S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Genuine Yamaha OEM Connecting Rod Bolt
Yamaha F75, F80, F90 & F100 Connecting Rod Bolt - 67F-11654-00-00
The Yamaha 67F-11654-00-00 Rod Bolt is a genuine OEM connecting rod fastener for select Yamaha four-stroke outboard engines.
Verified applications include select F75, F80, F90 and F100 four-stroke models from the late 1990s through the mid-2000s.
Because Yamaha used different connecting rod and rod-bolt designs across similar horsepower families, verify the complete engine model before ordering.
OEM Number: 67F-11654-00-00
Component: Connecting Rod Bolt
Engine Families: F75, F80, F90 and F100
OEM Number
| Brand / Type | Part Number |
|---|---|
| Yamaha OEM | 67F-11654-00-00 |
Yamaha Outboard Fitment
| Engine Family | Verified Models |
|---|---|
| F75 |
F75TLRB - 2003 F75TLRC - 2004 F75TLRD - 2005 |
| F80 |
F80TLRX - 1999 F80TXRX - 1999 F80TLRY - 2000 F80TXRY - 2000 F80TLRZ - 2001 F80TJRA - 2002 F80TLRA - 2002 F80TJRB - 2003 F80TLRB - 2003 |
| F90 |
F90TJRB - 2003 F90TLRB - 2003 F90TJRC - 2004 F90TLRC - 2004 F90TJRD - 2005 F90TLRD - 2005 F90TXRD - 2005 |
| F100 |
F100TLRX - 1999 F100TXRX - 1999 F100TLRY - 2000 F100TXRY - 2000 F100TLRZ - 2001 F100TXRZ - 2001 F100TLRA - 2002 F100TXRA - 2002 F100TLRB - 2003 F100TXRB - 2003 |
Do not select a connecting rod bolt by horsepower alone. Yamaha used different connecting rod and fastener configurations across similar engine families.
Verify the complete model number and confirm the application calls for 67F-11654-00-00 before ordering.
What This Part is Used For
The connecting rod bolt secures the connecting rod cap to the connecting rod around the crankshaft journal.
This fastener is subjected to repeated tensile and cyclic loading as the piston and connecting rod accelerate and decelerate during engine operation. Correct bolt condition and installation are critical during a powerhead rebuild.
When Should a Rod Bolt Be Replaced?
Connecting rod bolts should be inspected whenever the connecting rod is removed during engine disassembly.
Follow the Yamaha service manual for the exact model for reuse criteria, tightening sequence and torque procedure. If Yamaha specifies replacement after removal, install a new bolt rather than reusing the original fastener.
Inspect During Connecting Rod Service
- Connecting rod big-end bore
- Connecting rod cap mating surfaces
- Connecting rod bearing condition
- Crankshaft rod journal condition
- Rod bolt threads
- Rod bolt seating surfaces
- Piston pin and small-end bore
- Piston condition
Powerhead Rebuild Installation Notes
Internal engine fasteners should always be installed according to the Yamaha service procedure for the exact engine being rebuilt.
Keep each connecting rod cap matched to its original connecting rod and orientation, and verify crankshaft journal and bearing clearances before final assembly.
Do not substitute another Yamaha rod bolt simply because it appears physically similar.
Shop Yamaha Engine Rebuild Parts by Model
Pro Marine stocks pistons, rings, connecting rod bearings, crankshaft bearings, rod bolts, cylinder sleeves, valves, gaskets and other internal Yamaha four-stroke engine components.
Yamaha Outboard Engine Rebuild Parts by Model
Browse Yamaha rebuild parts by engine family and horsepower to locate the correct internal components for your powerhead.
Key Features
- Genuine Yamaha OEM connecting rod bolt
- OEM number 67F-11654-00-00
- Fits select Yamaha F75 applications
- Fits select Yamaha F80 applications
- Fits select Yamaha F90 applications
- Fits select Yamaha F100 applications
- Verified fitment spans 1999-2005 model applications
- Used to secure the connecting rod cap to the connecting rod
- Designed for internal Yamaha four-stroke powerhead service
FAQ
What is the OEM number for this Yamaha rod bolt?
The OEM number is 67F-11654-00-00.
Is this a genuine Yamaha part?
Yes. This listing is for a genuine Yamaha OEM connecting rod bolt.
Does 67F-11654-00-00 fit Yamaha F75?
Yes. Verified applications include F75TLRB, F75TLRC and F75TLRD models
from 2003-2005.
Does it fit Yamaha F80?
Yes. Select F80 applications from 1999 through 2003
are included in the verified fitment.
Does it fit Yamaha F90?
Yes. Verified applications include select F90 models from
2003 through 2005.
Does it fit Yamaha F100?
Yes. Verified F100 applications range from
1999 through 2003.
Can I reuse my original connecting rod bolt?
Follow the Yamaha service manual for the exact engine. If Yamaha specifies
replacement after removal, or if the bolt is damaged or questionable,
install a new OEM bolt.
Should I verify my full Yamaha model number?
Yes. Yamaha used different rod bolts across similar horsepower engines, so
the complete model designation should be verified before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning parts.
Need help verifying fitment?
Contact Pro Marine
Phone: 941-721-3000
Searchable Part Numbers & Terms
67F-11654-00-00, 67F116540000, Yamaha 67F-11654, Yamaha rod bolt, Yamaha connecting rod bolt, Yamaha F75 rod bolt, Yamaha F80 rod bolt, Yamaha F90 rod bolt, Yamaha F100 rod bolt, F75 connecting rod bolt, F80 connecting rod bolt, F90 connecting rod bolt, F100 connecting rod bolt, Yamaha four stroke rod bolt, Yamaha powerhead rod bolt, Yamaha connecting rod fastener, Yamaha engine rebuild parts, Yamaha powerhead rebuild parts
6H4-11610-20-00
Pro Marine Yamaha 4-Stroke Rod Bearing Set
Yamaha F115 4-Stroke Rod Bearing Set - 4CYLSSROD
The Pro Marine 4CYLSSROD Rod Bearing Set is designed for Yamaha 4-stroke F115 outboard rebuilds. These Pro Marine Yamaha 4-stroke bearings help simplify engine assembly because you do not need to select Yamaha bearing color codes or use Plastigauge for sizing.
With Pro Marine Yamaha 4-stroke bearings, the rod bearings are one-size-fit-all for the listed application. This makes them a practical choice for powerhead rebuilds, crankshaft service, and connecting rod bearing replacement.
Required Oil - Yamaha FC-W 20W40
You must use Yamaha FC-W 20W40 engine oil when using these Pro Marine Yamaha 4-stroke rod bearings.
This oil requirement applies to the Pro Marine Yamaha 4-stroke rod bearing sets and the matching main bearing set. Do not substitute a different oil viscosity when assembling or running these bearings.
Compatible Applications
| Engine Family | Application |
|---|---|
| Yamaha F115 4-Stroke | Rod bearing set |
This rod bearing set is for Yamaha 4-stroke F115 applications using the matching Pro Marine bearing system. Always verify your Yamaha model, serial number, and original OEM bearing references before ordering internal engine parts.
Pro Marine Yamaha 4-stroke bearings do not require Yamaha color-code selection or Plastigauge sizing.
OEM & Cross Reference Numbers
| OEM Number | Type |
|---|---|
| 6D8-11654-00-00 | Yamaha Rod Bearing Reference |
| 6D8-11654-10-00 | Yamaha Rod Bearing Reference |
| 6D8-11654-20-00 | Yamaha Rod Bearing Reference |
| 6D8-11654-30-00 | Yamaha Rod Bearing Reference |
| 6D8-11654-40-00 | Yamaha Rod Bearing Reference |
Matching Main Bearing Set
Pro Marine 4CYLSSMAIN Main Bearing Set
Matching Pro Marine main bearing set for Yamaha F75-F115 4-stroke rebuilds. Use this main bearing set with the correct rod bearing set when servicing the crankshaft and connecting rods.
Required Yamaha FC-W 20W40 Engine Oil
This is not optional: Pro Marine requires Yamaha FC-W 20W40 engine oil when using these Yamaha 4-stroke bearings.
Yamaha FC-W 20W40 Engine Oil - Gallon
Required Yamaha FC-W 20W40 engine oil for use with these Pro Marine Yamaha 4-stroke rod bearings.
Yamaha FC-W 20W40 Engine Oil - Quart
Quart-size Yamaha FC-W 20W40 oil for topping off, break-in service, or ordering the exact amount needed for your rebuild.
Popular Yamaha F75-F115 Rebuild Parts
Customers rebuilding Yamaha F75-F115 4-stroke powerheads often replace related piston, ring, valve, gasket, and rod bolt components during the same repair.
Vertex Standard Piston Kit
Standard-size piston kit for Yamaha F75-F115 rebuild work.
Vertex .010 Oversize Piston Kit
.010 oversize piston kit for machined-cylinder rebuilds.
Vertex .020 Oversize Piston Kit
.020 oversize piston kit for larger-bore rebuild applications.
STD OEM Ring Kit
Standard-size OEM piston ring kit for Yamaha rebuild service.
.010 Oversize OEM Ring Kit
OEM .25mm / .010 oversize ring kit for oversize piston rebuilds.
Intake Valve Seal
Replacement intake valve seal for Yamaha 4-stroke rebuild service.
Exhaust Valve Seal
Replacement exhaust valve seal for Yamaha 4-stroke rebuild service.
Cylinder Head Gasket
Replacement head gasket for Yamaha F75-F115 powerhead service.
Powerhead Gasket Kit
Powerhead gasket kit for Yamaha F75-F115 rebuild and reassembly work.
What This Part is Used For
Rod bearings support the connecting rods on the crankshaft journals inside the Yamaha 4-stroke powerhead. During a rebuild, worn or damaged rod bearings should be replaced to help restore proper crankshaft support, oil clearance, and long-term engine reliability.
This Pro Marine rod bearing set is designed to make Yamaha F115 rebuilds more straightforward by removing the need to match Yamaha bearing color codes or measure each location with Plastigauge.
Key Features and Benefits
- Pro Marine Yamaha 4-stroke rod bearing set
- Part number 4CYLSSROD
- Designed for Yamaha F115 4-stroke rebuild applications
- One-size bearing set for the listed application
- No Yamaha bearing color-code selection required
- No Plastigauge needed
- Matching 4CYLSSMAIN main bearing set linked above
- Must be used with Yamaha FC-W 20W40 engine oil
FAQ
What engine does this rod bearing set fit?
This set is for Yamaha F115 4-stroke applications using the matching Pro Marine
bearing system.
Do I need to select Yamaha bearing color codes?
No. These Pro Marine Yamaha 4-stroke bearings do not require Yamaha color-code
selection.
Do I need Plastigauge?
No. Pro Marine Yamaha 4-stroke bearings do not require Plastigauge sizing.
What oil must be used with these bearings?
You must use Yamaha FC-W 20W40 engine oil. Links to the gallon
and quart are included above.
Which main bearing set goes with this rod bearing set?
The matching main bearing set is 4CYLSSMAIN, linked above.
Should I verify fitment?
Yes. Always verify your Yamaha model, serial number, and internal engine part
requirements before ordering rebuild components.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
4CYLSSROD, Yamaha F115 rod bearing set, Yamaha F115 rod bearings, Yamaha 4 stroke rod bearings, Pro Marine Yamaha bearings, Yamaha no color code bearings, Yamaha no Plastigauge bearings, Yamaha F115 rebuild bearings, Yamaha connecting rod bearings, Yamaha crankshaft bearings, 4CYLSSMAIN, Yamaha main bearing set, FC2040, FC2040-QT, Yamaha FC-W 20W40 oil, 24228STD, 24228025, 24228050, 11605, 11606, RB115, 68V-12111P, A3721, 68V-12121P, A3722, 67F-12114P, 67111, 6803
68V-11656-10-00
68V-11656-20-00
68V-11656-30-00
67F-11325-01-00
804079
804079001
804085A01
887847A01
67F-11328-01-00
804086