Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Outboard Motor Parts | OEM & Aftermarket

Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.

Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.

 

Shop Outboard Parts by Manufacturer

 

Find the Correct Outboard Part

Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.

Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »
 

Shop Outboard Parts by Engine System

Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.

 

Common Outboard Problems and Where to Start

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
  • Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
  • Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
  • Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
  • Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
  • Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
 

Why Buy Outboard Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for major outboard engine brands.
  • Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
  • Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
 

OEM and Aftermarket Outboard Parts

OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.

Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.

 

Frequently Asked Questions

How do I find the correct parts for my outboard motor?

Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.

Can I search Pro Marine by OEM part number?

Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

What information should I have before ordering an outboard part?

Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.

What is the difference between OEM and aftermarket outboard parts?

OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.

Are aftermarket outboard motor parts reliable?

Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.

Do you carry parts for older outboard motors?

Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.

What outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.

 

Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.

|◀ ◀ 3649 - 3660 of 8466 ▶ ▶|
View:
Mercury 2.5L Bottom Guided Bore 3.530
Item#:
V2430S
Manufacturer:
Vertex
Available:
In Stock
Your Price:
145.23
Each
Mercury 2.5L Bottom Guided Bore 3.530
Item#:
V2430P
Manufacturer:
Vertex
Available:
Out of Stock
ETA:
04/20/2027
Your Price:
145.23
Each
Mercury 3.0L 250HP 02-04 Opti Max Bore 3.655
Item#:
N9130SV
Cross Reference#:
889642A02
Available:
Special Order
Your Price:
124.35
Each
Mercury L3 L4 Big Bore Top Guide Bore 3.520
Item#:
3162P2
Cross Reference#:
9-53251
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
193.76
Each
Mercury L3 L4 Big Bore Top Guide Bore 3.544
Item#:
3162P4
Cross Reference#:
9-53253
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
193.76
Each
Mercury 225-300 3.0 EFI Fits 1998-2002
Item#:
18715
Cross Reference#:
18715T1
187151
805225A1
Manufacturer Item:
805225A1
Manufacturer:
Mercury Marine
Available:
Out of Stock
ETA:
07/12/2026
Your Price:
318.99
Each
Yamaha V4 V6
Item#:
1600C
Cross Reference#:
6E5-11634-00-00
Manufacturer Item:
6E5-11634-00-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.05
Each
Yamaha V4 V6 Bore Size 3.544
Item#:
1600P
Cross Reference#:
18-4128
6G5-11642-00-93
6G5-11642-00-94
6K7-11642-01-93
6R5-11642-01-93
9-53820
Manufacturer Item:
6G5-11642-00-93
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
80.19
Each
Yamaha V4 V6 Bore Size 3.544
Item#:
1600S
Cross Reference#:
18-4129
6G5-11631-00-93
6K7-11631-01-93
6R5-11631-01-93
9-53821
Manufacturer Item:
6G5-11631-00-93
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
80.19
Each
One-Size Fits All Pro Marine Rod Bearings - No Color Codes

Pro Marine Yamaha 4-Stroke Rod Bearing Set

Yamaha F75-F100 4-Stroke Rod Bearing Set - F75SSROD

The Pro Marine F75SSROD Rod Bearing Set is designed for Yamaha 4-stroke F75, F90, and F100 outboard rebuilds. These Pro Marine Yamaha 4-stroke bearings simplify assembly because you do not need to select Yamaha bearing color codes or use Plastigauge for sizing.

With Pro Marine Yamaha 4-stroke bearings, the rod bearings are one-size-fit-all for the listed F75-F100 application.

Required Oil - Yamaha FC-W 20W40

You must use Yamaha FC-W 20W40 engine oil when using these Pro Marine Yamaha 4-stroke rod bearings.

This oil requirement applies to the Pro Marine Yamaha 4-stroke rod bearing sets and the matching main bearing set. Do not substitute a different oil viscosity when assembling or running these bearings.

Compatible Applications

Engine Family Application
Yamaha F75 4-Stroke Rod bearing set
Yamaha F90 4-Stroke Rod bearing set
Yamaha F100 4-Stroke Rod bearing set
Important Fitment Note:

This rod bearing set is for Yamaha 4-stroke F75-F100 applications using the matching Pro Marine bearing system. Always verify your Yamaha model, serial number, and original OEM bearing references before ordering internal engine parts.

Pro Marine Yamaha 4-stroke bearings do not require Yamaha color-code selection or Plastigauge sizing.

OEM & Cross Reference Numbers

OEM Number Type
67F-11654-00-00Yamaha Rod Bearing Reference
67F-11654-10-00Yamaha Rod Bearing Reference
67F-11654-20-00Yamaha Rod Bearing Reference
67F-11654-30-00Yamaha Rod Bearing Reference

Matching Main Bearing Set

Pro Marine 4CYLSSMAIN Main Bearing Set

Matching Pro Marine main bearing set for Yamaha F75-F115 4-stroke rebuilds. Use this main bearing set with the correct rod bearing set when servicing the crankshaft and connecting rods.

View 4CYLSSMAIN Main Bearing Set

Required Yamaha FC-W 20W40 Engine Oil

This is not optional: Pro Marine requires Yamaha FC-W 20W40 engine oil when using these Yamaha 4-stroke bearings.

FC-W 20W40 Gallon

Yamaha FC-W 20W40 Engine Oil - Gallon

Required Yamaha FC-W 20W40 engine oil for use with these Pro Marine Yamaha 4-stroke rod bearings.

View Yamaha FC-W 20W40 Gallon

FC-W 20W40 Quart

Yamaha FC-W 20W40 Engine Oil - Quart

Quart-size Yamaha FC-W 20W40 oil for topping off, break-in service, or ordering the exact amount needed for your rebuild.

View Yamaha FC-W 20W40 Quart

Popular Yamaha F75-F115 Rebuild Parts

Customers rebuilding Yamaha F75-F115 4-stroke powerheads often replace related piston, ring, valve, gasket, and rod bolt components during the same repair.

STD Piston Kit

Vertex Standard Piston Kit

Standard-size piston kit for Yamaha F75-F115 rebuild work.

View Standard Piston Kit

.010 Piston Kit

Vertex .010 Oversize Piston Kit

.010 oversize piston kit for machined-cylinder rebuilds.

View .010 Oversize Piston Kit

.020 Piston Kit

Vertex .020 Oversize Piston Kit

.020 oversize piston kit for larger-bore rebuild applications.

View .020 Oversize Piston Kit

STD Ring Kit

STD OEM Ring Kit

Standard-size OEM piston ring kit for Yamaha rebuild service.

View STD OEM Ring Kit

.010 Ring Kit

.010 Oversize OEM Ring Kit

OEM .25mm / .010 oversize ring kit for oversize piston rebuilds.

View .010 Oversize OEM Ring Kit

Rod Bolt

Rod Bolt

Replacement connecting rod bolt for Yamaha F75-F115 rebuild work.

View Rod Bolt

Intake Valve

Intake Valve

Replacement intake valve, 96.9mm length and 29mm head diameter.

View Intake Valve

Intake Seal

Intake Valve Seal

Replacement intake valve seal for Yamaha 4-stroke rebuild service.

View Intake Valve Seal

Exhaust Valve

Exhaust Valve

Replacement exhaust valve, 99.3mm length and 23.9mm head diameter.

View Exhaust Valve

Exhaust Seal

Exhaust Valve Seal

Replacement exhaust valve seal for Yamaha 4-stroke rebuild service.

View Exhaust Valve Seal

Valve Spring

Valve Spring

Replacement valve spring for Yamaha F75-F115 cylinder head service.

View Valve Spring

Head Gasket

Cylinder Head Gasket

Replacement head gasket for Yamaha F75-F115 powerhead service.

View Head Gasket

Powerhead Gasket Kit

Powerhead Gasket Kit

Powerhead gasket kit for Yamaha F75-F115 rebuild and reassembly work.

View Powerhead Gasket Kit

What This Part is Used For

Rod bearings support the connecting rods on the crankshaft journals inside the Yamaha 4-stroke powerhead. During a rebuild, worn or damaged rod bearings should be replaced to help restore proper crankshaft support, oil clearance, and long-term engine reliability.

This Pro Marine rod bearing set is designed to make Yamaha F75-F100 rebuilds more straightforward by removing the need to match Yamaha bearing color codes or measure each location with Plastigauge.

Key Features and Benefits

  • Pro Marine Yamaha 4-stroke rod bearing set
  • Part number F75SSROD
  • Designed for Yamaha F75, F90, and F100 4-stroke rebuild applications
  • One-size bearing set for the listed F75-F100 application
  • No Yamaha bearing color-code selection required
  • No Plastigauge needed
  • Matching 4CYLSSMAIN main bearing set linked above
  • Must be used with Yamaha FC-W 20W40 engine oil

FAQ

What engines does this rod bearing set fit?
This set is for Yamaha F75, F90, and F100 4-stroke applications using the matching Pro Marine bearing system.

Do I need to select Yamaha bearing color codes?
No. These Pro Marine Yamaha 4-stroke bearings do not require Yamaha color-code selection.

Do I need Plastigauge?
No. Pro Marine Yamaha 4-stroke bearings do not require Plastigauge sizing.

What oil must be used with these bearings?
You must use Yamaha FC-W 20W40 engine oil. Links to the gallon and quart are included above.

Which main bearing set goes with this rod bearing set?
The matching main bearing set is 4CYLSSMAIN, linked above.

Is this the correct rod bearing set for F115?
No. For Yamaha F115 applications, use the Pro Marine 4CYLSSROD rod bearing set instead.

Should I verify fitment?
Yes. Always verify your Yamaha model, serial number, and internal engine part requirements before ordering rebuild components.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

F75SSROD, Yamaha F75 rod bearing set, Yamaha F90 rod bearing set, Yamaha F100 rod bearing set, Yamaha F75 rod bearings, Yamaha F90 rod bearings, Yamaha F100 rod bearings, Yamaha 4 stroke rod bearings, Pro Marine Yamaha bearings, Yamaha no color code bearings, Yamaha no Plastigauge bearings, Yamaha connecting rod bearings, Yamaha crankshaft bearings, 67F-11654-00-00, 67F-11654-10-00, 67F-11654-20-00, 67F-11654-30-00, 4CYLSSMAIN, Yamaha main bearing set, FC2040, FC2040-QT, Yamaha FC-W 20W40 oil, 24228STD, 24228025, 24228050, 11605, 11606, RB115, 68V-12111P, A3721, 68V-12121P, A3722, 67F-12114P, 67111, 6803

Item#:
F75SSROD
Cross Reference#:
6D8-11656-00-00
6D8-11656-10-00
6D8-11656-20-00
6D8-11656-30-00
67F-11656-00-00
67F-11656-10-00
67F-11656-20-00
67F-11656-30-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
77.25
Each
Item#:
10-785-1
Manufacturer Item:
27-18785
Manufacturer:
Mercury Marine
Available:
Special Order
Your Price:
20.13
Each
Yamaha 40-50hp 3cyl 1995-UP
Item#:
2144-1
Cross Reference#:
18-99061
63D-W0001-00-00
63D-W0001-01-00
63D-W0001-02-00
Manufacturer Item:
63D-W0001-01-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
85.68
Each
|◀ ◀ 3649 - 3660 of 8466 ▶ ▶|
View: