP V6 4-Stroke
| Engine Model | Listed Applications | Serial References |
|---|---|---|
| DF250 |
2004-2010 2013 and 2015 listings Additional serial-specific applications |
-51001 20002F-210001 20002F-310001 20002Z-210001 20002Z-310001 22503F-210001 22503F-310001 22503Z-210001 22503Z-310001 25003F-210001 25003F-310001 25003Z-210001 25003Z-310001 25004F-210001 25004F-310001 710001 |
| DF250T |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
25003F-040001 25003F-440001 25003F-540001 25003F-640001 |
| DF250Z |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
25003Z-040001 25003Z-440001 25003Z-540001 25003Z-640001 |
| DF250ST |
Catalog variants 020, 021, 022, 024, 025 OEM verification required |
25004F-040001 25004F-440001 25004F-540001 25004F-640001 |
Additional Suzuki Catalog Model Identifiers
The supplied fitment includes the following model-specific catalog identifiers:
- DF200T: 020, 021, 022, 024, 025
- DF200Z: 020, 021, 022, 024, 025
- DF225T: 020, 021, 022, 024, 025
- DF225Z: 020, 021, 022, 024, 025
- DF250T: 020, 021, 022, 024, 025
- DF250Z: 020, 021, 022, 024, 025
- DF250ST: 020, 021, 022, 024, 025 - verify OEM gasket number
Compatible Johnson and Evinrude Outboard Applications
Pro Marine 9324 also cross references BRP port head gasket numbers 5034854, 5035971, and 5036630.
The following Johnson Evinrude 200 HP and 225 HP 4-stroke models are included in the supplied fitment.
| Engine Family | Horsepower | Compatible Model Numbers |
|---|---|---|
| J200 | 200 HP |
J200CX4SRS J200PX4SRS J200CX4SOC J200PX4SOC |
| BJ200 | 200 HP |
BJ200CX4SDC BJ200X4SDC BJ200CX4SO BJ200PX4SO |
| J225 | 225 HP |
J225CX4SRS J225PX4SRS J225CX4SOC J225CZ4SOS J225PX4SOC J225PZ4SOS |
| BJ225 | 225 HP |
BJ225CX4SDC BJ225X4SDC BJ225CX4SO BJ225PX4SO |
Johnson Evinrude Fitment Information
The listed J200, BJ200, J225, and BJ225 model numbers are specific 4-stroke applications. Confirm the complete engine model and required BRP OEM port-side gasket number before ordering.
Common Symptoms of a Failed Cylinder Head Gasket
A damaged head gasket may allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.
Possible symptoms include:
- Loss of cylinder compression
- Engine overheating
- Cooling water entering a combustion chamber
- Water contamination in engine oil
- Rough running or engine misfires
- Reduced engine performance
- Difficulty starting
- Combustion gases entering the cooling system
- Visible gasket damage during cylinder head removal
These symptoms can also be caused by other engine problems. Perform appropriate diagnostic testing before determining that the head gasket requires replacement.
Installation and Service Tips
Cylinder head gasket replacement requires removal of the appropriate cylinder head and inspection of the engine's sealing surfaces. Follow the service manual for the exact engine model.
Recommended Installation Practices
- Verify the engine model and serial number.
- Confirm the port cylinder bank is being serviced.
- Confirm the required Suzuki or BRP OEM gasket number.
- Allow the engine to cool before disassembly.
- Remove the cylinder head according to the service manual.
- Inspect the cylinder head and engine block sealing surfaces.
- Check for warpage, corrosion, cracks, and other damage.
- Remove old gasket material without damaging the sealing surfaces.
- Keep debris out of cylinders and internal passages.
- Install the replacement gasket in the correct orientation.
- Follow the manufacturer's specified tightening sequence and procedure.
- Replace additional seals or fasteners when required by the service manual.
- Inspect the cooling system for conditions that may have caused the original failure.
- Check engine operation and cooling performance after reassembly.
Important Cylinder Head Installation Warning
Proper gasket installation requires correct surface preparation, cylinder head inspection, and the appropriate fastener tightening procedure.
Do not install a new head gasket over warped, cracked, or improperly prepared sealing surfaces. Improper installation can cause compression loss, cooling water leakage, overheating, and engine damage.
Key Features and Benefits
- Port-Specific Design: Intended for the port cylinder head on compatible V6 outboards.
- Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and BRP OEM port head gaskets.
- Suzuki 200-250 HP Applications: Listed for select DF200, DF225, and DF250 V6 4-stroke engines.
- Johnson Evinrude Compatibility: Listed for the specified 200 HP and 225 HP 4-stroke models.
- Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
- Combustion Chamber Sealing: Provides the gasket interface between the port cylinder head and engine block.
- Matching Starboard Gasket Available: Pro Marine 9314 is sold separately.
- Dealer Pricing Available: Qualified marine businesses can apply for wholesale pricing.
Frequently Asked Questions
Is Pro Marine 9324 the port or starboard head gasket?
Pro Marine 9324 is the port-side cylinder head gasket. The matching starboard gasket is Pro Marine 9314.
What Suzuki OEM numbers does Pro Marine 9324 replace?
It cross references 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03, and 11142-93J10.
What Johnson Evinrude OEM numbers does this gasket replace?
The listed BRP cross references are 5034854, 5035971, and 5036630.
What is the matching starboard head gasket?
The matching starboard gasket is Pro Marine 9314 , which cross references Suzuki OEM 11141-93J10.
Does this gasket fit Suzuki DF200 outboards?
Yes. It is listed for select Suzuki DF200 200 HP V6 4-stroke outboards, including DF200, DF200T, and DF200Z applications.
Does this gasket fit Suzuki DF225 outboards?
Yes. It is listed for select Suzuki DF225 225 HP V6 4-stroke outboards, including DF225, DF225T, and DF225Z applications.
Does this gasket fit Suzuki DF250 outboards?
Yes. It is listed for select Suzuki DF250 250 HP V6 4-stroke outboards, including DF250, DF250T, and DF250Z applications. DF250ST applications should be confirmed against the OEM diagram.
Does this gasket fit Johnson and Evinrude 200 HP and 225 HP outboards?
Yes. It is listed for the specific Johnson Evinrude 200 HP and 225 HP 4-stroke model numbers shown in the compatibility table.
Can I use the port gasket on the starboard side?
No. The port and starboard cylinder banks require their corresponding head gaskets. Pro Marine 9324 is for the port side only.
Do I need both head gaskets for a V6 engine rebuild?
If both cylinder heads are removed, each cylinder bank requires its correct replacement gasket. The port and starboard gaskets are sold separately.
Is Pro Marine 9324 a genuine Suzuki OEM gasket?
No. Pro Marine 9324 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning merchandise.
Need Help Confirming Head Gasket Fitment?
If you are unsure whether Pro Marine 9324 is the correct port cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
9324, 11142-93J00, 11142-93J01, 11142-93J02, 11142-93J03, 11142-93J10, 1114293J00, 1114293J01, 1114293J02, 1114293J03, 1114293J10, 5034854, 5035971, 5036630
Searchable Terms
Pro Marine 9324, Suzuki 11142-93J00, Suzuki 11142-93J01, Suzuki 11142-93J02, Suzuki 11142-93J03, Suzuki 11142-93J10, Johnson Evinrude 5034854, Johnson Evinrude 5035971, Johnson Evinrude 5036630, Suzuki port head gasket, Suzuki PORT head gasket, Suzuki left cylinder head gasket, Suzuki V6 cylinder head gasket, Suzuki DF200 port head gasket, Suzuki DF200T port head gasket, Suzuki DF200Z port head gasket, Suzuki DF225 port head gasket, Suzuki DF225T port head gasket, Suzuki DF225Z port head gasket, Suzuki DF250 port head gasket, Suzuki DF250T port head gasket, Suzuki DF250Z port head gasket, Suzuki 200HP head gasket, Suzuki 225HP head gasket, Suzuki 250HP head gasket, Suzuki 200-250 HP head gasket, Suzuki 4 stroke port head gasket, Suzuki outboard cylinder head gasket, Johnson 200HP port head gasket, Johnson 225HP port head gasket, Evinrude 200HP port head gasket, Evinrude 225HP port head gasket, Johnson Evinrude V6 head gasket, BRP port head gasket, J200CX4SRS head gasket, J200PX4SRS head gasket, J225CX4SRS head gasket, J225PX4SRS head gasket, BJ200CX4SDC head gasket, BJ200X4SDC head gasket, BJ225CX4SDC head gasket, BJ225X4SDC head gasket, BJ200CX4SO head gasket, BJ200PX4SO head gasket, BJ225CX4SO head gasket, BJ225PX4SO head gasket, J200CX4SOC head gasket, J200PX4SOC head gasket, J225CX4SOC head gasket, J225CZ4SOS head gasket, J225PX4SOC head gasket, J225PZ4SOS head gasket, Suzuki V6 engine rebuild, Suzuki cylinder head repair, Suzuki outboard engine repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts, Pro Marine 9314 matching starboard gasket
11142-93J01
11142-93J02
11142-93J03
11142-93J10
5034854
5035971
5036630
Pro Marine Aftermarket Suzuki and Johnson Evinrude V6 Engine Components
Pro Marine Starboard Cylinder Head Gasket for Suzuki DF200 DF225 DF250 V6 4-Stroke Outboards
The Pro Marine 9314 Starboard Cylinder Head Gasket is an aftermarket replacement for the starboard (STBD) cylinder head on select Suzuki DF200, DF225, and DF250 200-250 HP V6 4-stroke outboard engines.
This gasket also fits the specified Johnson and Evinrude 200 HP and 225 HP 4-stroke V6 outboards listed in the compatibility tables below.
Pro Marine 9314 cross references Suzuki OEM 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, and 11141-93J10, along with BRP OEM 5034853, 5035938, and 5036629.
The gasket seals the starboard cylinder head to the engine block, helping maintain combustion chamber compression while separating cooling water and engine lubrication passages.
Important: This is the STARBOARD SIDE ONLY. The matching port-side cylinder head gasket is sold separately as Pro Marine 9324 .
Important: Starboard and Port Head Gaskets Are Different
Suzuki DF200, DF225, and DF250 V6 engines use separate cylinder head gaskets for the starboard and port cylinder banks.
- Starboard Side (STBD): Pro Marine 9314 - Suzuki OEM 11141-93J10
- Port Side (PORT): Pro Marine 9324 - Suzuki OEM 11142-93J10
These gaskets are not interchangeable. Confirm which cylinder bank is being serviced before ordering.
Product Information
- Pro Marine Part Number: 9314
- Brand: Pro Marine Aftermarket
- Product Type: Cylinder Head Gasket
- Cylinder Bank: Starboard (STBD)
- Primary Suzuki OEM Reference: 11141-93J10
- Additional Suzuki OEM References: 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03
- Johnson Evinrude BRP References: 5034853, 5035938, 5036629
- Engine Manufacturers: Suzuki, Johnson, Evinrude
- Engine Type: V6 4-Stroke Outboard
- Suzuki Horsepower: 200 HP, 225 HP, 250 HP
- Johnson Evinrude Horsepower: 200 HP, 225 HP
- Suzuki Engine Families: DF200, DF225, DF250
- Additional Suzuki Models: DF200T, DF200Z, DF225T, DF225Z, DF250T, DF250Z and listed DF250ST configurations
- Earlier Suzuki Applications: 2004-2010
- Additional Suzuki Catalog Listings: 2013, 2015, and specified later model variants
- Matching Port Gasket: Pro Marine 9324
- Condition: New
Matching Port Side Cylinder Head Gasket Available
Servicing both cylinder heads on your Suzuki DF200, DF225, or DF250 V6 outboard? The matching port-side gasket is available separately from Pro Marine USA.
Pro Marine 9324 - PORT Cylinder Head Gasket
Matching aftermarket port-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.
Suzuki OEM: 11142-93J10
Location: Port Cylinder Bank
Sold Separately
Verify both gasket part numbers against your engine model and serial number. The starboard and port gaskets are purchased individually.
OEM and Cross Reference Numbers
Pro Marine 9314 replaces the following Suzuki and Johnson Evinrude starboard cylinder head gasket numbers.
| Manufacturer | Part Number | Description |
|---|---|---|
| Pro Marine | 9314 | Aftermarket Starboard Head Gasket |
| Suzuki OEM | 11141-93J00 | STBD Cylinder Head Gasket Reference |
| Suzuki OEM | 11141-93J01 | STBD Cylinder Head Gasket Reference |
| Suzuki OEM | 11141-93J02 | STBD Cylinder Head Gasket Reference |
| Suzuki OEM | 11141-93J03 | STBD Cylinder Head Gasket Reference |
| Suzuki OEM | 11141-93J10 | STBD Cylinder Head Gasket Reference |
| Johnson Evinrude BRP | 5034853 | Starboard Head Gasket Cross Reference |
| Johnson Evinrude BRP | 5035938 | Starboard Head Gasket Cross Reference |
| Johnson Evinrude BRP | 5036629 | Starboard Head Gasket Cross Reference |
What This Part Is Used For
The starboard cylinder head gasket seals the connection between the starboard cylinder head and engine block on compatible Suzuki and Johnson Evinrude V6 outboards.
It helps maintain combustion chamber compression and separates the cooling water and engine oil passages at the cylinder head sealing surface.
This gasket is used during repairs involving the starboard cylinder head, including head gasket replacement, cylinder head service, and compatible V6 engine rebuilding.
Common Repair Applications
- Suzuki DF200 V6 starboard cylinder head repairs
- Suzuki DF225 V6 starboard cylinder head repairs
- Suzuki DF250 V6 starboard cylinder head repairs
- Johnson 200 HP and 225 HP 4-stroke V6 repairs
- Evinrude 200 HP and 225 HP 4-stroke V6 repairs
- Replacement of a leaking or damaged starboard head gasket
- Engine repairs requiring starboard cylinder head removal
- Compatible V6 outboard engine rebuilding
Important Fitment Note
Pro Marine 9314 is a starboard-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.
The supplied fitment includes earlier 2004-2010 Suzuki applications, additional 2013 and 2015 catalog listings, and specific later model variations identified by model suffixes and serial references.
Some DF250ST and other specialized DF250 configurations may use different cylinder head gaskets. Confirm OEM 11141-93J10 or another listed 11141-93J reference in the engine's specific parts diagram.
Do not order by horsepower alone. Verify the engine model, serial number, cylinder bank, and OEM gasket number.
Compatible Suzuki Outboard Applications
Pro Marine 9314 is listed for select Suzuki DF200, DF225, and DF250 200-250 HP V6 4-stroke outboards.
The following tables group the supplied engine fitment into readable model families while retaining the listed serial and catalog identifiers.
Suzuki DF200 - 200 HP V6 4-Stroke
| Engine Model | Listed Applications | Serial References |
|---|---|---|
| DF200 |
2004-2010 2013 and 2015 listings Additional serial-specific applications |
-51001 20002F-210001 20002F-310001 20002Z-210001 20002Z-310001 22503F-210001 22503F-310001 22503Z-210001 22503Z-310001 25003F-210001 25003F-310001 25003Z-210001 25003Z-310001 25004F-210001 25004F-310001 710001 |
| DF200T |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial reference |
20002F-440001 20002F-540001 20002F-640001 |
| DF200Z |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial reference |
20002Z-440001 20002Z-540001 20002Z-640001 |
Suzuki DF225 - 225 HP V6 4-Stroke
| Engine Model | Listed Applications | Serial References |
|---|---|---|
| DF225 |
2004-2010 2013 and 2015 listings Additional serial-specific applications |
-51001 20002F-210001 20002F-310001 20002Z-210001 20002Z-310001 22503F-210001 22503F-310001 22503Z-210001 22503Z-310001 25003F-210001 25003F-310001 25003Z-210001 25003Z-310001 25004F-210001 25004F-310001 710001 |
| DF225T |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
22503F-040001 22503F-440001 22503F-540001 22503F-640001 |
| DF225Z |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
22503Z-040001 22503Z-440001 22503Z-540001 22503Z-640001 |
Suzuki DF250 - 250 HP V6 4-Stroke
| Engine Model | Listed Applications | Serial References |
|---|---|---|
| DF250 |
2004-2010 2013 and 2015 listings Additional serial-specific applications |
-51001 20002F-210001 20002F-310001 20002Z-210001 20002Z-310001 22503F-210001 22503F-310001 22503Z-210001 22503Z-310001 25003F-210001 25003F-310001 25003Z-210001 25003Z-310001 25004F-210001 25004F-310001 710001 |
| DF250T |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
25003F-040001 25003F-440001 25003F-540001 25003F-640001 |
| DF250Z |
2004-2007 Catalog variants 020, 021, 022, 024, 025 Additional listed serial references |
25003Z-040001 25003Z-440001 25003Z-540001 25003Z-640001 |
| DF250ST |
Catalog variants 020, 021, 022, 024, 025 Additional listed serial references OEM verification required |
25004F-040001 25004F-440001 25004F-540001 25004F-640001 |
DF250ST applications appear in the supplied catalog fitment, but certain DF250S/SS configurations use a different starboard head gasket, Suzuki OEM 11141-98J10. Verify the exact OEM gasket number before purchasing Pro Marine 9314.
Additional Suzuki Catalog Model Identifiers
The supplied fitment includes the following model-specific catalog identifiers:
- DF200T: 020, 021, 022, 024, 025
- DF200Z: 020, 021, 022, 024, 025
- DF225T: 020, 021, 022, 024, 025
- DF225Z: 020, 021, 022, 024, 025
- DF250T: 020, 021, 022, 024, 025
- DF250Z: 020, 021, 022, 024, 025
- DF250ST: 020, 021, 022, 024, 025 - verify OEM gasket number
These identifiers help distinguish catalog applications. They do not establish compatibility with every engine in a horsepower family.
Compatible Johnson and Evinrude Outboard Applications
Pro Marine 9314 also cross references BRP starboard head gasket numbers 5034853, 5035938, and 5036629.
The following Johnson Evinrude 200 HP and 225 HP 4-stroke models are included in the supplied fitment.
| Engine Family | Horsepower | Compatible Model Numbers |
|---|---|---|
| J200 | 200 HP |
J200CX4SRS J200PX4SRS J200CX4SOC J200PX4SOC |
| BJ200 | 200 HP |
BJ200CX4SDC BJ200X4SDC BJ200CX4SO BJ200PX4SO |
| J225 | 225 HP |
J225CX4SRS J225PX4SRS J225CX4SOC J225CZ4SOS J225PX4SOC J225PZ4SOS |
| BJ225 | 225 HP |
BJ225CX4SDC BJ225X4SDC BJ225CX4SO BJ225PX4SO |
Johnson Evinrude Fitment Information
The listed J200, BJ200, J225, and BJ225 models are specific Johnson Evinrude 4-stroke applications.
Confirm the complete engine model and the required BRP OEM starboard head gasket number before ordering.
Common Symptoms of a Failed Cylinder Head Gasket
A damaged head gasket can allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.
Possible symptoms include:
- Loss of cylinder compression
- Engine overheating
- Cooling water entering a combustion chamber
- Water contamination in engine oil
- Rough running or engine misfires
- Reduced engine performance
- Difficulty starting
- Combustion gases entering the cooling system
- Visible gasket damage during cylinder head removal
These symptoms can also be caused by other engine problems. Perform appropriate diagnostic testing before determining that the head gasket requires replacement.
Installation and Service Tips
Cylinder head gasket replacement requires removal of the appropriate cylinder head and inspection of the engine's sealing surfaces. Follow the service manual for the exact engine model.
Recommended Installation Practices
- Verify the engine model and serial number.
- Confirm the starboard cylinder bank is being serviced.
- Confirm the required Suzuki or BRP OEM gasket number.
- Allow the engine to cool before disassembly.
- Remove the cylinder head according to the service manual.
- Inspect the cylinder head and engine block sealing surfaces.
- Check for warpage, corrosion, cracks, and other damage.
- Remove old gasket material without damaging the sealing surfaces.
- Keep debris out of the cylinders and internal passages.
- Install the replacement gasket in the correct orientation.
- Follow the manufacturer's specified tightening sequence and procedure.
- Replace additional seals or fasteners when required by the service manual.
- Inspect the cooling system for conditions that may have caused the original failure.
- Check engine operation and cooling performance after reassembly.
Important Cylinder Head Installation Warning
Proper gasket installation requires correct surface preparation, cylinder head inspection, and the appropriate fastener tightening procedure.
Do not install a new head gasket over warped, cracked, or improperly prepared sealing surfaces. Improper installation can cause compression loss, cooling water leakage, overheating, and engine damage.
Key Features and Benefits
- Starboard-Specific Design: Intended for the starboard cylinder head on compatible V6 outboards.
- Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and BRP OEM starboard head gaskets.
- Suzuki 200-250 HP Applications: Listed for select DF200, DF225, and DF250 V6 4-stroke engines.
- Johnson Evinrude Compatibility: Listed for the specified 200 HP and 225 HP 4-stroke models.
- Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
- Combustion Chamber Sealing: Provides the gasket interface between the starboard cylinder head and engine block.
- Matching Port Gasket Available: Pro Marine 9324 is sold separately.
- Dealer Pricing Available: Qualified marine businesses can apply for wholesale pricing.
Frequently Asked Questions
What Suzuki OEM numbers does Pro Marine 9314 replace?
Pro Marine 9314 cross references 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, and 11141-93J10.
What Johnson Evinrude OEM numbers does this gasket replace?
The listed BRP cross references are 5034853, 5035938, and 5036629.
Is Pro Marine 9314 the starboard or port head gasket?
Pro Marine 9314 is the starboard (STBD) cylinder head gasket. It is not the port-side gasket.
What is the matching port-side head gasket?
The matching port-side gasket is Pro Marine 9324 , which cross references Suzuki OEM 11142-93J10.
Does this gasket fit Suzuki DF200 outboards?
Yes. It is listed for select Suzuki DF200 200 HP V6 4-stroke outboards, including DF200, DF200T, and DF200Z applications.
Does this gasket fit Suzuki DF225 outboards?
Yes. It is listed for select Suzuki DF225 225 HP V6 4-stroke outboards, including DF225, DF225T, and DF225Z applications.
Does this gasket fit Suzuki DF250 outboards?
Yes. It is listed for select Suzuki DF250 250 HP V6 4-stroke outboards, including DF250, DF250T, and DF250Z applications. DF250ST applications require additional OEM verification.
Does this gasket fit Johnson and Evinrude 200 HP and 225 HP outboards?
Yes. It is listed for the specific Johnson Evinrude 200 HP and 225 HP 4-stroke model numbers shown in the compatibility table.
Are the starboard and port head gaskets interchangeable?
No. The starboard and port cylinder banks use different head gaskets. Pro Marine 9314 is for the starboard side, while Pro Marine 9324 is for the port side.
Do I need both head gaskets for a V6 engine rebuild?
If both cylinder heads are removed during an engine rebuild, each cylinder bank requires its correct replacement gasket. The starboard and port gaskets are sold separately.
What are common symptoms of a blown head gasket?
Possible symptoms include compression loss, overheating, rough running, water intrusion, and engine oil contamination. Proper diagnostic testing is required to confirm the cause.
Is Pro Marine 9314 a genuine Suzuki OEM gasket?
No. Pro Marine 9314 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning merchandise.
Need Help Confirming Head Gasket Fitment?
If you are unsure whether Pro Marine 9314 is the correct starboard cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
9314, 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, 11141-93J10, 1114193J00, 1114193J01, 1114193J02, 1114193J03, 1114193J10, 5034853, 5035938, 5036629
Searchable Terms
Pro Marine 9314, Suzuki 11141-93J00, Suzuki 11141-93J01, Suzuki 11141-93J02, Suzuki 11141-93J03, Suzuki 11141-93J10, Johnson Evinrude 5034853, Johnson Evinrude 5035938, Johnson Evinrude 5036629, Suzuki starboard head gasket, Suzuki STBD head gasket, Suzuki right cylinder head gasket, Suzuki V6 cylinder head gasket, Suzuki DF200 head gasket, Suzuki DF200T head gasket, Suzuki DF200Z head gasket, Suzuki DF225 head gasket, Suzuki DF225T head gasket, Suzuki DF225Z head gasket, Suzuki DF250 head gasket, Suzuki DF250T head gasket, Suzuki DF250Z head gasket, Suzuki 200HP head gasket, Suzuki 225HP head gasket, Suzuki 250HP head gasket, Suzuki 200-250 HP head gasket, Suzuki 4 stroke head gasket, Suzuki outboard cylinder head gasket, Johnson 200HP head gasket, Johnson 225HP head gasket, Evinrude 200HP head gasket, Evinrude 225HP head gasket, Johnson Evinrude V6 head gasket, BRP starboard head gasket, J200CX4SRS head gasket, J200PX4SRS head gasket, J225CX4SRS head gasket, J225PX4SRS head gasket, BJ200CX4SDC head gasket, BJ200X4SDC head gasket, BJ225CX4SDC head gasket, BJ225X4SDC head gasket, BJ200CX4SO head gasket, BJ200PX4SO head gasket, BJ225CX4SO head gasket, BJ225PX4SO head gasket, J200CX4SOC head gasket, J200PX4SOC head gasket, J225CX4SOC head gasket, J225CZ4SOS head gasket, J225PX4SOC head gasket, J225PZ4SOS head gasket, Suzuki outboard engine rebuild, Suzuki V6 engine repair, Suzuki cylinder head repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts, Pro Marine 9324 matching port gasket
11141-93J01
11141-93J02
11141-93J02
11141-93J03
11141-93J10
5034853
5035938
5036629
5032930
55321-90J00
55321-90J01
Replacement Outboard Zinc Anode
55321-87J10P Zinc Anode for Suzuki, Honda, Tohatsu and Johnson / Evinrude
The 55321-87J10P zinc anode is a replacement sacrificial anode used across a wide range of Suzuki DF outboards and select Honda, Tohatsu, Johnson and Evinrude applications.
It cross-references several OEM anode numbers including 55321-87J00, 55321-87J01, 12155-ZV5-000, 12155-ZV5-010, 5031705, 0778299 and related references.
Part Type: Sacrificial Zinc Anode
OEM or Aftermarket: Aftermarket
Primary Application: Suzuki DF Four-Stroke Outboards
Additional Applications: Honda, Tohatsu, Johnson and Evinrude
Item #: 55321-87J10P
OEM and Cross Reference Numbers
| Part Number | Brand / Reference |
|---|---|
| 55321-87J00 | Suzuki OEM Reference |
| 55321-87J01 | Suzuki OEM Reference |
| 12155-ZV5-000 | Honda OEM Reference |
| 12155-ZV5-010 | Honda OEM Reference |
| HZV5-12155-000 | Cross Reference |
| HZV512155000 | Cross Reference |
| 5031705 | Johnson / Evinrude Reference |
| 0778299 | Johnson / Evinrude Reference |
| 778299 | Johnson / Evinrude Reference |
What This Part is Used For
This zinc anode is part of the corrosion-protection system used on compatible outboard engines. The sacrificial anode is designed to deteriorate in place of more expensive metal engine components exposed to water and the marine environment.
Anodes should be inspected during routine maintenance and replaced when they become substantially deteriorated. The number of 55321-87J10P-style anodes installed on an engine varies by model.
This anode appears across many different outboard models, years and serial-number ranges. The quantity required also varies by engine.
Verify the exact engine model and serial number before ordering the quantity needed for a complete anode service.
Suzuki Outboard Fitment
Supplied application data includes Suzuki DF engines ranging from small portable outboards through DF350A models. Applicable sub-models and serial ranges vary.
| Engine Family | Included Suzuki Applications |
|---|---|
| DF2.5-DF20 | DF2.5, DF4, DF4A, DF5A, DF6, DF6A, DF8A, DF9.9, DF9.9A, DF9.9B, DF15, DF15A and DF20A families |
| DF25-DF60 | DF25, DF25A, DF30, DF30A, DF40, DF40A, DF50, DF50A, DF60 and DF60A families including applicable Q, R, T, TH, QH, TL, VT and related variants |
| DF70-DF100 | DF70, DF70A, DF75, DF80A, DF90, DF90A, DF100, DF100A, DF100B and DF100C families |
| DF115-DF140 | DF115, DF115A, DF115B, DF115BG, DF115BS, DF115BSS, DF115BT, DF115BZ, DF115BZG, DF140, DF140A, DF140B, DF140BG, DF140BT, DF140BZ and DF140BZG |
| DF150-DF200 | DF150, DF150AP, DF150AS, DF150AT, DF150AZ, DF175, DF175AP, DF175AT, DF175AZ, DF200, DF200A, DF200AP, DF200AST, DF200AT, DF200AZ, DF200T and DF200Z |
| DF225-DF300 | DF225, DF225T, DF225Z, DF250, DF250A, DF250AP, DF250ST, DF250T, DF250Z, DF300, DF300A, DF300AP and DF300B families |
| DF325-DF350 | DF325A and DF350A families including applicable MD variants |
Honda Outboard Fitment
The supplied application data includes a broad range of Honda marine engines. Honda fitment is model and VIN specific, so the engine family alone should not be used as the only fitment check.
| Honda Family | Included Models / VIN Families |
|---|---|
| BF25 | BF25A, BF25A1, BF25A2, BF25A3, BF25AW, BF25AX, BF25AY, BF25D4, BF25D5, BF25D6, BF25DK0, BF25DK2 and BF25DK3. Supplied VIN families include BAJL, BAJS, BAJU and BATJ. |
| BF30 | BF30A, BF30A1, BF30A2, BF30A3, BF30AW, BF30AX, BF30AY, BF30D4, BF30D5, BF30D6, BF30DK0, BF30DK2 and BF30DK3. Supplied VIN families include BAWL, BAWS and BAUJ. |
| BF35 / BF40 / BF45 | BF35AM, BF40A, BF40A1-A6, BF40AK0, BF40AW, BF40AX, BF40AY, BF40D, BF40DK2, BF40DK4 and BF45AM. |
| BF50 / BF60 / BFP60 | BF50A, BF50A1-A6, BF50AK0, BF50AW, BF50AX, BF50AY, BF50D, BF50DK2, BF50DK4, BF60A, BF60AK1, BFP60A and BFP60AK1. |
| BF75 / BF90 | BF75A1-A6, BF75AT, BF75AW, BF75AX, BF75AY, BF75DK0, BF75DK2-DK4, BF90A1-A6, BF90AT, BF90AW, BF90AX, BF90AY and BF90DK0-DK5. |
| BF100 / BF115 | BF100A, BF100AK1, BF115AX, BF115AY, BF115A1-A6, BF115AK0, BF115D, BF115DK1 and BF115J. Supplied VIN families include BBMJ, BZBD, BZBG, BBHJ and BBWJ. |
| BF130 / BF135 / BF140 | BF130AX, BF130AY, BF130A1-A4, BF135A4-A6, BF135AK0, BF135AK2 and BF140A. |
| BF150 / BF175 | BF150A4-A6, BF150AK0, BF150AK2, BF150D, BF175AK1 and BF175AK2. |
| BF200 | BF200A2-A6, BF200AK0-AK3 and BF200D. Supplied VIN families include BAEJ, BAFJ and BBRJ. |
| BF225 | BF225A2-A6, BF225AK0-AK3 and BF225D. Supplied VIN families include BAGJ, BAHJ and BBPJ. |
| BF250 | BF250A and BF250D families including L, X, XX, U and counter-rotation variants. Supplied VIN families include BBJJ and BBNJ. |
The attached application data contains specific Honda VIN ranges for many models. Match the model and VIN to the correct application before ordering rather than assuming all engines of the same horsepower use this anode.
Tohatsu Outboard Fitment
The following Tohatsu horsepower and year applications were supplied for this anode:
| Horsepower | Years Listed |
|---|---|
| 60 HP | 2014-2019 |
| 75 HP | 2014-2019 |
| 90 HP | 2014-2019 |
| 115 HP | 2014-2019 |
| 150 HP | 2014-2019 and select 2021-2025 applications |
| 200 HP | 2014-2019 and 2021-2025 |
| 225 HP | 2014-2019 and 2021-2025 |
| 250 HP | 2014-2019 and 2021-2025 |
Johnson and Evinrude Outboard Fitment
The supplied fitment includes numerous Suzuki-built Johnson and Evinrude four-stroke engines. Common application groups are shown below.
| HP Family | Included Model Families |
|---|---|
| 2-6 HP | Select J2, J4, J5 and J6 four-stroke models including R and RL variants. |
| 25-30 HP | E25, E30, J25, J30 and BJ25 families including electric-start, rope-start, tiller, remote and power-trim variants. |
| 40-70 HP | E40, E50, E70, J40, J50, J60, J70 and corresponding BJ40-BJ70 four-stroke families. |
| 90 HP | J90 and BJ90 PL / PX four-stroke families including SDA, SOR, SRC and STS variants. |
| 115 HP | J115 and BJ115 L / PL / PX / X four-stroke model families. |
| 140 HP | J140 and BJ140 CX / L / PL / PX / X four-stroke model families. |
| 200 HP | J200 and BJ200 CX / PX / X four-stroke model families. |
| 225 HP | J225 and BJ225 CX / PX / X / Z four-stroke model families. |
Fitment is based on specific four-stroke model numbers in the supplied application data. Verify the complete engine model number before ordering.
Related Anode Cover O-Rings
When servicing an internal engine anode, inspect the associated anode-cover O-ring. The O-ring should be replaced if it is cut, hardened, flattened, stretched or damaged.
Pro Marine 22019 Anode Cover O-Ring
Pro Marine 22019 is the aftermarket replacement for Suzuki 09280-22019 and is a convenient option when replacing internal anodes during routine service.
View Pro Marine 22019 O-Ring
Suzuki OEM 09280-22019 Anode Cover O-Ring
Prefer a genuine Suzuki sealing component? The OEM 09280-22019 anode cover O-ring is also available separately.
View OEM Suzuki 09280-22019Installation and Service Tips
- Inspect sacrificial engine anodes during scheduled or annual maintenance.
- Replace heavily deteriorated anodes before they are completely consumed.
- Inspect the associated O-ring whenever an anode cover is removed.
- Replace damaged, hardened, flattened or stretched O-rings.
- Confirm how many anodes are required for your specific engine.
- Use the complete engine model and serial or VIN when checking fitment.
- Follow the manufacturer's service procedure when reinstalling anode covers and fasteners.
Key Features and Benefits
- Multi-Brand Application: Fits specified Suzuki, Honda, Tohatsu, Johnson and Evinrude outboards.
- Suzuki Cross Reference: Replaces 55321-87J00 and 55321-87J01 applications.
- Honda Cross Reference: Cross-references 12155-ZV5-000 and 12155-ZV5-010.
- BRP Cross Reference: Cross-references select 5031705 and 0778299 applications.
- Corrosion Protection: Sacrificial zinc helps protect compatible metal components from galvanic corrosion.
- Service O-Rings Available: Both OEM Suzuki and Pro Marine anode-cover O-rings are available separately.
FAQ
What does 55321-87J10P replace?
It cross-references Suzuki 55321-87J00 and 55321-87J01, Honda
12155-ZV5-000 and 12155-ZV5-010, Johnson / Evinrude 5031705
and 0778299, along with additional supplied cross references.
What Suzuki outboards does this anode fit?
The supplied application data includes Suzuki models ranging from DF2.5
through DF350A. Exact sub-model and serial fitment varies, so verify the
full engine model before ordering.
Does this fit Honda outboards?
Yes. The supplied application data includes many Honda families from BF25
through BF250, including specific model and VIN ranges.
Does this fit Tohatsu outboards?
Yes. Supplied fitment includes select Tohatsu 60, 75, 90, 115, 150,
200, 225 and 250 HP applications. Year coverage varies by horsepower.
Does this fit Johnson and Evinrude outboards?
Yes. The supplied fitment includes numerous Suzuki-built Johnson and
Evinrude four-stroke applications from small portable models through
225 HP.
How many zinc anodes does my engine require?
The quantity varies by engine model. Some engines use multiple
55321-87J10P-style anodes, so check the engine diagram or service
information before selecting a quantity.
Should I replace the O-ring when changing the anode?
Inspect the O-ring whenever the anode cover is removed. Replace it if
it is damaged, flattened, hardened or otherwise unsuitable for reuse.
Is an OEM Suzuki O-ring available?
Yes. Suzuki 09280-22019 is available separately. Pro Marine 22019 is
also available as an aftermarket alternative.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming fitment or determining how many anodes your engine requires? Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
55321-87J10P, 55321-87J00, 55321-87J01, HZV5-12155-000, HZV512155000, 12155-ZV5-000, 12155-ZV5-010, 5031705, 0778299, 778299
Searchable Terms
Suzuki zinc anode, Suzuki DF anode, Suzuki DF115 anode, Suzuki DF140 anode, Suzuki DF150 anode, Suzuki DF200 anode, Suzuki DF250 anode, Suzuki DF300 anode, Suzuki DF350 anode, Honda outboard zinc anode, Honda 12155-ZV5-000, Honda BF90 anode, Honda BF115 anode, Honda BF150 anode, Honda BF225 anode, Honda BF250 anode, Tohatsu zinc anode, Tohatsu 150 anode, Tohatsu 200 anode, Tohatsu 225 anode, Tohatsu 250 anode, Johnson four stroke anode, Evinrude four stroke anode, 5031705 anode, 0778299 anode, outboard sacrificial zinc anode
HZV5-12155-010
HZV512155000
HZV512155010
0778299
12155-ZV5-000
5031705
55321-87J00
55321-87J01
778299
09289-05006
09289-05012
30X-12119-00-00
371-12119-01-00
51Y-12119-00-00
6EE-E2119-00-00
822647
OEM Suzuki Water Outlet Gasket
Suzuki Cooling System Water Outlet Gasket
This genuine OEM Suzuki water outlet gasket is used on select Suzuki DF-series outboards within the engine cooling system water outlet assembly.
The gasket helps create a proper seal between the water outlet housing and cooling system components to help prevent cooling system leaks and maintain proper engine water circulation.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Suzuki DF150 | FourStroke | Cooling System | Used in compatible water outlet housing assemblies |
| Suzuki DF175 | FourStroke | Cooling System | Used in compatible water outlet housing assemblies |
| Suzuki DF200 | FourStroke | Cooling System | Used in compatible water outlet housing assemblies |
| Suzuki DF225 | FourStroke | Cooling System | Used in compatible cooling system applications |
| Suzuki DF250 | FourStroke | Cooling System | Used in compatible cooling system applications |
| Suzuki DF300 | FourStroke | Cooling System | Used in compatible cooling system applications |
| Johnson / Evinrude | Select Rebadged Suzuki Models | Cooling System | Cross references BRP part number 5035048 |
Always verify your engine model, serial number, and cooling system diagram before ordering engine gaskets and seals.
OEM Part Numbers & Cross References
| Brand | Part Number |
|---|---|
| Suzuki OEM | 17582-93J00 |
| Johnson / Evinrude | 5035048 |
| Alternate Search Format | 1758293J00 |
What This Water Outlet Gasket is Used For
This gasket is used in the cooling system water outlet assembly on compatible Suzuki DF-series outboards.
The gasket helps seal mating surfaces within the cooling system to help maintain proper water circulation and cooling system pressure.
A worn or damaged cooling system gasket may allow water leaks, improper sealing, or cooling performance issues.
Replacing cooling system gaskets during service or repair helps maintain reliable engine cooling system operation.
Key Features and Benefits
- Genuine OEM Suzuki cooling system gasket
- Fits select Suzuki DF150-DF300 outboards
- Used in compatible water outlet housing assemblies
- Cross references Johnson / Evinrude part number 5035048
- Helps maintain proper cooling system sealing
- Helps reduce cooling system leaks
- OEM fit and material compatibility
- Sold individually
Water Outlet Gasket Details
- Brand: Suzuki
- Part Type: Water Outlet Gasket
- OEM Part Number: 17582-93J00
- Cross Reference: Johnson / Evinrude 5035048
- Application: Suzuki DF-Series Cooling Systems
- System: Engine Cooling System
- Quantity Sold: Each
FAQ
What engines does this gasket fit?
This gasket fits select Suzuki DF150 through DF300 outboards using compatible cooling system water outlet assemblies.
What does this gasket seal?
It seals the water outlet housing area within the outboard cooling system.
Does this cross reference Johnson / Evinrude part numbers?
Yes. This Suzuki gasket cross references Johnson / Evinrude OEM part number 5035048.
Can a damaged water outlet gasket cause cooling system leaks?
Yes. A worn or damaged gasket may allow water leakage or improper cooling system sealing.
Should I verify my serial number before ordering?
Yes. Suzuki used different cooling system components depending on model and production range, so diagram verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Cooling system gaskets should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
17582-93J00, 1758293J00, 5035048, Suzuki water outlet gasket, Suzuki cooling gasket, Suzuki DF150 gasket, Suzuki DF175 gasket, Suzuki DF200 gasket, Suzuki DF225 gasket, Suzuki DF250 gasket, Suzuki DF300 gasket, Suzuki cooling system gasket, Suzuki water housing gasket, Johnson Evinrude 5035048, outboard cooling gasket
18-0793
5035048
15170-99E0V
15170-99E00
15170-99E1V
5030699
5032321
